Messages in this thread Patch in this message | | | From | Amit Kucheria <> | Subject | [PATCH 06/11] thermal: mediatek: Appease the kernel-doc deity | Date | Wed, 6 Nov 2019 18:58:22 +0530 |
| |
Replace a comment starting with /** by simply /* to avoid having it interpreted as a kernel-doc comment. Describe missing function parameters where needed.
Fixes up the following warnings when compiled with make W=1:
linux.git/drivers/thermal/mtk_thermal.c:374: warning: cannot understand function prototype: 'const struct mtk_thermal_data mt8173_thermal_data = ' linux.git/drivers/thermal/mtk_thermal.c:413: warning: cannot understand function prototype: 'const struct mtk_thermal_data mt2701_thermal_data = ' linux.git/drivers/thermal/mtk_thermal.c:443: warning: cannot understand function prototype: 'const struct mtk_thermal_data mt2712_thermal_data = ' linux.git/drivers/thermal/mtk_thermal.c:499: warning: cannot understand function prototype: 'const struct mtk_thermal_data mt8183_thermal_data = ' linux.git/drivers/thermal/mtk_thermal.c:529: warning: Function parameter or member 'sensno' not described in 'raw_to_mcelsius'
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> --- drivers/thermal/mtk_thermal.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c index acf4854cbb8b8..76e30603d4d58 100644 --- a/drivers/thermal/mtk_thermal.c +++ b/drivers/thermal/mtk_thermal.c @@ -358,7 +358,7 @@ static const int mt7622_mux_values[MT7622_NUM_SENSORS] = { 0, }; static const int mt7622_vts_index[MT7622_NUM_SENSORS] = { VTS1 }; static const int mt7622_tc_offset[MT7622_NUM_CONTROLLER] = { 0x0, }; -/** +/* * The MT8173 thermal controller has four banks. Each bank can read up to * four temperature sensors simultaneously. The MT8173 has a total of 5 * temperature sensors. We use each bank to measure a certain area of the @@ -400,7 +400,7 @@ static const struct mtk_thermal_data mt8173_thermal_data = { .sensor_mux_values = mt8173_mux_values, }; -/** +/* * The MT2701 thermal controller has one bank, which can read up to * three temperature sensors simultaneously. The MT2701 has a total of 3 * temperature sensors. @@ -430,7 +430,7 @@ static const struct mtk_thermal_data mt2701_thermal_data = { .sensor_mux_values = mt2701_mux_values, }; -/** +/* * The MT2712 thermal controller has one bank, which can read up to * four temperature sensors simultaneously. The MT2712 has a total of 4 * temperature sensors. @@ -484,7 +484,7 @@ static const struct mtk_thermal_data mt7622_thermal_data = { .sensor_mux_values = mt7622_mux_values, }; -/** +/* * The MT8183 thermal controller has one bank for the current SW framework. * The MT8183 has a total of 6 temperature sensors. * There are two thermal controller to control the six sensor. @@ -495,7 +495,6 @@ static const struct mtk_thermal_data mt7622_thermal_data = { * data, and this indeed needs the temperatures of the individual banks * for making better decisions. */ - static const struct mtk_thermal_data mt8183_thermal_data = { .auxadc_channel = MT8183_TEMP_AUXADC_CHANNEL, .num_banks = MT8183_NUM_SENSORS_PER_ZONE, @@ -519,7 +518,8 @@ static const struct mtk_thermal_data mt8183_thermal_data = { /** * raw_to_mcelsius - convert a raw ADC value to mcelsius - * @mt: The thermal controller + * @mt: The thermal controller + * @sensno: sensor number * @raw: raw ADC value * * This converts the raw ADC value to mcelsius using the SoC specific -- 2.17.1
| |