lkml.org 
[lkml]   [2019]   [Nov]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 18/20] mtd: spi-nor: Rename macronix_quad_enable to spi_nor_sr1_bit6_quad_enable
From
Date


On 02/11/19 4:53 PM, Tudor.Ambarus@microchip.com wrote:
> From: Tudor Ambarus <tudor.ambarus@microchip.com>
>
> Rename method to a generic name: spi_nor_sr1_bit6_quad_enable().
>
> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>

Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>

Regards
Vignesh

> ---
> drivers/mtd/spi-nor/spi-nor.c | 19 +++++++++----------
> include/linux/mtd/spi-nor.h | 2 +-
> 2 files changed, 10 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> index 8bc29cc073a0..85e5a56fb2d7 100644
> --- a/drivers/mtd/spi-nor/spi-nor.c
> +++ b/drivers/mtd/spi-nor/spi-nor.c
> @@ -2078,16 +2078,15 @@ static int spi_nor_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
> }
>
> /**
> - * macronix_quad_enable() - set QE bit in Status Register.
> + * spi_nor_sr1_bit6_quad_enable() - Set the Quad Enable BIT(6) in the Status
> + * Register 1.
> * @nor: pointer to a 'struct spi_nor'
> *
> - * Set the Quad Enable (QE) bit in the Status Register.
> - *
> - * bit 6 of the Status Register is the QE bit for Macronix like QSPI memories.
> + * Bit 6 of the Status Register 1 is the QE bit for Macronix like QSPI memories.
> *
> * Return: 0 on success, -errno otherwise.
> */
> -static int macronix_quad_enable(struct spi_nor *nor)
> +static int spi_nor_sr1_bit6_quad_enable(struct spi_nor *nor)
> {
> int ret;
>
> @@ -2095,10 +2094,10 @@ static int macronix_quad_enable(struct spi_nor *nor)
> if (ret)
> return ret;
>
> - if (nor->bouncebuf[0] & SR_QUAD_EN_MX)
> + if (nor->bouncebuf[0] & SR1_QUAD_EN_BIT6)
> return 0;
>
> - nor->bouncebuf[0] |= SR_QUAD_EN_MX;
> + nor->bouncebuf[0] |= SR1_QUAD_EN_BIT6;
>
> return spi_nor_write_sr1_and_check(nor, nor->bouncebuf[0]);
> }
> @@ -2349,7 +2348,7 @@ static void gd25q256_default_init(struct spi_nor *nor)
> * indicate the quad_enable method for this case, we need
> * to set it in the default_init fixup hook.
> */
> - nor->params.quad_enable = macronix_quad_enable;
> + nor->params.quad_enable = spi_nor_sr1_bit6_quad_enable;
> }
>
> static struct spi_nor_fixups gd25q256_fixups = {
> @@ -3729,7 +3728,7 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
>
> case BFPT_DWORD15_QER_SR1_BIT6:
> nor->flags &= ~SNOR_F_HAS_16BIT_SR;
> - params->quad_enable = macronix_quad_enable;
> + params->quad_enable = spi_nor_sr1_bit6_quad_enable;
> break;
>
> case BFPT_DWORD15_QER_SR2_BIT7:
> @@ -4627,7 +4626,7 @@ static int spi_nor_setup(struct spi_nor *nor,
>
> static void macronix_set_default_init(struct spi_nor *nor)
> {
> - nor->params.quad_enable = macronix_quad_enable;
> + nor->params.quad_enable = spi_nor_sr1_bit6_quad_enable;
> nor->params.set_4byte = macronix_set_4byte;
> }
>
> diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
> index f626e0e52909..6d703df97f13 100644
> --- a/include/linux/mtd/spi-nor.h
> +++ b/include/linux/mtd/spi-nor.h
> @@ -133,7 +133,7 @@
> #define SR_E_ERR BIT(5)
> #define SR_P_ERR BIT(6)
>
> -#define SR_QUAD_EN_MX BIT(6) /* Macronix Quad I/O */
> +#define SR1_QUAD_EN_BIT6 BIT(6)
>
> /* Enhanced Volatile Configuration Register bits */
> #define EVCR_QUAD_EN_MICRON BIT(7) /* Micron Quad I/O */
>

--
Regards
Vignesh

\
 
 \ /
  Last update: 2019-11-06 07:00    [W:0.234 / U:0.508 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site