lkml.org 
[lkml]   [2019]   [Nov]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] dpaa2-ptp: fix compile error
Date
From: Chenwandun <chenwandun@huawei.com>

phylink_set_port_modes will be compiled if CONFIG_PHYLINK enabled,
dpaa2_mac_validate will be compiled if CONFIG_FSL_DPAA2_ETH enabled,
it should select CONFIG_PHYLINK when dpaa2_mac_validate call
phylink_set_port_modes

drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.o: In function `dpaa2_mac_validate':
dpaa2-mac.c:(.text+0x3a1): undefined reference to `phylink_set_port_modes'
drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.o: In function `dpaa2_mac_connect':
dpaa2-mac.c:(.text+0x91a): undefined reference to `phylink_create'
dpaa2-mac.c:(.text+0x94e): undefined reference to `phylink_of_phy_connect'
dpaa2-mac.c:(.text+0x97f): undefined reference to `phylink_destroy'
drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.o: In function `dpaa2_mac_disconnect':
dpaa2-mac.c:(.text+0xa9f): undefined reference to `phylink_disconnect_phy'
dpaa2-mac.c:(.text+0xab0): undefined reference to `phylink_destroy'
make: *** [vmlinux] Error 1
---
drivers/net/ethernet/freescale/dpaa2/Kconfig | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/freescale/dpaa2/Kconfig b/drivers/net/ethernet/freescale/dpaa2/Kconfig
index fbef282..c6fb8e4 100644
--- a/drivers/net/ethernet/freescale/dpaa2/Kconfig
+++ b/drivers/net/ethernet/freescale/dpaa2/Kconfig
@@ -2,6 +2,7 @@
config FSL_DPAA2_ETH
tristate "Freescale DPAA2 Ethernet"
depends on FSL_MC_BUS && FSL_MC_DPIO
+ select PHYLINK
help
This is the DPAA2 Ethernet driver supporting Freescale SoCs
with DPAA2 (DataPath Acceleration Architecture v2).
--
2.7.4
\
 
 \ /
  Last update: 2019-11-05 16:14    [W:0.031 / U:0.672 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site