lkml.org 
[lkml]   [2019]   [Nov]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/7] dt-bindings: pwm: allwinner: Add H6 PWM description
Hi Clement, Uwe,

On Mon, Nov 04, 2019 at 09:03:59AM +0100, Uwe Kleine-König wrote:
> On Sun, Nov 03, 2019 at 09:33:28PM +0100, Clément Péron wrote:
> > From: Jernej Skrabec <jernej.skrabec@siol.net>
> >
> > H6 PWM block is basically the same as A20 PWM, except that it also has
> > bus clock and reset line which needs to be handled accordingly.
> >
> > Expand Allwinner PWM binding with H6 PWM specifics.
> >
> > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
> > Signed-off-by: Clément Péron <peron.clem@gmail.com>
> > ---
> > .../bindings/pwm/allwinner,sun4i-a10-pwm.yaml | 45 ++++++++++++++++++-
> > 1 file changed, 44 insertions(+), 1 deletion(-)
> >
> > diff --git a/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml
> > index 0ac52f83a58c..bf36ea509f31 100644
> > --- a/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml
> > +++ b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml
> > @@ -30,13 +30,46 @@ properties:
> > - items:
> > - const: allwinner,sun50i-h5-pwm
> > - const: allwinner,sun5i-a13-pwm
> > + - const: allwinner,sun50i-h6-pwm
> >
> > reg:
> > maxItems: 1
> >
> > - clocks:
> > + # Even though it only applies to subschemas under the conditionals,
> > + # not listing them here will trigger a warning because of the
> > + # additionalsProperties set to false.
> > + clocks: true
> > + clock-names: true
> > + resets:
> > maxItems: 1
> >
> > + if:
> > + properties:
> > + compatible:
> > + contains:
> > + const: allwinner,sun50i-h6-pwm
> > +
> > + then:
> > + properties:
> > + clocks:
> > + items:
> > + - description: Module Clock
> > + - description: Bus Clock
> > +
> > + clock-names:
> > + items:
> > + - const: mod
> > + - const: bus
> > +
> > + required:
> > + - clock-names
> > + - resets
> > +
> > + else:
> > + properties:
> > + clocks:
> > + maxItems: 1
> > +
>
> I guess this hunk says "If this is a allwinner,sun50i-h6-pwm, a mod and
> bus clock is required.", right?
>
> I wonder if it is sensible to require a clock-names property in the else
> branch, too. This would make it obvious if the clock there corresponds
> to the "mod" or the "bus" clock on H6. (I guess it's "mod".)

This can be done a bit differently and could address your concerns

Something like

properties:
...

clocks:
minItems: 1
maxItems: 2
items:
- description: Bus Clock
- description: Module Clock

required:
- clocks

if:
...

then:
properties:
clocks:
maxItems: 2

clocks-names:
items:
- const: mod
- const: bus

required:
- clock-names

else:
properties:
clocks:
maxItems: 1

That way, the definition of the order and which clock is which is
pretty obvious in both cases, and we don't get any weird warnings.

Maxime[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2019-11-05 12:12    [W:0.759 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site