lkml.org 
[lkml]   [2019]   [Nov]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [PATCH 02/10] iio: imu: adis16400: check ret val for non-zero vs less-than-zero
Date
On Sun, 2019-11-03 at 10:21 +0000, Jonathan Cameron wrote:
> On Fri, 1 Nov 2019 11:34:57 +0200
> Alexandru Ardelean <alexandru.ardelean@analog.com> wrote:
>
> > The ADIS library functions return zero on success, and negative values
> > for
> > error. Positive values aren't returned, but we only care about the
> > success
> > value (which is zero).
> >
> > This change is mostly needed so that the compiler won't make any
> > inferences
> > about some about values being potentially un-initialized. This only
> > triggers after making some functions inline, because the compiler can
> > better follow return paths.
> >
> > Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
> Applied,
>
> An observation whilst I was looking at the driver though...
>
> It has some cases of goto label; where the label doesn't then do anything
> in *_initial_setup. Direct returns would be a bit neater.
>
> Really minor point but if you happen to be touching that driver again
> soon nice to tidy up ;)

As you can probably guess, a lot of cleanups will be coming to the ADIS
family & library.
So, I'll try to include this into the next cleanup set.

I'll try to re-spin the ADIS lock cleanup.
We still need to do the devm_ variants + related cleanup.

Thanks
Alex

>
> Thanks,
>
> Jonathan
>
>
> > ---
> > drivers/iio/imu/adis16400.c | 22 +++++++++++-----------
> > 1 file changed, 11 insertions(+), 11 deletions(-)
> >
> > diff --git a/drivers/iio/imu/adis16400.c b/drivers/iio/imu/adis16400.c
> > index 0575ff706bd4..44e46dc96e00 100644
> > --- a/drivers/iio/imu/adis16400.c
> > +++ b/drivers/iio/imu/adis16400.c
> > @@ -217,16 +217,16 @@ static ssize_t
> > adis16400_show_serial_number(struct file *file,
> > int ret;
> >
> > ret = adis_read_reg_16(&st->adis, ADIS16334_LOT_ID1, &lot1);
> > - if (ret < 0)
> > + if (ret)
> > return ret;
> >
> > ret = adis_read_reg_16(&st->adis, ADIS16334_LOT_ID2, &lot2);
> > - if (ret < 0)
> > + if (ret)
> > return ret;
> >
> > ret = adis_read_reg_16(&st->adis, ADIS16334_SERIAL_NUMBER,
> > &serial_number);
> > - if (ret < 0)
> > + if (ret)
> > return ret;
> >
> > len = snprintf(buf, sizeof(buf), "%.4x-%.4x-%.4x\n", lot1, lot2,
> > @@ -249,7 +249,7 @@ static int adis16400_show_product_id(void *arg, u64
> > *val)
> > int ret;
> >
> > ret = adis_read_reg_16(&st->adis, ADIS16400_PRODUCT_ID, &prod_id);
> > - if (ret < 0)
> > + if (ret)
> > return ret;
> >
> > *val = prod_id;
> > @@ -266,7 +266,7 @@ static int adis16400_show_flash_count(void *arg,
> > u64 *val)
> > int ret;
> >
> > ret = adis_read_reg_16(&st->adis, ADIS16400_FLASH_CNT,
> > &flash_count);
> > - if (ret < 0)
> > + if (ret)
> > return ret;
> >
> > *val = flash_count;
> > @@ -327,7 +327,7 @@ static int adis16334_get_freq(struct
> > adis16400_state *st)
> > uint16_t t;
> >
> > ret = adis_read_reg_16(&st->adis, ADIS16400_SMPL_PRD, &t);
> > - if (ret < 0)
> > + if (ret)
> > return ret;
> >
> > t >>= ADIS16334_RATE_DIV_SHIFT;
> > @@ -359,7 +359,7 @@ static int adis16400_get_freq(struct
> > adis16400_state *st)
> > uint16_t t;
> >
> > ret = adis_read_reg_16(&st->adis, ADIS16400_SMPL_PRD, &t);
> > - if (ret < 0)
> > + if (ret)
> > return ret;
> >
> > sps = (t & ADIS16400_SMPL_PRD_TIME_BASE) ? 52851 : 1638404;
> > @@ -416,7 +416,7 @@ static int adis16400_set_filter(struct iio_dev
> > *indio_dev, int sps, int val)
> > }
> >
> > ret = adis_read_reg_16(&st->adis, ADIS16400_SENS_AVG, &val16);
> > - if (ret < 0)
> > + if (ret)
> > return ret;
> >
> > ret = adis_write_reg_16(&st->adis, ADIS16400_SENS_AVG,
> > @@ -615,7 +615,7 @@ static int adis16400_read_raw(struct iio_dev
> > *indio_dev,
> > ret = adis_read_reg_16(&st->adis,
> > ADIS16400_SENS_AVG,
> > &val16);
> > - if (ret < 0) {
> > + if (ret) {
> > mutex_unlock(&indio_dev->mlock);
> > return ret;
> > }
> > @@ -626,12 +626,12 @@ static int adis16400_read_raw(struct iio_dev
> > *indio_dev,
> > *val2 = (ret % 1000) * 1000;
> > }
> > mutex_unlock(&indio_dev->mlock);
> > - if (ret < 0)
> > + if (ret)
> > return ret;
> > return IIO_VAL_INT_PLUS_MICRO;
> > case IIO_CHAN_INFO_SAMP_FREQ:
> > ret = st->variant->get_freq(st);
> > - if (ret < 0)
> > + if (ret)
> > return ret;
> > *val = ret / 1000;
> > *val2 = (ret % 1000) * 1000;
\
 
 \ /
  Last update: 2019-11-04 08:42    [W:0.101 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site