Messages in this thread Patch in this message | | | From | Peng Fan <> | Subject | [PATCH] arm64: defconfig: Change CONFIG_AT803X_PHY from m to y | Date | Mon, 4 Nov 2019 06:19:30 +0000 |
| |
From: Peng Fan <peng.fan@nxp.com>
With phy-reset-gpios are enabled for i.MX8MM-EVK board, phy will be reset. Without CONFIG_AT803X_PHY as y, board will stop booting in NFS DHCP, because phy is not ready. So mark CONFIG_AT803X_PHY from m to y to make board boot when using nfs rootfs.
Signed-off-by: Peng Fan <peng.fan@nxp.com> --- arch/arm64/configs/defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index c9a867ac32d4..cd778c9ea8a4 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -285,7 +285,7 @@ CONFIG_SNI_AVE=y CONFIG_SNI_NETSEC=y CONFIG_STMMAC_ETH=m CONFIG_MDIO_BUS_MUX_MMIOREG=y -CONFIG_AT803X_PHY=m +CONFIG_AT803X_PHY=y CONFIG_MARVELL_PHY=m CONFIG_MARVELL_10G_PHY=m CONFIG_MESON_GXL_PHY=m -- 2.16.4
| |