lkml.org 
[lkml]   [2019]   [Nov]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] m68k: defconfig: Update defconfigs for v5.4-rc1
On Tue, Nov 05, 2019 at 01:14:04AM +0100, John Paul Adrian Glaubitz wrote:
> On 11/4/19 12:06 PM, Geert Uytterhoeven wrote:
> > Amiga is fine.
> >
> > Mac and Q40 are not, apparently.
>
> I have not been able to come by a Q40 or 68k-Mac with an
> IDE controller, unfortunately.
>
> If the Mac IDE controller is the same as on the PowerBook
> 3400c, I would be able to test a converted driver as I have
> that PowerBook.

I have a couple old macs with IDE. I have a PowerBook 190 and a
Performa (a 636? - it's buried away so I'm not 100% sure) both with
IDE drives. I'll try to find time to pull one of them out and see if
they still run. Can Linux run on a system with a 68LC040 these days?
I know there were issues with FPU emulation at various points. Both
of those would lack FPU due to using a 68LC040 chip.

The 3400c is PCI based and so probably isn't at all compatible. It
should be using the same driver as the other PCI models. There is
already a PATA_MACIO configuration option for that style. The 5300
is the one that's basically an upgraded 68k model (it's nearly
identical to the 190 internally).

Brad Boyer
flar@allandria.com

\
 
 \ /
  Last update: 2019-11-05 02:32    [W:1.628 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site