lkml.org 
[lkml]   [2019]   [Nov]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/3] dt-bindings: serial: Convert Samsung UART bindings to json-schema
On Tue, Oct 15, 2019 at 02:40:06PM -0500, Rob Herring wrote:
> On Fri, Oct 04, 2019 at 05:14:14PM +0200, Krzysztof Kozlowski wrote:
> > Convert Samsung S3C/S5P/Exynos Serial/UART bindings to DT schema format
> > using json-schema.
> >
> > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> > ---
> > .../bindings/mfd/samsung,exynos5433-lpass.txt | 2 +-
> > .../bindings/serial/samsung_uart.txt | 58 -------
> > .../bindings/serial/samsung_uart.yaml | 148 ++++++++++++++++++
> > 3 files changed, 149 insertions(+), 59 deletions(-)
> > delete mode 100644 Documentation/devicetree/bindings/serial/samsung_uart.txt
> > create mode 100644 Documentation/devicetree/bindings/serial/samsung_uart.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt
> > index d759da606f75..30ea27c3936d 100644
> > --- a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt
> > +++ b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt
> > @@ -18,7 +18,7 @@ an optional sub-node. For "samsung,exynos5433-lpass" compatible this includes:
> > UART, SLIMBUS, PCM, I2S, DMAC, Timers 0...4, VIC, WDT 0...1 devices.
> >
> > Bindings of the sub-nodes are described in:
> > - ../serial/samsung_uart.txt
> > + ../serial/samsung_uart.yaml
> > ../sound/samsung-i2s.txt
> > ../dma/arm-pl330.txt
> >
> > diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.txt b/Documentation/devicetree/bindings/serial/samsung_uart.txt
> > deleted file mode 100644
> > index e85f37ec33f0..000000000000
> > --- a/Documentation/devicetree/bindings/serial/samsung_uart.txt
> > +++ /dev/null
> > @@ -1,58 +0,0 @@
> > -* Samsung's UART Controller
> > -
> > -The Samsung's UART controller is used for interfacing SoC with serial
> > -communicaion devices.
> > -
> > -Required properties:
> > -- compatible: should be one of following:
> > - - "samsung,exynos4210-uart" - Exynos4210 SoC,
> > - - "samsung,s3c2410-uart" - compatible with ports present on S3C2410 SoC,
> > - - "samsung,s3c2412-uart" - compatible with ports present on S3C2412 SoC,
> > - - "samsung,s3c2440-uart" - compatible with ports present on S3C2440 SoC,
> > - - "samsung,s3c6400-uart" - compatible with ports present on S3C6400 SoC,
> > - - "samsung,s5pv210-uart" - compatible with ports present on S5PV210 SoC.
> > -
> > -- reg: base physical address of the controller and length of memory mapped
> > - region.
> > -
> > -- interrupts: a single interrupt signal to SoC interrupt controller,
> > - according to interrupt bindings documentation [1].
> > -
> > -- clock-names: input names of clocks used by the controller:
> > - - "uart" - controller bus clock,
> > - - "clk_uart_baudN" - Nth baud base clock input (N = 0, 1, ...),
> > - according to SoC User's Manual (only N = 0 is allowedfor SoCs without
> > - internal baud clock mux).
> > -- clocks: phandles and specifiers for all clocks specified in "clock-names"
> > - property, in the same order, according to clock bindings documentation [2].
> > -
> > -[1] Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
> > -[2] Documentation/devicetree/bindings/clock/clock-bindings.txt
> > -
> > -Optional properties:
> > -- samsung,uart-fifosize: The fifo size supported by the UART channel
> > -
> > -Note: Each Samsung UART should have an alias correctly numbered in the
> > -"aliases" node, according to serialN format, where N is the port number
> > -(non-negative decimal integer) as specified by User's Manual of respective
> > -SoC.
> > -
> > -Example:
> > - aliases {
> > - serial0 = &uart0;
> > - serial1 = &uart1;
> > - serial2 = &uart2;
> > - };
> > -
> > -Example:
> > - uart1: serial@7f005400 {
> > - compatible = "samsung,s3c6400-uart";
> > - reg = <0x7f005400 0x100>;
> > - interrupt-parent = <&vic1>;
> > - interrupts = <6>;
> > - clock-names = "uart", "clk_uart_baud2",
> > - "clk_uart_baud3";
> > - clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>,
> > - <&clocks SCLK_UART>;
> > - samsung,uart-fifosize = <16>;
> > - };
> > diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml
> > new file mode 100644
> > index 000000000000..276bea1c231a
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml
> > @@ -0,0 +1,148 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/serial/samsung_uart.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Samsung S3C, S5P and Exynos SoC UART Controller
> > +
> > +maintainers:
> > + - Krzysztof Kozlowski <krzk@kernel.org>
> > + - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > +
> > +description: |+
> > + Each Samsung UART should have an alias correctly numbered in the "aliases"
> > + node, according to serialN format, where N is the port number (non-negative
> > + decimal integer) as specified by User's Manual of respective SoC.
> > +
> > +properties:
> > + compatible:
> > + items:
> > + - enum:
> > + - samsung,s3c2410-uart
> > + - samsung,s3c2412-uart
> > + - samsung,s3c2440-uart
> > + - samsung,s3c6400-uart
> > + - samsung,s5pv210-uart
> > + - samsung,exynos4210-uart
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + clocks:
> > + minItems: 2
> > + maxItems: 5
> > +
> > + clock-names:
> > + description: |
> > + List of clock names:
> > + - "uart" - controller bus clock,
> > + - "clk_uart_baudN" - Nth baud base clock input (N = 0, 1, ...).
>
> Kind of redundant to list this here.
>
> > + N = 0 is allowed for SoCs without internal baud clock mux.
>
> You can add a description with the item:
>
> items:
> - pattern: '^clk_uart_baud[0-3]$'
> description: N = 0 is allowed for SoCs without internal baud clock mux.
>

This caused error:
properties:clock-names:items:1: Additional properties are not allowed ('description' was unexpected)
../Documentation/devicetree/bindings/Makefile:12: recipe for target 'Documentation/devicetree/bindings/serial/samsung_uart.example.dts' failed

I applied rest of comments. Thanks for review!

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2019-11-03 16:57    [W:0.050 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site