lkml.org 
[lkml]   [2019]   [Nov]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [RFC PATCH v3 10/15] regulator: bd71828: Add GPIO based run-level control for regulators
On Fri, Nov 1, 2019 at 12:43 PM Matti Vaittinen
<matti.vaittinen@fi.rohmeurope.com> wrote:

> Bucks 1,2,6 and 7 on ROHM BD71828 can be either controlled as
> individual regulartors - or they can be grouped to a group of
> regulators that are controlled by 'run levels'. This can be
> done via I2C. Each regulator can be assigned a voltage and
> enable/disable status for each run-level. These statuses are
> also changeable via I2C.
>
> Run-levels can then be changed either by I2C or GPIO. This
> control mechanism is selected by data in one time programmable
> area (during production) and can't be changed later.
>
> Allow regulators to be controlled via run-levels and allow
> getting/setting the current run-level also via GPIO.
>
> Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>

I like the way you use the gpio API so FWIW:
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

I do not understand the regulator parts of the patch.

Yours,
Linus Walleij

\
 
 \ /
  Last update: 2019-11-03 23:30    [W:0.188 / U:0.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site