lkml.org 
[lkml]   [2019]   [Nov]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRCU stall on 4.9.191/CONFIG_PREEMPT, single CPU
Hi Everyone,

I'm experiencing what appears to be a complete system freeze on a single
CPU embedded system (PowerPC, MPC8378) running Linux 4.9.191 with
CONFIG_PREEMPT enabled.

Enabling all lockup detection in the kernel config revealed RCU stalls,
detected by rcu_preempt (sample included below). These occur every 30
seconds, give or take.

At that point the network stack is hosed (no replies to ARP requests).
Softirqs seem to be hosed as well - I added a test module that logs a
message every 0.5 seconds from a timer callback and, once the "freeze"
occurs, these messages are never printed.

I simply do not understand the RCU and scheduler implementation well
enough to figure this out on my own, so any idea or suggestion would be
helpful.

Looking at Documentation/RCU/stallwarn.txt, I found this among the
potential causes for an RCU stall:

A CPU-bound real-time task in a CONFIG_PREEMPT kernel, which might
happen to preempt a low-priority task in the middle of an RCU
read-side critical section. This is especially damaging if
that low-priority task is not permitted to run on any other CPU,
in which case the next RCU grace period can never complete

In my case all tasks are CPU-bound, simply because there is only one
CPU. And yes, I do have realtime tasks (many of them), so any of them
can potentially preempt a low-priority task in the middle of an RCU read
critical section. Does that mean it's a bad idea to run a fully
preemptible kernel on a single CPU? If that were the case, I would
expect to see this kind of problems much sooner/more often, but they are
only triggered by a very specific activity of the application that runs
on top.

Thanks,
Radu Rendec

[ 902.232175] INFO: rcu_preempt detected stalls on CPUs/tasks:
[ 902.237847] (detected by 0, t=21002 jiffies, g=8316, c=8315, q=210)
[ 902.244203] All QSes seen, last rcu_preempt kthread activity 21002
(602030-581028), jiffies_till_next_fqs=3, root ->qsmask 0x0
[ 902.255586] backupRestore R running task 0 1525 1254 0x00000000
[ 902.262633] Call Trace:
[ 902.265093] [9ac0fc60] [8005b2f4] rcu_check_callbacks+0x848/0x860
(unreliable)
[ 902.272319] [9ac0fcd0] [8005e878] update_process_times+0x30/0x60
[ 902.278328] [9ac0fce0] [8007046c] tick_sched_timer+0x58/0xb4
[ 902.283985] [9ac0fd10] [8005f844]
__hrtimer_run_queues.constprop.34+0x100/0x18c
[ 902.291291] [9ac0fd50] [8005fae0] hrtimer_interrupt+0xc0/0x290
[ 902.297122] [9ac0fda0] [8000a3c8] __timer_interrupt+0x15c/0x20c
[ 902.303038] [9ac0fdb0] [8000a610] timer_interrupt+0x9c/0xc8
[ 902.308614] [9ac0fdd0] [8000f678] ret_from_except+0x0/0x14
[ 902.314106] --- interrupt: 901 at timespec64_add_safe+0x108/0x12c
[ 902.314106] LR = poll_select_set_timeout+0x94/0x110
[ 902.325404] [9ac0fe90] [111294e8] 0x111294e8 (unreliable)
[ 902.330804] [9ac0feb0] [800e8a1c] poll_select_set_timeout+0x50/0x110
[ 902.337155] [9ac0ff10] [800e9d70] SyS_poll+0x68/0x114
[ 902.342205] [9ac0ff40] [8000ef6c] ret_from_syscall+0x0/0x38
[ 902.347773] --- interrupt: c01 at 0xe5855f8
[ 902.347773] LR = 0xe5855e0
[ 902.354994] rcu_preempt kthread starved for 21002 jiffies! g8316
c8315 f0x2 RCU_GP_WAIT_FQS(3) ->state=0x0
[ 902.364638] rcu_preempt R running task 0 7 2 0x00000800
[ 902.371686] Call Trace:
[ 902.374126] [9f043d00] [9ac08080] 0x9ac08080 (unreliable)
[ 902.379526] [9f043dc0] [80415ca4] __schedule+0x278/0x490
[ 902.384835] [9f043e10] [8041608c] schedule+0x3c/0xac
[ 902.389799] [9f043e20] [80418e9c] schedule_timeout+0x128/0x240
[ 902.395630] [9f043e60] [8005a0d4] rcu_gp_kthread+0x3dc/0xa6c
[ 902.401289] [9f043ef0] [80038b7c] kthread+0xbc/0xd0
[ 902.406164] [9f043f40] [8000f094] ret_from_kernel_thread+0x5c/0x64

\
 
 \ /
  Last update: 2019-11-29 23:52    [W:1.127 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site