lkml.org 
[lkml]   [2019]   [Nov]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 09/10] staging: clocking-wizard: Delete the driver from the staging
Date
From: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>

Delete the driver from the staging as it is in drivers/clk.

Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
---
drivers/staging/Kconfig | 2 -
drivers/staging/Makefile | 1 -
drivers/staging/clocking-wizard/Kconfig | 10 -
drivers/staging/clocking-wizard/Makefile | 2 -
drivers/staging/clocking-wizard/TODO | 12 -
.../clocking-wizard/clk-xlnx-clock-wizard.c | 335 ---------------------
drivers/staging/clocking-wizard/dt-binding.txt | 30 --
7 files changed, 392 deletions(-)
delete mode 100644 drivers/staging/clocking-wizard/Kconfig
delete mode 100644 drivers/staging/clocking-wizard/Makefile
delete mode 100644 drivers/staging/clocking-wizard/TODO
delete mode 100644 drivers/staging/clocking-wizard/clk-xlnx-clock-wizard.c
delete mode 100644 drivers/staging/clocking-wizard/dt-binding.txt

diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 6f1fa4c..29e7ab7 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -78,8 +78,6 @@ source "drivers/staging/gs_fpgaboot/Kconfig"

source "drivers/staging/unisys/Kconfig"

-source "drivers/staging/clocking-wizard/Kconfig"
-
source "drivers/staging/fbtft/Kconfig"

source "drivers/staging/fsl-dpaa2/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index a90f9b3..7de50e3 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -29,7 +29,6 @@ obj-$(CONFIG_FIREWIRE_SERIAL) += fwserial/
obj-$(CONFIG_GOLDFISH) += goldfish/
obj-$(CONFIG_GS_FPGABOOT) += gs_fpgaboot/
obj-$(CONFIG_UNISYSSPAR) += unisys/
-obj-$(CONFIG_COMMON_CLK_XLNX_CLKWZRD) += clocking-wizard/
obj-$(CONFIG_FB_TFT) += fbtft/
obj-$(CONFIG_FSL_DPAA2) += fsl-dpaa2/
obj-$(CONFIG_WILC1000) += wilc1000/
diff --git a/drivers/staging/clocking-wizard/Kconfig b/drivers/staging/clocking-wizard/Kconfig
deleted file mode 100644
index 04be22d..0000000
--- a/drivers/staging/clocking-wizard/Kconfig
+++ /dev/null
@@ -1,10 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Xilinx Clocking Wizard Driver
-#
-
-config COMMON_CLK_XLNX_CLKWZRD
- tristate "Xilinx Clocking Wizard"
- depends on COMMON_CLK && OF
- help
- Support for the Xilinx Clocking Wizard IP core clock generator.
diff --git a/drivers/staging/clocking-wizard/Makefile b/drivers/staging/clocking-wizard/Makefile
deleted file mode 100644
index b1f9152..0000000
--- a/drivers/staging/clocking-wizard/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_COMMON_CLK_XLNX_CLKWZRD) += clk-xlnx-clock-wizard.o
diff --git a/drivers/staging/clocking-wizard/TODO b/drivers/staging/clocking-wizard/TODO
deleted file mode 100644
index ebe99db..0000000
--- a/drivers/staging/clocking-wizard/TODO
+++ /dev/null
@@ -1,12 +0,0 @@
-TODO:
- - support for fractional multiplier
- - support for fractional divider (output 0 only)
- - support for set_rate() operations (may benefit from Stephen Boyd's
- refactoring of the clk primitives: https://lkml.org/lkml/2014/9/5/766)
- - review arithmetic
- - overflow after multiplication?
- - maximize accuracy before divisions
-
-Patches to:
- Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Sören Brinkmann <soren.brinkmann@xilinx.com>
diff --git a/drivers/staging/clocking-wizard/clk-xlnx-clock-wizard.c b/drivers/staging/clocking-wizard/clk-xlnx-clock-wizard.c
deleted file mode 100644
index 15b7a82..0000000
--- a/drivers/staging/clocking-wizard/clk-xlnx-clock-wizard.c
+++ /dev/null
@@ -1,335 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Xilinx 'Clocking Wizard' driver
- *
- * Copyright (C) 2013 - 2014 Xilinx
- *
- * Sören Brinkmann <soren.brinkmann@xilinx.com>
- */
-
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/clk-provider.h>
-#include <linux/slab.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/module.h>
-#include <linux/err.h>
-
-#define WZRD_NUM_OUTPUTS 7
-#define WZRD_ACLK_MAX_FREQ 250000000UL
-
-#define WZRD_CLK_CFG_REG(n) (0x200 + 4 * (n))
-
-#define WZRD_CLKOUT0_FRAC_EN BIT(18)
-#define WZRD_CLKFBOUT_FRAC_EN BIT(26)
-
-#define WZRD_CLKFBOUT_MULT_SHIFT 8
-#define WZRD_CLKFBOUT_MULT_MASK (0xff << WZRD_CLKFBOUT_MULT_SHIFT)
-#define WZRD_DIVCLK_DIVIDE_SHIFT 0
-#define WZRD_DIVCLK_DIVIDE_MASK (0xff << WZRD_DIVCLK_DIVIDE_SHIFT)
-#define WZRD_CLKOUT_DIVIDE_SHIFT 0
-#define WZRD_CLKOUT_DIVIDE_MASK (0xff << WZRD_DIVCLK_DIVIDE_SHIFT)
-
-enum clk_wzrd_int_clks {
- wzrd_clk_mul,
- wzrd_clk_mul_div,
- wzrd_clk_int_max
-};
-
-/**
- * struct clk_wzrd:
- * @clk_data: Clock data
- * @nb: Notifier block
- * @base: Memory base
- * @clk_in1: Handle to input clock 'clk_in1'
- * @axi_clk: Handle to input clock 's_axi_aclk'
- * @clks_internal: Internal clocks
- * @clkout: Output clocks
- * @speed_grade: Speed grade of the device
- * @suspended: Flag indicating power state of the device
- */
-struct clk_wzrd {
- struct clk_onecell_data clk_data;
- struct notifier_block nb;
- void __iomem *base;
- struct clk *clk_in1;
- struct clk *axi_clk;
- struct clk *clks_internal[wzrd_clk_int_max];
- struct clk *clkout[WZRD_NUM_OUTPUTS];
- unsigned int speed_grade;
- bool suspended;
-};
-
-#define to_clk_wzrd(_nb) container_of(_nb, struct clk_wzrd, nb)
-
-/* maximum frequencies for input/output clocks per speed grade */
-static const unsigned long clk_wzrd_max_freq[] = {
- 800000000UL,
- 933000000UL,
- 1066000000UL
-};
-
-static int clk_wzrd_clk_notifier(struct notifier_block *nb, unsigned long event,
- void *data)
-{
- unsigned long max;
- struct clk_notifier_data *ndata = data;
- struct clk_wzrd *clk_wzrd = to_clk_wzrd(nb);
-
- if (clk_wzrd->suspended)
- return NOTIFY_OK;
-
- if (ndata->clk == clk_wzrd->clk_in1)
- max = clk_wzrd_max_freq[clk_wzrd->speed_grade - 1];
- else if (ndata->clk == clk_wzrd->axi_clk)
- max = WZRD_ACLK_MAX_FREQ;
- else
- return NOTIFY_DONE; /* should never happen */
-
- switch (event) {
- case PRE_RATE_CHANGE:
- if (ndata->new_rate > max)
- return NOTIFY_BAD;
- return NOTIFY_OK;
- case POST_RATE_CHANGE:
- case ABORT_RATE_CHANGE:
- default:
- return NOTIFY_DONE;
- }
-}
-
-static int __maybe_unused clk_wzrd_suspend(struct device *dev)
-{
- struct clk_wzrd *clk_wzrd = dev_get_drvdata(dev);
-
- clk_disable_unprepare(clk_wzrd->axi_clk);
- clk_wzrd->suspended = true;
-
- return 0;
-}
-
-static int __maybe_unused clk_wzrd_resume(struct device *dev)
-{
- int ret;
- struct clk_wzrd *clk_wzrd = dev_get_drvdata(dev);
-
- ret = clk_prepare_enable(clk_wzrd->axi_clk);
- if (ret) {
- dev_err(dev, "unable to enable s_axi_aclk\n");
- return ret;
- }
-
- clk_wzrd->suspended = false;
-
- return 0;
-}
-
-static SIMPLE_DEV_PM_OPS(clk_wzrd_dev_pm_ops, clk_wzrd_suspend,
- clk_wzrd_resume);
-
-static int clk_wzrd_probe(struct platform_device *pdev)
-{
- int i, ret;
- u32 reg;
- unsigned long rate;
- const char *clk_name;
- struct clk_wzrd *clk_wzrd;
- struct resource *mem;
- struct device_node *np = pdev->dev.of_node;
-
- clk_wzrd = devm_kzalloc(&pdev->dev, sizeof(*clk_wzrd), GFP_KERNEL);
- if (!clk_wzrd)
- return -ENOMEM;
- platform_set_drvdata(pdev, clk_wzrd);
-
- mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- clk_wzrd->base = devm_ioremap_resource(&pdev->dev, mem);
- if (IS_ERR(clk_wzrd->base))
- return PTR_ERR(clk_wzrd->base);
-
- ret = of_property_read_u32(np, "speed-grade", &clk_wzrd->speed_grade);
- if (!ret) {
- if (clk_wzrd->speed_grade < 1 || clk_wzrd->speed_grade > 3) {
- dev_warn(&pdev->dev, "invalid speed grade '%d'\n",
- clk_wzrd->speed_grade);
- clk_wzrd->speed_grade = 0;
- }
- }
-
- clk_wzrd->clk_in1 = devm_clk_get(&pdev->dev, "clk_in1");
- if (IS_ERR(clk_wzrd->clk_in1)) {
- if (clk_wzrd->clk_in1 != ERR_PTR(-EPROBE_DEFER))
- dev_err(&pdev->dev, "clk_in1 not found\n");
- return PTR_ERR(clk_wzrd->clk_in1);
- }
-
- clk_wzrd->axi_clk = devm_clk_get(&pdev->dev, "s_axi_aclk");
- if (IS_ERR(clk_wzrd->axi_clk)) {
- if (clk_wzrd->axi_clk != ERR_PTR(-EPROBE_DEFER))
- dev_err(&pdev->dev, "s_axi_aclk not found\n");
- return PTR_ERR(clk_wzrd->axi_clk);
- }
- ret = clk_prepare_enable(clk_wzrd->axi_clk);
- if (ret) {
- dev_err(&pdev->dev, "enabling s_axi_aclk failed\n");
- return ret;
- }
- rate = clk_get_rate(clk_wzrd->axi_clk);
- if (rate > WZRD_ACLK_MAX_FREQ) {
- dev_err(&pdev->dev, "s_axi_aclk frequency (%lu) too high\n",
- rate);
- ret = -EINVAL;
- goto err_disable_clk;
- }
-
- /* we don't support fractional div/mul yet */
- reg = readl(clk_wzrd->base + WZRD_CLK_CFG_REG(0)) &
- WZRD_CLKFBOUT_FRAC_EN;
- reg |= readl(clk_wzrd->base + WZRD_CLK_CFG_REG(2)) &
- WZRD_CLKOUT0_FRAC_EN;
- if (reg)
- dev_warn(&pdev->dev, "fractional div/mul not supported\n");
-
- /* register multiplier */
- reg = (readl(clk_wzrd->base + WZRD_CLK_CFG_REG(0)) &
- WZRD_CLKFBOUT_MULT_MASK) >> WZRD_CLKFBOUT_MULT_SHIFT;
- clk_name = kasprintf(GFP_KERNEL, "%s_mul", dev_name(&pdev->dev));
- if (!clk_name) {
- ret = -ENOMEM;
- goto err_disable_clk;
- }
- clk_wzrd->clks_internal[wzrd_clk_mul] = clk_register_fixed_factor
- (&pdev->dev, clk_name,
- __clk_get_name(clk_wzrd->clk_in1),
- 0, reg, 1);
- kfree(clk_name);
- if (IS_ERR(clk_wzrd->clks_internal[wzrd_clk_mul])) {
- dev_err(&pdev->dev, "unable to register fixed-factor clock\n");
- ret = PTR_ERR(clk_wzrd->clks_internal[wzrd_clk_mul]);
- goto err_disable_clk;
- }
-
- /* register div */
- reg = (readl(clk_wzrd->base + WZRD_CLK_CFG_REG(0)) &
- WZRD_DIVCLK_DIVIDE_MASK) >> WZRD_DIVCLK_DIVIDE_SHIFT;
- clk_name = kasprintf(GFP_KERNEL, "%s_mul_div", dev_name(&pdev->dev));
- if (!clk_name) {
- ret = -ENOMEM;
- goto err_rm_int_clk;
- }
-
- clk_wzrd->clks_internal[wzrd_clk_mul_div] = clk_register_fixed_factor
- (&pdev->dev, clk_name,
- __clk_get_name(clk_wzrd->clks_internal[wzrd_clk_mul]),
- 0, 1, reg);
- if (IS_ERR(clk_wzrd->clks_internal[wzrd_clk_mul_div])) {
- dev_err(&pdev->dev, "unable to register divider clock\n");
- ret = PTR_ERR(clk_wzrd->clks_internal[wzrd_clk_mul_div]);
- goto err_rm_int_clk;
- }
-
- /* register div per output */
- for (i = WZRD_NUM_OUTPUTS - 1; i >= 0 ; i--) {
- const char *clkout_name;
-
- if (of_property_read_string_index(np, "clock-output-names", i,
- &clkout_name)) {
- dev_err(&pdev->dev,
- "clock output name not specified\n");
- ret = -EINVAL;
- goto err_rm_int_clks;
- }
- reg = readl(clk_wzrd->base + WZRD_CLK_CFG_REG(2) + i * 12);
- reg &= WZRD_CLKOUT_DIVIDE_MASK;
- reg >>= WZRD_CLKOUT_DIVIDE_SHIFT;
- clk_wzrd->clkout[i] = clk_register_fixed_factor
- (&pdev->dev, clkout_name, clk_name, 0, 1, reg);
- if (IS_ERR(clk_wzrd->clkout[i])) {
- int j;
-
- for (j = i + 1; j < WZRD_NUM_OUTPUTS; j++)
- clk_unregister(clk_wzrd->clkout[j]);
- dev_err(&pdev->dev,
- "unable to register divider clock\n");
- ret = PTR_ERR(clk_wzrd->clkout[i]);
- goto err_rm_int_clks;
- }
- }
-
- kfree(clk_name);
-
- clk_wzrd->clk_data.clks = clk_wzrd->clkout;
- clk_wzrd->clk_data.clk_num = ARRAY_SIZE(clk_wzrd->clkout);
- of_clk_add_provider(np, of_clk_src_onecell_get, &clk_wzrd->clk_data);
-
- if (clk_wzrd->speed_grade) {
- clk_wzrd->nb.notifier_call = clk_wzrd_clk_notifier;
-
- ret = clk_notifier_register(clk_wzrd->clk_in1,
- &clk_wzrd->nb);
- if (ret)
- dev_warn(&pdev->dev,
- "unable to register clock notifier\n");
-
- ret = clk_notifier_register(clk_wzrd->axi_clk, &clk_wzrd->nb);
- if (ret)
- dev_warn(&pdev->dev,
- "unable to register clock notifier\n");
- }
-
- return 0;
-
-err_rm_int_clks:
- clk_unregister(clk_wzrd->clks_internal[1]);
-err_rm_int_clk:
- kfree(clk_name);
- clk_unregister(clk_wzrd->clks_internal[0]);
-err_disable_clk:
- clk_disable_unprepare(clk_wzrd->axi_clk);
-
- return ret;
-}
-
-static int clk_wzrd_remove(struct platform_device *pdev)
-{
- int i;
- struct clk_wzrd *clk_wzrd = platform_get_drvdata(pdev);
-
- of_clk_del_provider(pdev->dev.of_node);
-
- for (i = 0; i < WZRD_NUM_OUTPUTS; i++)
- clk_unregister(clk_wzrd->clkout[i]);
- for (i = 0; i < wzrd_clk_int_max; i++)
- clk_unregister(clk_wzrd->clks_internal[i]);
-
- if (clk_wzrd->speed_grade) {
- clk_notifier_unregister(clk_wzrd->axi_clk, &clk_wzrd->nb);
- clk_notifier_unregister(clk_wzrd->clk_in1, &clk_wzrd->nb);
- }
-
- clk_disable_unprepare(clk_wzrd->axi_clk);
-
- return 0;
-}
-
-static const struct of_device_id clk_wzrd_ids[] = {
- { .compatible = "xlnx,clocking-wizard" },
- { },
-};
-MODULE_DEVICE_TABLE(of, clk_wzrd_ids);
-
-static struct platform_driver clk_wzrd_driver = {
- .driver = {
- .name = "clk-wizard",
- .of_match_table = clk_wzrd_ids,
- .pm = &clk_wzrd_dev_pm_ops,
- },
- .probe = clk_wzrd_probe,
- .remove = clk_wzrd_remove,
-};
-module_platform_driver(clk_wzrd_driver);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Soeren Brinkmann <soren.brinkmann@xilinx.com");
-MODULE_DESCRIPTION("Driver for the Xilinx Clocking Wizard IP core");
diff --git a/drivers/staging/clocking-wizard/dt-binding.txt b/drivers/staging/clocking-wizard/dt-binding.txt
deleted file mode 100644
index 723271e..0000000
--- a/drivers/staging/clocking-wizard/dt-binding.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Binding for Xilinx Clocking Wizard IP Core
-
-This binding uses the common clock binding[1]. Details about the devices can be
-found in the product guide[2].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Clocking Wizard Product Guide
-http://www.xilinx.com/support/documentation/ip_documentation/clk_wiz/v5_1/pg065-clk-wiz.pdf
-
-Required properties:
- - compatible: Must be 'xlnx,clocking-wizard'
- - reg: Base and size of the cores register space
- - clocks: Handle to input clock
- - clock-names: Tuple containing 'clk_in1' and 's_axi_aclk'
- - clock-output-names: Names for the output clocks
-
-Optional properties:
- - speed-grade: Speed grade of the device (valid values are 1..3)
-
-Example:
- clock-generator@40040000 {
- reg = <0x40040000 0x1000>;
- compatible = "xlnx,clocking-wizard";
- speed-grade = <1>;
- clock-names = "clk_in1", "s_axi_aclk";
- clocks = <&clkc 15>, <&clkc 15>;
- clock-output-names = "clk_out0", "clk_out1", "clk_out2",
- "clk_out3", "clk_out4", "clk_out5",
- "clk_out6", "clk_out7";
- };
--
2.1.1
\
 
 \ /
  Last update: 2019-11-28 07:38    [W:0.281 / U:0.320 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site