lkml.org 
[lkml]   [2019]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.14 001/211] net/mlx4_en: fix mlx4 ethtool -N insertion
Date
From: Luigi Rizzo <lrizzo@google.com>

[ Upstream commit 34e59836565e36fade1464e054a3551c1a0364be ]

ethtool expects ETHTOOL_GRXCLSRLALL to set ethtool_rxnfc->data with the
total number of entries in the rx classifier table. Surprisingly, mlx4
is missing this part (in principle ethtool could still move forward and
try the insert).

Tested: compiled and run command:
phh13:~# ethtool -N eth1 flow-type udp4 queue 4
Added rule with ID 255

Signed-off-by: Luigi Rizzo <lrizzo@google.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/mellanox/mlx4/en_ethtool.c | 1 +
1 file changed, 1 insertion(+)

--- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
@@ -1722,6 +1722,7 @@ static int mlx4_en_get_rxnfc(struct net_
err = mlx4_en_get_flow(dev, cmd, cmd->fs.location);
break;
case ETHTOOL_GRXCLSRLALL:
+ cmd->data = MAX_NUM_OF_FS_RULES;
while ((!err || err == -ENOENT) && priority < cmd->rule_cnt) {
err = mlx4_en_get_flow(dev, cmd, i);
if (!err)

\
 
 \ /
  Last update: 2019-11-27 21:47    [W:0.545 / U:2.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site