[lkml]   [2019]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v2 0/5] DA9062 PMIC features

this series address all comments made on [1]. Patch "regulator: da9062:
fix suspend_enable/disable preparation" was applied mainline so I
droppped it. Patch "gpio: add support to get local gpio number" is new
and based on Linus suggestion. The v2 has no compile dependency like
[1] but you need to apply [2] else the features can't be used.


Marco Felsch (5):
gpio: add support to get local gpio number
dt-bindings: mfd: da9062: add regulator voltage selection
regulator: da9062: add voltage selection gpio support
dt-bindings: mfd: da9062: add regulator gpio enable/disable
regulator: da9062: add gpio based regulator dis-/enable support

.../devicetree/bindings/mfd/da9062.txt | 17 ++
drivers/gpio/gpiolib.c | 6 +
drivers/regulator/da9062-regulator.c | 244 ++++++++++++++++++
include/linux/gpio/consumer.h | 10 +
4 files changed, 277 insertions(+)


 \ /
  Last update: 2019-11-27 15:00    [W:0.081 / U:1.716 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site