lkml.org 
[lkml]   [2019]   [Nov]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 1/3] PCI: pciehp: Add support for disabling in-band presence
On Tue, Nov 26, 2019 at 7:36 PM Bjorn Helgaas <helgaas@kernel.org> wrote:
>
> On Fri, Oct 25, 2019 at 03:00:45PM -0400, Stuart Hayes wrote:
> > From: Alexandru Gagniuc <mr.nuke.me@gmail.com>
> >
> > The presence detect state (PDS) is normally a logical or of in-band and
> > out-of-band presence. As of PCIe 4.0, there is the option to disable
> > in-band presence so that the PDS bit always reflects the state of the
> > out-of-band presence.
> >
> > The recommendation of the PCIe spec is to disable in-band presence
> > whenever supported.
>
> I think I'm fine with this patch, but I would like to include the
> specific reference for this recommendation. If you have it handy, I
> can just insert it.
>

The PCI Express Base Specification Revision 5.0, Version 1.0, in the
implementation note under Appendix I ("Async Hot-Plug Reference
Model"), it says "If OOB PD is being used and the associated DSP
supports In-Band PD Disable, it is recommended that the In-Band PD
Disable bit be Set, ..."


> > Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
> > ---
> > drivers/pci/hotplug/pciehp.h | 1 +
> > drivers/pci/hotplug/pciehp_hpc.c | 9 ++++++++-
> > include/uapi/linux/pci_regs.h | 2 ++
> > 3 files changed, 11 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h
> > index 654c972b8ea0..27e4cd6529b0 100644
> > --- a/drivers/pci/hotplug/pciehp.h
> > +++ b/drivers/pci/hotplug/pciehp.h
> > @@ -83,6 +83,7 @@ struct controller {
> > struct pcie_device *pcie;
> >
> > u32 slot_cap; /* capabilities and quirks */
> > + unsigned int inband_presence_disabled:1;
> >
> > u16 slot_ctrl; /* control register access */
> > struct mutex ctrl_lock;
> > diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
> > index 1a522c1c4177..dc109d521f30 100644
> > --- a/drivers/pci/hotplug/pciehp_hpc.c
> > +++ b/drivers/pci/hotplug/pciehp_hpc.c
> > @@ -811,7 +811,7 @@ static inline void dbg_ctrl(struct controller *ctrl)
> > struct controller *pcie_init(struct pcie_device *dev)
> > {
> > struct controller *ctrl;
> > - u32 slot_cap, link_cap;
> > + u32 slot_cap, slot_cap2, link_cap;
> > u8 poweron;
> > struct pci_dev *pdev = dev->port;
> > struct pci_bus *subordinate = pdev->subordinate;
> > @@ -869,6 +869,13 @@ struct controller *pcie_init(struct pcie_device *dev)
> > FLAG(link_cap, PCI_EXP_LNKCAP_DLLLARC),
> > pdev->broken_cmd_compl ? " (with Cmd Compl erratum)" : "");
> >
> > + pcie_capability_read_dword(pdev, PCI_EXP_SLTCAP2, &slot_cap2);
> > + if (slot_cap2 & PCI_EXP_SLTCAP2_IBPD) {
> > + pcie_write_cmd_nowait(ctrl, PCI_EXP_SLTCTL_IBPD_DISABLE,
> > + PCI_EXP_SLTCTL_IBPD_DISABLE);
> > + ctrl->inband_presence_disabled = 1;
> > + }
> > +
> > /*
> > * If empty slot's power status is on, turn power off. The IRQ isn't
> > * requested yet, so avoid triggering a notification with this command.
> > diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
> > index 29d6e93fd15e..ea1cf9546e4d 100644
> > --- a/include/uapi/linux/pci_regs.h
> > +++ b/include/uapi/linux/pci_regs.h
> > @@ -604,6 +604,7 @@
> > #define PCI_EXP_SLTCTL_PWR_OFF 0x0400 /* Power Off */
> > #define PCI_EXP_SLTCTL_EIC 0x0800 /* Electromechanical Interlock Control */
> > #define PCI_EXP_SLTCTL_DLLSCE 0x1000 /* Data Link Layer State Changed Enable */
> > +#define PCI_EXP_SLTCTL_IBPD_DISABLE 0x4000 /* In-band PD disable */
> > #define PCI_EXP_SLTSTA 26 /* Slot Status */
> > #define PCI_EXP_SLTSTA_ABP 0x0001 /* Attention Button Pressed */
> > #define PCI_EXP_SLTSTA_PFD 0x0002 /* Power Fault Detected */
> > @@ -676,6 +677,7 @@
> > #define PCI_EXP_LNKSTA2 50 /* Link Status 2 */
> > #define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 52 /* v2 endpoints with link end here */
> > #define PCI_EXP_SLTCAP2 52 /* Slot Capabilities 2 */
> > +#define PCI_EXP_SLTCAP2_IBPD 0x0001 /* In-band PD Disable Supported */
> > #define PCI_EXP_SLTCTL2 56 /* Slot Control 2 */
> > #define PCI_EXP_SLTSTA2 58 /* Slot Status 2 */
> >
> > --
> > 2.18.1
> >

\
 
 \ /
  Last update: 2019-11-27 03:19    [W:0.089 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site