lkml.org 
[lkml]   [2019]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] DTS: bindings: wl1251: mark ti,power-gpio as optional
Date
It is now only useful for SPI interface.
Power control of SDIO mode is done through mmc core.

Suggested by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
---
Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
index f38950560982..88fd28d15eac 100644
--- a/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
+++ b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
@@ -9,11 +9,12 @@ Required properties:
- spi-max-frequency : Maximum SPI clocking speed of device in Hz
- interrupts : Should contain interrupt line
- vio-supply : phandle to regulator providing VIO
-- ti,power-gpio : GPIO connected to chip's PMEN pin

Optional properties:
- ti,wl1251-has-eeprom : boolean, the wl1251 has an eeprom connected, which
provides configuration data (calibration, MAC, ...)
+- ti,power-gpio : GPIO connected to chip's PMEN pin if operated in
+ SPI mode
- Please consult Documentation/devicetree/bindings/spi/spi-bus.txt
for optional SPI connection related properties,

--
2.23.0
\
 
 \ /
  Last update: 2019-11-24 11:37    [W:0.102 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site