lkml.org 
[lkml]   [2019]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] dmaengine: ti: edma: add missed operations
Date
The driver forgets to call pm_runtime_disable and pm_runtime_put_sync in
probe failure and remove.
Add the calls and modify probe failure handling to fix it.

To simplify the fix, the patch adjusts the calling order and merges checks
for devm_kcalloc.

Fixes: 2b6b3b742019 ("ARM/dmaengine: edma: Merge the two drivers under drivers/dma/")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
---
Changes in v2:
- Add the missed pm_runtime_put_sync.
- Simplify the patch.
- Rebase to dma-next.

drivers/dma/ti/edma.c | 37 ++++++++++++++++++++-----------------
1 file changed, 20 insertions(+), 17 deletions(-)

diff --git a/drivers/dma/ti/edma.c b/drivers/dma/ti/edma.c
index 756a3c951dc7..0628ee4bf1b4 100644
--- a/drivers/dma/ti/edma.c
+++ b/drivers/dma/ti/edma.c
@@ -2289,13 +2289,6 @@ static int edma_probe(struct platform_device *pdev)
if (!info)
return -ENODEV;

- pm_runtime_enable(dev);
- ret = pm_runtime_get_sync(dev);
- if (ret < 0) {
- dev_err(dev, "pm_runtime_get_sync() failed\n");
- return ret;
- }
-
ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
if (ret)
return ret;
@@ -2326,27 +2319,31 @@ static int edma_probe(struct platform_device *pdev)

platform_set_drvdata(pdev, ecc);

+ pm_runtime_enable(dev);
+ ret = pm_runtime_get_sync(dev);
+ if (ret < 0) {
+ dev_err(dev, "pm_runtime_get_sync() failed\n");
+ pm_runtime_disable(dev);
+ return ret;
+ }
+
/* Get eDMA3 configuration from IP */
ret = edma_setup_from_hw(dev, info, ecc);
if (ret)
- return ret;
+ goto err_disable_pm;

/* Allocate memory based on the information we got from the IP */
ecc->slave_chans = devm_kcalloc(dev, ecc->num_channels,
sizeof(*ecc->slave_chans), GFP_KERNEL);
- if (!ecc->slave_chans)
- return -ENOMEM;

ecc->slot_inuse = devm_kcalloc(dev, BITS_TO_LONGS(ecc->num_slots),
sizeof(unsigned long), GFP_KERNEL);
- if (!ecc->slot_inuse)
- return -ENOMEM;

ecc->channels_mask = devm_kcalloc(dev,
BITS_TO_LONGS(ecc->num_channels),
sizeof(unsigned long), GFP_KERNEL);
- if (!ecc->channels_mask)
- return -ENOMEM;
+ if (!ecc->slave_chans || !ecc->slot_inuse || !ecc->channels_mask)
+ goto err_disable_pm;

/* Mark all channels available initially */
bitmap_fill(ecc->channels_mask, ecc->num_channels);
@@ -2388,7 +2385,7 @@ static int edma_probe(struct platform_device *pdev)
ecc);
if (ret) {
dev_err(dev, "CCINT (%d) failed --> %d\n", irq, ret);
- return ret;
+ goto err_disable_pm;
}
ecc->ccint = irq;
}
@@ -2404,7 +2401,7 @@ static int edma_probe(struct platform_device *pdev)
ecc);
if (ret) {
dev_err(dev, "CCERRINT (%d) failed --> %d\n", irq, ret);
- return ret;
+ goto err_disable_pm;
}
ecc->ccerrint = irq;
}
@@ -2412,7 +2409,8 @@ static int edma_probe(struct platform_device *pdev)
ecc->dummy_slot = edma_alloc_slot(ecc, EDMA_SLOT_ANY);
if (ecc->dummy_slot < 0) {
dev_err(dev, "Can't allocate PaRAM dummy slot\n");
- return ecc->dummy_slot;
+ ret = ecc->dummy_slot;
+ goto err_disable_pm;
}

queue_priority_mapping = info->queue_priority_mapping;
@@ -2512,6 +2510,9 @@ static int edma_probe(struct platform_device *pdev)

err_reg1:
edma_free_slot(ecc, ecc->dummy_slot);
+err_disable_pm:
+ pm_runtime_put_sync(dev);
+ pm_runtime_disable(dev);
return ret;
}

@@ -2542,6 +2543,8 @@ static int edma_remove(struct platform_device *pdev)
if (ecc->dma_memcpy)
dma_async_device_unregister(ecc->dma_memcpy);
edma_free_slot(ecc, ecc->dummy_slot);
+ pm_runtime_put_sync(dev);
+ pm_runtime_disable(dev);

return 0;
}
--
2.24.0
\
 
 \ /
  Last update: 2019-11-24 06:30    [W:0.099 / U:0.500 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site