lkml.org 
[lkml]   [2019]   [Nov]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v6 0/4] Bluetooth: hci_bcm: Additional changes for BCM4354 support
From
Date
Hi Abhishek,

> While adding support for the BCM4354, I discovered a few more things
> that weren't working as they should have.
>
> First, we disallow serdev from setting the baudrate on BCM4354. Serdev
> sets the oper_speed first before calling hu->setup() in
> hci_uart_setup(). On the BCM4354, this results in bcm_setup() failing
> when the hci reset times out.
>
> Next, we add support for setting the PCM parameters, which consists of
> a pair of vendor specific opcodes to set the pcm parameters. The
> documentation for these params are available in the brcm_patchram_plus
> package (i.e. https://github.com/balena-os/brcm_patchram_plus). This is
> necessary for PCM to work properly.
>
> All changes were tested with rk3288-veyron-minnie.dts.

so I have re-factored your patch set now to apply to latest bluetooth-next tree and posted it to the mailing list. Please have a look at it if this works for you. If it does, then we might just apply it this way and focus on getting detailed PCM codec configuration for all vendors in once we have a second vendor to unify it.

Regards

Marcel

\
 
 \ /
  Last update: 2019-11-23 11:05    [W:0.189 / U:0.528 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site