lkml.org 
[lkml]   [2019]   [Nov]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 4.19 002/219] scsi: lpfc: Fix kernel Oops due to null pring pointers
Date
From: James Smart <jsmart2021@gmail.com>

[ Upstream commit 5a9eeff57f340238c39c95d8e7e54c96fc722de7 ]

Driver is hitting null pring pointers in lpfc_do_work().

Pointer assignment occurs based on SLI-revision. If recovering after an
error, its possible the sli revision for the port was cleared, making the
lpfc_phba_elsring() not return a ring pointer, thus the null pointer.

Add SLI revision checking to lpfc_phba_elsring() and status checking to all
callers.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/lpfc/lpfc.h | 6 ++++++
drivers/scsi/lpfc/lpfc_els.c | 2 ++
drivers/scsi/lpfc/lpfc_init.c | 7 ++++++-
drivers/scsi/lpfc/lpfc_sli.c | 2 ++
4 files changed, 16 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 43732e8d13473..79c3b2f53828e 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -1235,6 +1235,12 @@ lpfc_sli_read_hs(struct lpfc_hba *phba)
static inline struct lpfc_sli_ring *
lpfc_phba_elsring(struct lpfc_hba *phba)
{
+ /* Return NULL if sli_rev has become invalid due to bad fw */
+ if (phba->sli_rev != LPFC_SLI_REV4 &&
+ phba->sli_rev != LPFC_SLI_REV3 &&
+ phba->sli_rev != LPFC_SLI_REV2)
+ return NULL;
+
if (phba->sli_rev == LPFC_SLI_REV4) {
if (phba->sli4_hba.els_wq)
return phba->sli4_hba.els_wq->pring;
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index f3c6801c0b312..3651c0fc88197 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -1340,6 +1340,8 @@ lpfc_els_abort_flogi(struct lpfc_hba *phba)
Fabric_DID);

pring = lpfc_phba_elsring(phba);
+ if (unlikely(!pring))
+ return -EIO;

/*
* Check the txcmplq for an iocb that matches the nport the driver is
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 9acb5b44ce4c1..dae0dd8066f04 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -1801,7 +1801,12 @@ lpfc_sli4_port_sta_fn_reset(struct lpfc_hba *phba, int mbx_action,
lpfc_offline(phba);
/* release interrupt for possible resource change */
lpfc_sli4_disable_intr(phba);
- lpfc_sli_brdrestart(phba);
+ rc = lpfc_sli_brdrestart(phba);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "6309 Failed to restart board\n");
+ return rc;
+ }
/* request and enable interrupt */
intr_mode = lpfc_sli4_enable_intr(phba, phba->intr_mode);
if (intr_mode == LPFC_INTR_ERROR) {
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index a490e63c94b67..266e7101902ef 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -4644,6 +4644,8 @@ lpfc_sli_brdrestart_s4(struct lpfc_hba *phba)
hba_aer_enabled = phba->hba_flag & HBA_AER_ENABLED;

rc = lpfc_sli4_brdreset(phba);
+ if (rc)
+ return rc;

spin_lock_irq(&phba->hbalock);
phba->pport->stopped = 0;
--
2.20.1
\
 
 \ /
  Last update: 2019-11-22 06:29    [W:0.044 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site