lkml.org 
[lkml]   [2019]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v3] input: keyboard: snvs_pwrkey: Send key events for i.MX6 S, DL and Q
Date

On 2019-11-21 0:33, robin <robin@protonic.nl> wrote:
> On 2019-11-20 10:27, Marco Felsch wrote:
> > Hi Robin,
> >
> > On 19-09-16 16:37, Dmitry Torokhov wrote:
> >> On Mon, Sep 16, 2019 at 07:45:37AM +0000, Robin Gong wrote:
> >> > On 2019/9/13 15:31 robin <robin@protonic.nl> wrote:>
> >> > > Hi Dmitry,
> >> > >
> >> > > On 2019-09-12 22:13, Dmitry Torokhov wrote:
> >> > > > Hi Robin,
> >> > > >
> >> > > > On Wed, Sep 04, 2019 at 06:23:29AM +0000, Robin van der Gracht
> wrote:
> >> > > >> The first generation i.MX6 processors does not send an
> >> > > >> interrupt when the power key is pressed. It sends a power down
> >> > > >> request interrupt if the key is released before a hard
> >> > > >> shutdown (5 second press). This should allow software to bring down
> the SoC safely.
> >> > > >>
> >> > > >> For this driver to work as a regular power key with the older
> >> > > >> SoCs, we need to send a keypress AND release when we get the
> >> > > >> power down request irq.
> >> > > >>
> >> > > >> Signed-off-by: Robin van der Gracht <robin@protonic.nl>
> >> > > >> ---
> >> > > >> @@ -67,13 +83,17 @@ static irqreturn_t
> >> > > >> imx_snvs_pwrkey_interrupt(int irq, void *dev_id) {
> >> > > >> struct platform_device *pdev = dev_id;
> >> > > >> struct pwrkey_drv_data *pdata = platform_get_drvdata(pdev);
> >> > > >> + unsigned long expire = jiffies;
> >> > > >> u32 lp_status;
> >> > > >>
> >> > > >> pm_wakeup_event(pdata->input->dev.parent, 0);
> >> > > >>
> >> > > >> regmap_read(pdata->snvs, SNVS_LPSR_REG, &lp_status);
> >> > > >> - if (lp_status & SNVS_LPSR_SPO)
> >> > > >> - mod_timer(&pdata->check_timer, jiffies +
> >> > > >> msecs_to_jiffies(DEBOUNCE_TIME));
> >> > > >> + if (lp_status & SNVS_LPSR_SPO) {
> >> > > >> + if (pdata->minor_rev > 0)
> >> > > >> + expire = jiffies + msecs_to_jiffies(DEBOUNCE_TIME);
> >> > > >> + mod_timer(&pdata->check_timer, expire);
> >> > > >
> >> > > > Why do we even need to fire the timer in case of the first
> >> > > > generation hardware? Just send press and release events directly from
> the ISR.
> >> > That timer looks like a software debounce to prevent unexpected and
> >> > meaningless interrupt/event caused by quick press/release.
> >>
> >> Right, but in case of the first generation hardware we schedule the
> >> timer immediately (expire == 0) and do not check state of the
> >> hardware in the timer handler, but rather simply emit down/up events,
> >> so we do not really get any benefit from the timer (again, I am
> >> talking about first generation hardware only).
> >
> > Did you prepared a v4? Just ask to avoid a duplicated work :)
>
> No I haven't. Not sure what the public wants. Use timer, don't use timer..
>
> v3 has had long term testing though ;)
Sorry for that I miss the mail.
Understood a little bit confusion about immediate timer for
the first press, just stand on the view of clean code shape.
But I'm okay if you prefer to remove timer in the first interrupt
generation.
>
> Regards,
> Robin van der Gracht

\
 
 \ /
  Last update: 2019-11-21 14:19    [W:0.099 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site