lkml.org 
[lkml]   [2019]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] watchdog: make DesignWare watchdog allow users to set bigger timeout value
Date
From d21d084122d08816454a1e338f0946a9da1f81e3 Mon Sep 17 00:00:00 2001
From: Peng Wang <peng.1.wang@nokia-sbell.com>
Date: Wed, 20 Nov 2019 15:12:59 +0800
Subject: [PATCH] watchdog: make DesignWare watchdog allow users to set bigger
timeout value

watchdog_dev.c provides means to allow users to set bigger timeout value
than HW can support, make DesignWare watchdog align with this.

Signed-off-by: Peng Wang <peng.1.wang@nokia-sbell.com>
---
drivers/watchdog/dw_wdt.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/watchdog/dw_wdt.c b/drivers/watchdog/dw_wdt.c
index fef7c61..f1a431c 100644
--- a/drivers/watchdog/dw_wdt.c
+++ b/drivers/watchdog/dw_wdt.c
@@ -114,7 +114,15 @@ static int dw_wdt_set_timeout(struct watchdog_device *wdd, unsigned int top_s)
writel(top_val | top_val << WDOG_TIMEOUT_RANGE_TOPINIT_SHIFT,
dw_wdt->regs + WDOG_TIMEOUT_RANGE_REG_OFFSET);

- wdd->timeout = dw_wdt_top_in_seconds(dw_wdt, top_val);
+ /*
+ * In case users set bigger timeout value than HW can support,
+ * kernel(watchdog_dev.c) helps to feed watchdog before
+ * wdd->timeout
+ */
+ if ( top_s * 1000 <= wdd->max_hw_heartbeat_ms )
+ wdd->timeout = dw_wdt_top_in_seconds(dw_wdt, top_val);
+ else
+ wdd->timeout = top_s;

return 0;
}
--
1.8.3.1
\
 
 \ /
  Last update: 2019-11-21 09:21    [W:0.183 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site