lkml.org 
[lkml]   [2019]   [Nov]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 2/5] arm64: dts: rockchip: Add VMARC RK3399Pro SOM initial support
Hi Heiko,

On Wed, Nov 20, 2019 at 6:59 PM Heiko Stübner <heiko@sntech.de> wrote:
>
> Hi Jagan,
>
> looks good in general, just some small things below:
>
> Am Mittwoch, 20. November 2019, 12:39:20 CET schrieb Jagan Teki:
> > VMARC RK3399Pro SOM is a standard SMARC SOM design with
> > Rockchip RK3399Pro SoC, which is designed by Vamrs.
> >
> > Specification:
> > - Rockchip RK3399Pro
> > - PMIC: RK809-3
> > - SD slot, 16GiB eMMC
> > - 2xUSB-2.0, 1xUSB3.0
> > - USB-C for power supply
> > - Ethernet, PCIe
> > - HDMI, MIPI-DSI/CSI, eDP
> >
> > Add initial support for VMARC RK3399Pro SOM, this would use
> > with associated carrier board.
> >
> > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> > ---
> > .../dts/rockchip/rk3399pro-vmarc-som.dtsi | 339 ++++++++++++++++++
> > 1 file changed, 339 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
> >
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
> > new file mode 100644
> > index 000000000000..ddf6ebc9fbe3
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
> > @@ -0,0 +1,339 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +/*
> > + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
> > + * Copyright (c) 2019 Vamrs Limited
> > + * Copyright (c) 2019 Amarula Solutions(India)
> > + */
> > +
> > +#include <dt-bindings/gpio/gpio.h>
> > +#include <dt-bindings/pinctrl/rockchip.h>
> > +#include <dt-bindings/pwm/pwm.h>
> > +
> > +/ {
> > + compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro";
> > +
> > + clkin_gmac: external-gmac-clock {
> > + compatible = "fixed-clock";
> > + clock-frequency = <125000000>;
> > + clock-output-names = "clkin_gmac";
> > + #clock-cells = <0>;
> > + };
> > +
> > + vcc5v0_sys: vcc5v0-sys-regulator {
> > + compatible = "regulator-fixed";
> > + regulator-name = "vcc5v0_sys";
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <5000000>;
> > + regulator-max-microvolt = <5000000>;
>
> Is vcc5v0_sys really the topmost regulator getting the outside
> power-supply?

Thanks for pointing this, I forgot to check the vin supply in carrier
board schematics, yes it is VCC12V_DCIN (with 5V to 24V range) like
rock-pi-4. Will update the same.

>
>
> > + };
> > +
> > + vcc_lan: vcc3v3-phy-regulator {
> > + compatible = "regulator-fixed";
> > + regulator-name = "vcc_lan";
>
> vcc_lan / vcc_phy is mostly coming from the vendor bsp in some way
> and will be named differently in schematics ... also it should be connected
> to the regulator tree.

Infact bsp named this as vcc_phy, I got the vcc_lan from schematics[1]
page 16. Yes it is using VCCIO_3V3_S0 (SWOUT2 from regulator tree), I
will mark this regulator.

>
> [...]
>
> > +&tsadc {
> > + status = "okay";
> > +
> > + /* tshut mode 0:CRU 1:GPIO */
>
> I think we can live without the additional comments for properties :-)

True, I have reused it from rock-pi-4 thought that it would compatible
with old. will remove.

[1] https://dl.radxa.com/rockpin10/docs/hw/VMARC_RK3399Pro_sch_V1.1_20190619.pdf

Jagan.

\
 
 \ /
  Last update: 2019-11-20 16:52    [W:0.040 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site