Messages in this thread | | | Subject | Re: [PATCH v7 2/3] dwc: PCI: intel: PCIe RC controller driver | From | Dilip Kota <> | Date | Tue, 19 Nov 2019 17:19:57 +0800 |
| |
On 11/19/2019 11:54 AM, Jingoo Han wrote: > > On 11/18/19, 10:15 PM, Dilip Kota wrote: >> On 11/19/2019 10:33 AM, Jingoo Han wrote: >>> On 11/18/19, 8:26 PM, Dilip Kota wrote: >>>> On 11/19/2019 12:40 AM, Jingoo Han wrote: >>>>> On 11/18/19, 2:58 AM, Dilip Kota wrote: >>>>> >>>>>> On 11/16/2019 4:40 AM, Jingoo Han wrote: >>>>>>> On 11/14/19, 9:31 PM, Dilip Kota wrote: >>>>>>> >>>>>>>> Add support to PCIe RC controller on Intel Gateway SoCs. >>>>>>>> PCIe controller is based of Synopsys DesignWare PCIe core. >>>>>>>> >>>>>>>> Intel PCIe driver requires Upconfigure support, Fast Training >>>>>>>> Sequence and link speed configurations. So adding the respective >>>>>>>> helper functions in the PCIe DesignWare framework. >>>>>>>> It also programs hardware autonomous speed during speed >>>>>>>> configuration so defining it in pci_regs.h. >>>>>>>> >>>>>>>> Signed-off-by: Dilip Kota <eswara.kota@linux.intel.com> >>>>>>>> Reviewed-by: Andrew Murray <andrew.murray@arm.com> >>>>>>>> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> >>>>>>>> --- >>>>>>> [.....] >>>>>>> >>>>>>>> drivers/pci/controller/dwc/Kconfig | 10 + >>>>>>>> drivers/pci/controller/dwc/Makefile | 1 + >>>>>>>> drivers/pci/controller/dwc/pcie-designware.c | 57 +++ >>>>>>>> drivers/pci/controller/dwc/pcie-designware.h | 12 + >>>>>>>> drivers/pci/controller/dwc/pcie-intel-gw.c | 542 +++++++++++++++++++++++++++ >>>>>>>> include/uapi/linux/pci_regs.h | 1 + >>>>>>>> 6 files changed, 623 insertions(+) >>>>>>>> create mode 100644 drivers/pci/controller/dwc/pcie-intel-gw.c >>>>>>>> >>>>>>>> diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig >>>>>>>> index 0ba988b5b5bc..fb6d474477df 100644 >>>>>>>> --- a/drivers/pci/controller/dwc/Kconfig >>>>>>>> +++ b/drivers/pci/controller/dwc/Kconfig >>>>>>>> @@ -82,6 +82,16 @@ config PCIE_DW_PLAT_EP >>>>>>>> order to enable device-specific features PCI_DW_PLAT_EP must be >>>>>>>> selected. >>>>>>>> >>>>>>>> +config PCIE_INTEL_GW >>>>>>>> + bool "Intel Gateway PCIe host controller support" >>>>>>>> + depends on OF && (X86 || COMPILE_TEST) >>>>>>>> + select PCIE_DW_HOST >>>>>>>> + help >>>>>>>> + Say 'Y' here to enable PCIe Host controller support on Intel >>>>>>>> + Gateway SoCs. >>>>>>>> + The PCIe controller uses the DesignWare core plus Intel-specific >>>>>>>> + hardware wrappers. >>>>>>>> + >>>>>>> Please add this config alphabetical order! >>>>>>> So, this config should be after 'config PCI_IMX6'. >>>>>>> There is no reason to put this config at the first place. >>>>>>> >>>>>>>> config PCI_EXYNOS >>>>>>>> bool "Samsung Exynos PCIe controller" >>>>>>>> depends on SOC_EXYNOS5440 || COMPILE_TEST >>>>>>>> diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile >>>>>>>> index b30336181d46..99db83cd2f35 100644 >>>>>>>> --- a/drivers/pci/controller/dwc/Makefile >>>>>>>> +++ b/drivers/pci/controller/dwc/Makefile >>>>>>>> @@ -3,6 +3,7 @@ obj-$(CONFIG_PCIE_DW) += pcie-designware.o >>>>>>>> obj-$(CONFIG_PCIE_DW_HOST) += pcie-designware-host.o >>>>>>>> obj-$(CONFIG_PCIE_DW_EP) += pcie-designware-ep.o >>>>>>>> obj-$(CONFIG_PCIE_DW_PLAT) += pcie-designware-plat.o >>>>>>>> +obj-$(CONFIG_PCIE_INTEL_GW) += pcie-intel-gw.o >>>>>>> Ditto. >>>>>> PCIE_INTEL_GW wouldnt come after PCI_IMX6, the complete Makefile and >>>>>> Kconfig are not in order,( PCI_* and PCIE_* are not in any order). So i >>>>>> just followed PCIE_DW and placed PCIE_INTEL_GW after PCIE_DW as I is >>>>>> after D (and i see PCI_* immediately after the PCIE_DW*, so i placed >>>>>> PCIE_INTEL_GW after PCIE_DW* and before PCI_*). >>>>> Hey, although some of them are not in order, you don't have a right to do so. >>>>> If some people do not follow the law, it does not mean that you can break the law. >>>>> Anyway, if you don't follow an alphabetical order, my answer is NACK. >>>>> Also, other people or I will send a patch to fix the order of other drivers. >>>> I am not against following the order. I kept PCIE_INTEL_GW after >>>> PCIE_DW* by checking the best possible order. >>>> As per the alphabetical order, i see all CONFIG_PCIE_* comes first and >>>> CONFIG_PCI_* follows. So, by following this, i placed PCIE_INTEL_GW >>>> after PCIE_DW* (for the same reason PCIE_INTEL_GW cannot be placed after >>>> PCI_IMX6). >>>> Even after re-ordering the Kconfig and Makefile, still PCIE_INTEL_GW >>>> comes after PCIE_DW_PLAT( and PCIE_HISI_STB). >>> Are you kidding me? >>> >>> Most PCIE_* drivers are located after PCI_*. Look at PCIE_QCOM, PCIE_ARMADA_8K, >>> PCIE_ARTPEC6, PCIE_KIRIN, PCIE_HISI_STB, PCIE_TEGRA194, PCIE_UNIPHIER, PCIE_AL. >> Ok, So the understanding is PCIE_DW* will be at top as they are >> framework and then comes CONFIG_PCI_*, CONFIG_PCIE_*. > Yes, right. > Ah, I will explain the order of Kconfig options in the dwc directory. > The order is PCIE_DW, PCI_*, and PCIE_* as below. > > 1. Common Frameworks: > These options are used by other controller drivers. > e.g., PCIE_DW, PCIE_DW_HOST, PCIE_DW_EP. > > 2. PCI_* controller drivers: > PCI_* was used earlier than PCIE_*. If a chip vendor's controllers provide > both conventional PCI and PCI Express, or only conventional PCI, PCI_* can > be used. For example, the reason PCI_EXYNOS was chosen instead of > PCIE_EXYNOS, is that EXYNOS had controllers to support either conventional > PCI or PCI Express. > > 3. PCIE_* controller drivers > If a controller can support only PCI Express, not conventional PCI, > PCIE_* is the proper naming. > > Then, within PCI_* or PCIE_* categories, each controller option should be > in an alphabetical order for the readability. Also, other person or I will > send a patch to fix orders. (e.g., PCIE_QCOM, PCIE_AL, etc.)
Thanks Jingoo Han for explaining in detail.
Regards, Dilip
>>> Put PCIE_INTEL_GW between PCIE_ARTPEC6_EP and PCIE_KIRIN. >> Ok. I will update in the next patch version. > Ok, thank you. > > Best regards, > Jingoo Han > >
| |