Messages in this thread | | | From | Marco Franchi <> | Date | Tue, 19 Nov 2019 10:02:54 -0200 | Subject | Re: [PATCH] arm64: dts: freescale: add initial support for Google i.MX 8MQ Phanbell |
| |
Hello Fabio,
Em seg., 18 de nov. de 2019 às 17:29, Fabio Estevam <festevam@gmail.com> escreveu: > > Hi Marco, > > On Mon, Nov 18, 2019 at 11:16 AM Marco Franchi <marcofrk@gmail.com> wrote: > > > > Also, is the schematics available? > > Yes: https://storage.googleapis.com/site_and_emails_static_assets/Files/Coral-Dev-Board-baseboard-schematic.pdf > > Thanks. Would you also have the schematics for the SOM board? I could not find the schematic, but at this page you will find a lot of information regarding it: https://coral.withgoogle.com/docs/som/datasheet/ > > I tooked a quick look and I see a ALC5635 codec, but the dts shows > WM8524 instead. > > Which one is correct? Internally they are using WM8524, but I will confirm and test it again. > > > If I applied this change, I won't be able to boot the board, due to > > the U-Boot dependence. > > Should I try to apply the U-Boot mainline support first? > > You could build the mainline dtb and rename it with the fsl prefix > locally so you could boot test it. Cool! Thanks. > > Forgot to mention, but you also need to add a separate patch that adds > this board entry into Documentation/devicetree/bindings/arm/fsl.yaml Ok. > > Regards, > > Fabio Estevam
Thanks Fabio, I will apply these points too.
BR, Marco
| |