lkml.org 
[lkml]   [2019]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v7 2/3] dwc: PCI: intel: PCIe RC controller driver
From
Date

On 11/16/2019 4:40 AM, Jingoo Han wrote:
> On 11/14/19, 9:31 PM, Dilip Kota wrote:
>
>> Add support to PCIe RC controller on Intel Gateway SoCs.
>> PCIe controller is based of Synopsys DesignWare PCIe core.
>>
>> Intel PCIe driver requires Upconfigure support, Fast Training
>> Sequence and link speed configurations. So adding the respective
>> helper functions in the PCIe DesignWare framework.
>> It also programs hardware autonomous speed during speed
>> configuration so defining it in pci_regs.h.
>>
>> Signed-off-by: Dilip Kota <eswara.kota@linux.intel.com>
>> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
>> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
>> ---
> [.....]
>
>> drivers/pci/controller/dwc/Kconfig | 10 +
>> drivers/pci/controller/dwc/Makefile | 1 +
>> drivers/pci/controller/dwc/pcie-designware.c | 57 +++
>> drivers/pci/controller/dwc/pcie-designware.h | 12 +
>> drivers/pci/controller/dwc/pcie-intel-gw.c | 542 +++++++++++++++++++++++++++
>> include/uapi/linux/pci_regs.h | 1 +
>> 6 files changed, 623 insertions(+)
>> create mode 100644 drivers/pci/controller/dwc/pcie-intel-gw.c
>>
>> diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
>> index 0ba988b5b5bc..fb6d474477df 100644
>> --- a/drivers/pci/controller/dwc/Kconfig
>> +++ b/drivers/pci/controller/dwc/Kconfig
>> @@ -82,6 +82,16 @@ config PCIE_DW_PLAT_EP
>> order to enable device-specific features PCI_DW_PLAT_EP must be
>> selected.
>>
>> +config PCIE_INTEL_GW
>> + bool "Intel Gateway PCIe host controller support"
>> + depends on OF && (X86 || COMPILE_TEST)
>> + select PCIE_DW_HOST
>> + help
>> + Say 'Y' here to enable PCIe Host controller support on Intel
>> + Gateway SoCs.
>> + The PCIe controller uses the DesignWare core plus Intel-specific
>> + hardware wrappers.
>> +
> Please add this config alphabetical order!
> So, this config should be after 'config PCI_IMX6'.
> There is no reason to put this config at the first place.
>
>> config PCI_EXYNOS
>> bool "Samsung Exynos PCIe controller"
>> depends on SOC_EXYNOS5440 || COMPILE_TEST
>> diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
>> index b30336181d46..99db83cd2f35 100644
>> --- a/drivers/pci/controller/dwc/Makefile
>> +++ b/drivers/pci/controller/dwc/Makefile
>> @@ -3,6 +3,7 @@ obj-$(CONFIG_PCIE_DW) += pcie-designware.o
>> obj-$(CONFIG_PCIE_DW_HOST) += pcie-designware-host.o
>> obj-$(CONFIG_PCIE_DW_EP) += pcie-designware-ep.o
>> obj-$(CONFIG_PCIE_DW_PLAT) += pcie-designware-plat.o
>> +obj-$(CONFIG_PCIE_INTEL_GW) += pcie-intel-gw.o
> Ditto.
PCIE_INTEL_GW wouldnt come after PCI_IMX6, the complete Makefile and
Kconfig are not in order,( PCI_* and PCIE_* are not in any order). So i
just followed PCIE_DW and placed PCIE_INTEL_GW after PCIE_DW as I is
after D (and i see PCI_* immediately after the PCIE_DW*, so i placed
PCIE_INTEL_GW after PCIE_DW* and before PCI_*).

Regards,
Dilip

>
> Best regards,
> Jingoo Han
>
>> obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o
>> obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
>> obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
>> diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
>> index 820488dfeaed..479e250695a0 100644
> [.....]

\
 
 \ /
  Last update: 2019-11-18 08:59    [W:0.133 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site