lkml.org 
[lkml]   [2019]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 03/16] dt-bindings: remoteproc: qcom: Add Q6V5 Modem PIL binding for SC7180
Date
Add a new modem compatible string for Qualcomm SC7180 SoCs and introduce
the "qcom,halt-nav-regs" bindings needed by the modem sub-system running
on SC7180 SoCs.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
---
.../bindings/remoteproc/qcom,q6v5.txt | 23 +++++++++++++++++--
1 file changed, 21 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
index c416746f93cfd..88dfa3fc15f78 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
@@ -13,6 +13,7 @@ on the Qualcomm Hexagon core.
"qcom,msm8974-mss-pil"
"qcom,msm8996-mss-pil"
"qcom,msm8998-mss-pil"
+ "qcom,sc7180-mss-pil"
"qcom,sdm845-mss-pil"

- reg:
@@ -43,6 +44,7 @@ on the Qualcomm Hexagon core.
must be "wdog", "fatal", "ready", "handover", "stop-ack"
qcom,msm8996-mss-pil:
qcom,msm8998-mss-pil:
+ qcom,sc7180-mss-pil:
qcom,sdm845-mss-pil:
must be "wdog", "fatal", "ready", "handover", "stop-ack",
"shutdown-ack"
@@ -75,6 +77,9 @@ on the Qualcomm Hexagon core.
qcom,msm8998-mss-pil:
must be "iface", "bus", "mem", "xo", "gpll0_mss",
"snoc_axi", "mnoc_axi", "qdss"
+ qcom,sc7180-mss-pil:
+ must be "iface", "bus", "xo", "snoc_axi", "mnoc_axi",
+ "mss_crypto", "mss_nav", "nav"
qcom,sdm845-mss-pil:
must be "iface", "bus", "mem", "xo", "gpll0_mss",
"snoc_axi", "mnoc_axi", "prng"
@@ -86,7 +91,7 @@ on the Qualcomm Hexagon core.
reference to the list of 3 reset-controllers for the
wcss sub-system
reference to the list of 2 reset-controllers for the modem
- sub-system on SDM845 SoCs
+ sub-system on SC7180, SDM845 SoCs

- reset-names:
Usage: required
@@ -95,7 +100,7 @@ on the Qualcomm Hexagon core.
must be "wcss_aon_reset", "wcss_reset", "wcss_q6_reset"
for the wcss sub-system
must be "mss_restart", "pdc_reset" for the modem
- sub-system on SDM845 SoCs
+ sub-system on SC7180, SDM845 SoCs

For the compatible strings below the following supplies are required:
"qcom,q6v5-pil"
@@ -144,6 +149,7 @@ For the compatible string below the following supplies are required:
qcom,msm8996-mss-pil:
qcom,msm8998-mss-pil:
must be "cx", "mx"
+ qcom,sc7180-mss-pil:
qcom,sdm845-mss-pil:
must be "cx", "mx", "mss", "load_state"

@@ -165,6 +171,19 @@ For the compatible string below the following supplies are required:
by the three offsets within syscon for q6, modem and nc
halt registers.

+For the compatible strings below the following phandle references are required:
+ "qcom,sc7180-mss-pil"
+- qcom,halt-nav-regs:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: reference to a list of 2 phandles with one offset each for
+ the modem sub-system running on SC7180 SoC. The first
+ phandle reference is to the mss clock node followed by the
+ offset within register space for nav halt register. The
+ second phandle reference is to a syscon representing TCSR
+ followed by the offset within syscon for conn_box_spare0
+ register.
+
= SUBNODES:
The Hexagon node must contain two subnodes, named "mba" and "mpss" representing
the memory regions used by the Hexagon firmware. Each sub-node must contain:
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
\
 
 \ /
  Last update: 2019-11-18 22:44    [W:0.050 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site