lkml.org 
[lkml]   [2019]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6] ARM: dts: exynos5420: add mali dt node and enable mali on Odroid XU3/4
On Fri, Nov 15, 2019 at 10:12:11AM +1030, Marian Mihailescu wrote:
> Add device tree node for Mali GPU for Exynos 542x SoC.
> GPU is disabled by default, and is enabled for each board after the
> regulator is defined. Tested on Odroid-XU4.
>
> Signed-off-by: Marian Mihailescu <mihailescu2m@gmail.com>
> ---
>
> Changes since v5:
> - fixed compile warnings
>
> Changes since v4:
> - fixed so it applies for latest 5.4-rc7
>
> Changes since v3:
> - fixed compatible to match bindings
>
> Changes since v2:
> - separate patch for bindings
> - fixed bindings typo
>
> Changes since v1:
> - used generic node and label for GPU
> - added bindings for compatible
> - fixed irq indentation
> - fixed interrupt-names to match bindings
> - added cooling cells for future TMU connection
> - used generic node and label for GPU opp table
> - removed always-on from SoC GPU regulator
>
> ---
> arch/arm/boot/dts/exynos5420.dtsi | 50 +++++++++++++++++++++++++++
> arch/arm/boot/dts/exynos5422-odroid-core.dtsi | 6 +++-

Thanks, applied.

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2019-11-18 13:49    [W:0.040 / U:0.892 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site