lkml.org 
[lkml]   [2019]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 6/8] pwm: sun4i: Add support for H6 PWM
Date
From: Jernej Skrabec <jernej.skrabec@siol.net>

Now that sun4i PWM driver supports deasserting reset line and enabling
bus clock, support for H6 PWM can be added.

Note that while H6 PWM has two channels, only first one is wired to
output pin. Second channel is used as a clock source to companion AC200
chip which is bundled into same package.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
---
drivers/pwm/pwm-sun4i.c | 9 +++++++++
1 file changed, 9 insertions(+)

diff --git a/drivers/pwm/pwm-sun4i.c b/drivers/pwm/pwm-sun4i.c
index b64250b7e2be..8d6699659db7 100644
--- a/drivers/pwm/pwm-sun4i.c
+++ b/drivers/pwm/pwm-sun4i.c
@@ -358,6 +358,12 @@ static const struct sun4i_pwm_data sun4i_pwm_single_bypass = {
.npwm = 1,
};

+static const struct sun4i_pwm_data sun50i_h6_pwm_data = {
+ .has_prescaler_bypass = true,
+ .has_direct_mod_clk_output = true,
+ .npwm = 2,
+};
+
static const struct of_device_id sun4i_pwm_dt_ids[] = {
{
.compatible = "allwinner,sun4i-a10-pwm",
@@ -374,6 +380,9 @@ static const struct of_device_id sun4i_pwm_dt_ids[] = {
}, {
.compatible = "allwinner,sun8i-h3-pwm",
.data = &sun4i_pwm_single_bypass,
+ }, {
+ .compatible = "allwinner,sun50i-h6-pwm",
+ .data = &sun50i_h6_pwm_data,
}, {
/* sentinel */
},
--
2.20.1
\
 
 \ /
  Last update: 2019-11-18 10:38    [W:0.047 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site