lkml.org 
[lkml]   [2019]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH AUTOSEL 4.19 115/237] spi: uniphier: fix incorrect property items
    Date
    From: Keiji Hayashibara <hayashibara.keiji@socionext.com>

    [ Upstream commit 3511ba7d4ca6f39e2d060bb94e42a41ad1fee7bf ]

    This commit fixes incorrect property because it was different
    from the actual.
    The parameters of '#address-cells' and '#size-cells' were removed,
    and 'interrupts', 'pinctrl-names' and 'pinctrl-0' were added.

    Fixes: 4dcd5c2781f3 ("spi: add DT bindings for UniPhier SPI controller")
    Signed-off-by: Keiji Hayashibara <hayashibara.keiji@socionext.com>
    Signed-off-by: Mark Brown <broonie@kernel.org>
    Signed-off-by: Sasha Levin <sashal@kernel.org>
    ---
    .../devicetree/bindings/spi/spi-uniphier.txt | 14 ++++++++------
    1 file changed, 8 insertions(+), 6 deletions(-)

    diff --git a/Documentation/devicetree/bindings/spi/spi-uniphier.txt b/Documentation/devicetree/bindings/spi/spi-uniphier.txt
    index 504a4ecfc7b16..b04e66a52de5d 100644
    --- a/Documentation/devicetree/bindings/spi/spi-uniphier.txt
    +++ b/Documentation/devicetree/bindings/spi/spi-uniphier.txt
    @@ -5,18 +5,20 @@ UniPhier SoCs have SCSSI which supports SPI single channel.
    Required properties:
    - compatible: should be "socionext,uniphier-scssi"
    - reg: address and length of the spi master registers
    - - #address-cells: must be <1>, see spi-bus.txt
    - - #size-cells: must be <0>, see spi-bus.txt
    - - clocks: A phandle to the clock for the device.
    - - resets: A phandle to the reset control for the device.
    + - interrupts: a single interrupt specifier
    + - pinctrl-names: should be "default"
    + - pinctrl-0: pin control state for the default mode
    + - clocks: a phandle to the clock for the device
    + - resets: a phandle to the reset control for the device

    Example:

    spi0: spi@54006000 {
    compatible = "socionext,uniphier-scssi";
    reg = <0x54006000 0x100>;
    - #address-cells = <1>;
    - #size-cells = <0>;
    + interrupts = <0 39 4>;
    + pinctrl-names = "default";
    + pinctrl-0 = <&pinctrl_spi0>;
    clocks = <&peri_clk 11>;
    resets = <&peri_rst 11>;
    };
    --
    2.20.1
    \
     
     \ /
      Last update: 2019-11-16 17:50    [W:4.036 / U:0.132 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site