lkml.org 
[lkml]   [2019]   [Nov]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] tpm_tis: turn on TPM before calling tpm_get_timeouts
On Fri, Nov 15, 2019 at 07:43:29PM +0200, Jarkko Sakkinen wrote:
> On Thu, Nov 14, 2019 at 12:56:29PM -0400, Jason Gunthorpe wrote:
> > On Thu, Nov 14, 2019 at 06:55:06PM +0200, Jarkko Sakkinen wrote:
> > > > Would it function with the timeout values set at the beginning of
> > > > tpm_tis_core_init (max values)?
> > >
> > > tpm_get_timeouts() should be replaced with:
> > >
> > > if (tpm_chip_start()) {
> > > dev_err(dev, "Could not get TPM timeouts and durations\n");
> > > rc = -ENODEV;
> > > goto out_err;
> > > }
> > >
> > > tpm_stop_chip(chip);
> > >
> > > tpm_get_timeouts() is called by tpm_auto_startup(). Also the function
> > > should be moved to tpm_chip.c and converted to a static function so
> > > that it won't be called from random cal sites like above.
> >
> > Careful, the design here was to allow a driver to do only
> > get_timeouts, then additional setup work, then do auto_startup()
> >
> > Forcing a driver to do auto_startup too early may not be good.
>
> All drivers always do it anyway because all drivers always call
> tpm_chip_register().

But chip_register is after the driver has done it's setup and after it
may have called get_timeouts

auto_setup should not be moved to before chip_register()

Jason

\
 
 \ /
  Last update: 2019-11-15 19:36    [W:0.075 / U:6.856 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site