lkml.org 
[lkml]   [2019]   [Nov]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] dt-bindings: interrupt-controller: Convert stm32-exti to json-schema
From
Date


On 11/15/19 6:41 PM, Rob Herring wrote:
> On Fri, Nov 15, 2019 at 11:28 AM Alexandre Torgue
> <alexandre.torgue@st.com> wrote:
>>
>>
>>
>> On 11/14/19 6:18 PM, Rob Herring wrote:
>>> On Thu, Nov 14, 2019 at 10:41 AM Alexandre Torgue
>>> <alexandre.torgue@st.com> wrote:
>>>>
>>>> Convert the STM32 external interrupt controller (EXTI) binding to DT
>>>> schema format using json-schema.
>>>>
>>>> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
>>>> ---
>>>>
>>>> Hi Rob,
>>>>
>>>> I planned to use "additionalProperties: false" for this schema but as I add a
>>>> property under condition, I got an error (property added under contion seems
>>>> to be detected as an "additional" property and then error is raised).
>>>>
>>>> Is there a way to fix that ?
>>>
>>> See below.
>>>
>>>>
>>>> regards
>>>> Alex
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt
>>>> deleted file mode 100644
>>>> index cd01b2292ec6..000000000000
>>>> --- a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt
>>>> +++ /dev/null
>>>> @@ -1,29 +0,0 @@
>>>> -STM32 External Interrupt Controller
>>>> -
>>>> -Required properties:
>>>> -
>>>> -- compatible: Should be:
>>>> - "st,stm32-exti"
>>>> - "st,stm32h7-exti"
>>>> - "st,stm32mp1-exti"
>>>> -- reg: Specifies base physical address and size of the registers
>>>> -- interrupt-controller: Indentifies the node as an interrupt controller
>>>> -- #interrupt-cells: Specifies the number of cells to encode an interrupt
>>>> - specifier, shall be 2
>>>> -- interrupts: interrupts references to primary interrupt controller
>>>> - (only needed for exti controller with multiple exti under
>>>> - same parent interrupt: st,stm32-exti and st,stm32h7-exti)
>>>> -
>>>> -Optional properties:
>>>> -
>>>> -- hwlocks: reference to a phandle of a hardware spinlock provider node.
>>>> -
>>>> -Example:
>>>> -
>>>> -exti: interrupt-controller@40013c00 {
>>>> - compatible = "st,stm32-exti";
>>>> - interrupt-controller;
>>>> - #interrupt-cells = <2>;
>>>> - reg = <0x40013C00 0x400>;
>>>> - interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>;
>>>> -};
>>>> diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml
>>>> new file mode 100644
>>>> index 000000000000..39be37e1e532
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml
>>>> @@ -0,0 +1,82 @@
>>>> +# SPDX-License-Identifier: GPL-2.0
>>>
>>> If ST has copyright on the old binding, can you add BSD here.
>>>
>>
>> I will.
>>
>>>> +%YAML 1.2
>>>> +---
>>>> +$id: http://devicetree.org/schemas/interrupt-controller/st,stm32-exti.yaml#
>>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>>> +
>>>> +title: STM32 External Interrupt Controller Device Tree Bindings
>>>> +
>>>> +maintainers:
>>>> + - Alexandre Torgue <alexandre.torgue@st.com>
>>>> + - Ludovic Barre <ludovic.barre@st.com>
>>>> +
>>>> +properties:
>>>> + compatible:
>>>> + oneOf:
>>>> + - items:
>>>> + - enum:
>>>> + - st,stm32-exti
>>>> + - st,stm32h7-exti
>>>> + - items:
>>>> + - enum:
>>>> + - st,stm32mp1-exti
>>>> + - const: syscon
>>>> +
>>>> + "#interrupt-cells":
>>>> + const: 2
>>>> +
>>>> + reg:
>>>> + maxItems: 1
>>>> +
>>>> + interrupt-controller: true
>>>> +
>>>> + hwlocks:
>>>> + maxItems: 1
>>>> + description:
>>>> + Reference to a phandle of a hardware spinlock provider node.
>>>> +
>>>> +required:
>>>> + - "#interrupt-cells"
>>>> + - compatible
>>>> + - reg
>>>> + - interrupt-controller
>>>> +
>>>> +allOf:
>>>> + - $ref: /schemas/interrupt-controller.yaml#
>>>> + - if:
>>>> + properties:
>>>> + compatible:
>>>> + contains:
>>>> + enum:
>>>> + - st,stm32-exti
>>>> + - st,stm32h7-exti
>>>> + then:
>>>> + properties:
>>>> + interrupts:
>>>> + allOf:
>>>> + - $ref: /schemas/types.yaml#/definitions/uint32-array
>>>
>>> Standard property, doesn't need a type. You just need 'maxItems' or an
>>> 'items' list if the index is not meaningful. This appears to be the
>>> former case.
>>
>> ok
>>
>>>
>>>> + description:
>>>> + Interrupts references to primary interrupt controller
>>>> + required:
>>>> + - interrupts
>>>
>>> You can move the definition to the main section as you only need
>>> 'required' here. That should fix your additionalProperties issue.
>>>
>> Doing that it fails as I don't have interrupts define for mp1
>> compatible. Maybe I missed something ?
>
> Like this:
>
> properties:
> ...
> interrupts:
> maxItems: ??
> minItems: ??
>
> allOf:
> - $ref: /schemas/interrupt-controller.yaml#
> - if:
> properties:
> compatible:
> contains:
> enum:
> - st,stm32-exti
> - st,stm32h7-exti
> then:
> required:
> - interrupts
>

Yes it is better :). Let me send the V2

Thanks
Alex

\
 
 \ /
  Last update: 2019-11-15 19:12    [W:0.055 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site