lkml.org 
[lkml]   [2019]   [Nov]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 2/2] arm64: dts: realtek: Add RTD1619 SoC and Realtek Mjolnir EVB
From
Date
Am 15.11.19 um 15:52 schrieb James Tai:
>>> Add Device Trees for Realtek RTD1619 SoC family, RTD1619 SoC and
>>> Realtek Mjolnir EVB.
>>>
>>> Signed-off-by: James Tai <james.tai@realtek.com>
>>> ---
>>
>> Lacking the requested changelog.
>>
>>> arch/arm64/boot/dts/realtek/Makefile | 2 +
>>> .../boot/dts/realtek/rtd1619-mjolnir.dts | 40 +++++
>>> arch/arm64/boot/dts/realtek/rtd1619.dtsi | 12 ++
>>> arch/arm64/boot/dts/realtek/rtd16xx.dtsi | 163
>> ++++++++++++++++++
>>> 4 files changed, 217 insertions(+)
>>> create mode 100644 arch/arm64/boot/dts/realtek/rtd1619-mjolnir.dts
>>> create mode 100644 arch/arm64/boot/dts/realtek/rtd1619.dtsi
>>> create mode 100644 arch/arm64/boot/dts/realtek/rtd16xx.dtsi
>>
>> Somehow the last hunk (rtd16xx.dtsi) didn't apply with git-am or patch -p1, not
>> sure why. I have manually copied the file into place and fixed up some more
>> nits below:
>>
>>>
>>> diff --git a/arch/arm64/boot/dts/realtek/Makefile
>>> b/arch/arm64/boot/dts/realtek/Makefile
>>> index 555638ada721..fb5f05978ecc 100644
>>> --- a/arch/arm64/boot/dts/realtek/Makefile
>>> +++ b/arch/arm64/boot/dts/realtek/Makefile
>>> @@ -7,3 +7,5 @@ dtb-$(CONFIG_ARCH_REALTEK) +=
>> rtd1295-probox2-ava.dtb
>>> dtb-$(CONFIG_ARCH_REALTEK) += rtd1295-zidoo-x9s.dtb
>>>
>>> dtb-$(CONFIG_ARCH_REALTEK) += rtd1296-ds418.dtb
>>> +
>>> +dtb-$(CONFIG_ARCH_REALTEK) += rtd1619-mjolnir.dtb
>>> diff --git a/arch/arm64/boot/dts/realtek/rtd1619-mjolnir.dts
>>> b/arch/arm64/boot/dts/realtek/rtd1619-mjolnir.dts
>>> new file mode 100644
>>> index 000000000000..6ab791af3896
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/realtek/rtd1619-mjolnir.dts
>>> @@ -0,0 +1,40 @@
>>> +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
>>> +/*
>>> + * Copyright (c) 2019 Realtek Semiconductor Corp.
>>> + */
>>> +
>>> +/dts-v1/;
>>> +
>>> +#include "rtd1619.dtsi"
>>> +
>>> +/ {
>>> + compatible = "realtek,rtd1619", "realtek,mjolnir";
>>
>> Order not fixed from v2. This is a schema violation and logically wrong.
>>
>>> + model= "Realtek Mjolnir EVB";
>>
>> Space missing before =. Missed that in v2.
>>
>>> +
>>> + memory@0 {
>>> + device_type = "memory";
>>> + reg = <0x0 0x80000000>;
>>> + };
>>> +
>>> + chosen {
>>> + stdout-path = "serial0:115200n8";
>>> + };
>>> +
>>> + aliases {
>>> + serial0 = &uart0; /* The UART0 is debug console */
>>> + serial1 = &uart1; /* The UART1 is on M.2 slot */
>>> + serial2 = &uart2; /* The UART2 is on GPIO connector */
>>> + };
>>> +};
>>> +
>>> +&uart0 {
>>> + status = "okay";
>>> +};
>>> +
>>> +&uart1 {
>>> + status = "disabled";
>>> +};
>>> +
>>> +&uart2 {
>>> + status = "disabled";
>>> +};
>>
>> The comments were intended to go above each node, not after the aliases.
>> I've taken the liberty to annotate them further with their PCB label.
>>
>>> diff --git a/arch/arm64/boot/dts/realtek/rtd1619.dtsi
>>> b/arch/arm64/boot/dts/realtek/rtd1619.dtsi
>>> new file mode 100644
>>> index 000000000000..e52bf708b04e
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/realtek/rtd1619.dtsi
>>> @@ -0,0 +1,12 @@
>>> +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
>>> +/*
>>> + * Realtek RTD1619 SoC
>>> + *
>>> + * Copyright (c) 2019 Realtek Semiconductor Corp.
>>> + */
>>> +
>>> +#include "rtd16xx.dtsi"
>>> +
>>> +/ {
>>> + compatible = "realtek,rtd1619";
>>> +};
>>> diff --git a/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
>>> b/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
>>> new file mode 100644
>>> index 000000000000..d9b572a870f5
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
>>> @@ -0,0 +1,163 @@
>>> +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
>>> +/*
>>> + * Realtek RTD16xx SoC family
>>> + *
>>> + * Copyright (c) 2019 Realtek Semiconductor Corp.
>>> + */
>>> +
>>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>>> +#include <dt-bindings/interrupt-controller/irq.h>
>>> +
>>> +/{
>>
>> Space missing. Missed that in v2.
>>
>>> + interrupt-parent = <&gic>;
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> +
>>> + cpus {
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> +
>>> + cpu0: cpu@0 {
>>> + device_type = "cpu";
>>> + compatible = "arm,cortex-a55";
>>> + reg = <0x0>;
>>> + enable-method = "psci";
>>> + next-level-cache = <&l2>;
>>> + };
>>> +
>>> + cpu1: cpu@100 {
>>> + device_type = "cpu";
>>> + compatible = "arm,cortex-a55";
>>> + reg = <0x100>;
>>> + enable-method = "psci";
>>> + next-level-cache = <&l3>;
>>> + };
>>> +
>>> + cpu2: cpu@200 {
>>> + device_type = "cpu";
>>> + compatible = "arm,cortex-a55";
>>> + reg = <0x200>;
>>> + enable-method = "psci";
>>> + next-level-cache = <&l3>;
>>> + };
>>> +
>>> + cpu3: cpu@300 {
>>> + device_type = "cpu";
>>> + compatible = "arm,cortex-a55";
>>> + reg = <0x300>;
>>> + enable-method = "psci";
>>> + next-level-cache = <&l3>;
>>> + };
>>> +
>>> + cpu4: cpu@400 {
>>> + device_type = "cpu";
>>> + compatible = "arm,cortex-a55";
>>> + reg = <0x400>;
>>> + enable-method = "psci";
>>> + next-level-cache = <&l3>;
>>> + };
>>> +
>>> + cpu5: cpu@500 {
>>> + device_type = "cpu";
>>> + compatible = "arm,cortex-a55";
>>> + reg = <0x500>;
>>> + enable-method = "psci";
>>> + next-level-cache = <&l3>;
>>> + };
>>> +
>>> + l2: l2-cache {
>>> + compatible = "cache";
>>> + next-level-cache = <&l3>;
>>> +
>>> + };
>>> +
>>> + l3: l3-cache {
>>> + compatible = "cache";
>>> + };
>>> + };
>>> +
>>> + timer {
>>> + compatible = "arm,armv8-timer";
>>> + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
>>> + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
>>> + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
>>> + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
>>> + };
>>> +
>>> + arm_pmu: pmu {
>>> + compatible = "arm,armv8-pmuv3";
>>> + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
>>> + };
>>> +
>>> + psci {
>>> + compatible = "arm,psci-1.0";
>>> + method = "smc";
>>> + };
>>> +
>>> + osc27M: osc {
>>> + compatible = "fixed-clock";
>>> + clock-frequency = <27000000>;
>>> + clock-output-names = "osc27M";
>>> + #clock-cells = <0>;
>>> + };
>>> +
>>> + soc@98000000 {
>>
>> If the node has a unit address, it also needs a reg property with that value. So
>> let's drop the unit address.
>>
>>> + compatible = "simple-bus";
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + ranges = <0x98000000 0x98000000 0x68000000>;
>>> +
>>> + rbus: r-bus@98000000 {
>>> + compatible = "simple-bus";
>>> + reg = <0x98000000 0x200000>;
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + ranges = <0x0 0x98000000 0x200000>;
>>> +
>>> + uart0: serial0@7800 {
>>> + compatible = "snps,dw-apb-uart";
>>> + reg = <0x7800 0x400>;
>>> + reg-shift = <2>;
>>> + reg-io-width = <4>;
>>> + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
>>> + clock-frequency = <27000000>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + uart1: serial1@1b200 {
>>> + compatible = "snps,dw-apb-uart";
>>> + reg = <0x1b200 0x400>;
>>> + reg-shift = <2>;
>>> + reg-io-width = <4>;
>>> + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
>>> + clock-frequency = <432000000>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + uart2: serial2@1b400 {
>>> + compatible = "snps,dw-apb-uart";
>>> + reg = <0x1b400 0x400>;
>>> + reg-shift = <2>;
>>> + reg-io-width = <4>;
>>> + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
>>> + clock-frequency = <432000000>;
>>> + status = "disabled";
>>> + };
>>> + };
>>> +
>>> + gic: interrupt-controller@ff100000 {
>>> + compatible = "arm,gic-v3";
>>> + reg = <0xff100000 0x10000>,
>>> + <0xff140000 0xc0000>;
>>> + interrupt-controller;
>>> + #interrupt-cells = <3>;
>>> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
>>> + };
>>> + };
>>> +};
>>> +
>>> +&arm_pmu {
>>> + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>,
>>> + <&cpu3>, <&cpu4>, <&cpu5>;
>>> +};
>>
>> Now that they're in the same file, this can just go into the node.
>>
>
> I'll correct these mistakes in next version.
>

No need for a v4, I already have it queued.

Regards,
Andreas

--
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer
HRB 36809 (AG Nürnberg)

\
 
 \ /
  Last update: 2019-11-15 16:30    [W:0.094 / U:9.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site