lkml.org 
[lkml]   [2019]   [Nov]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/2] spi: dt-bindings: spi-controller: add wakeup-source and interrupts
On Thu, Nov 14, 2019 at 5:09 PM Dmitry Torokhov
<dmitry.torokhov@gmail.com> wrote:
>
> On Thu, Nov 14, 2019 at 2:26 PM Rob Herring <robh@kernel.org> wrote:
> >
> > On Tue, Nov 12, 2019 at 11:36:53AM -0800, Dmitry Torokhov wrote:
> > > On Tue, Nov 12, 2019 at 07:15:47PM +0000, Mark Brown wrote:
> > > > On Tue, Nov 12, 2019 at 11:03:28AM -0800, Dmitry Torokhov wrote:
> > > > > On Tue, Nov 12, 2019 at 12:03:07PM +0000, Mark Brown wrote:
> > > > > > On Mon, Nov 11, 2019 at 09:54:10PM -0800, Dmitry Torokhov wrote:
> > > >
> > > > > > > + interrupts:
> > > > > > > + items:
> > > > > > > + - description: main interrupt (attention) line.
> > > > > > > + - description: dedicated wakeup interrupt.
> > > > > > > + minItems: 1 # The wakeup interrupt is optional.
> > > >
> > > > > > > + interrupt-names:
> > > > > > > + items:
> > > > > > > + - const: irq
> > > > > > > + - const: wakeup
> > > > > > > + minItems: 1
> > > >
> > > > > > How will this interact with a SPI device that defines interrupts at the
> > > > > > device level, possibly more than one of them? Especially if the device
> > > > > > has its own idea what the interrupts should be called.
> > > >
> > > > > My understanding that individual drivers should be able to override
> > > > > whatever the default behavior core has configured, and the device can
> > > > > establish their own mapping. We have this in I2C and I believe this
> > > > > works well.
> > > >
> > > > > Is the concern about the device tree scheme or SPI core handling?
> > > >
> > > > Both really.
> > >
> > > So as I mentioned, the driver is not forced to use the interrupt
> > > supplied by the SPI core, and the worst thing is that the core
> > > configures the main IRQ as wakeirq and driver would need to call
> > > dev_pm_clear_wake_irq() before switching to correct one. I expect there
> > > will be just a few drivers needing that and many more would benefit from
> > > the default behavior and not needing to repeat the same boilerplate
> > > code.
> > >
> > > As far as scheme goes - I hope that Rob could confirm that we can
> > > override number of interrupts and names in consumers of the binding, as
> > > needed.
> >
> > This won't work. A device schema doesn't override what's defined here,
> > but just further constrains this schema.
> >
> > You could define a "spi irq" schema which devices can include if they
> > want to, but I don't think this pattern is that common to SPI devices.
> > There's not any spec behind compared to say alert irq for SMBus.
> >
> > The 'wakeup' irq name is standardized (for DT), but that's not SPI
> > specific. About all we could define there is 'wakeup-source' is boolean
> > and if there is more than one interrupt, one should be named 'wakeup'.
>
> OK, so what I am hearing is "interrupt"/"interrupt-names" properties
> should be defined in individual device's bindings, and wakeup-source
> can stay in spi-controller.yaml, right?

It could, but it's not SPI specific. I think we should convert
bindings/power/wakeup-source.txt instead. Something like this:

select: true

properties:
wakeup-source:
type: boolean
description: ...

if:
properties:
interrupt-names:
contains:
const: wakeup
required:
- interrupt-names
then:
required:
- wakeup-source

dependencies:
wakeup-source: [ interrupts ]


Rob

> And as far as SPI core goes, we can still do what I proposed, because
> we already handle "first" interrupt as the default one and the drivers
> can override as needed anyway...
>
> Thanks.
>
> --
> Dmitry

\
 
 \ /
  Last update: 2019-11-15 14:52    [W:0.239 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site