lkml.org 
[lkml]   [2019]   [Nov]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next] bonding: symmetric ICMP transmit
Date
A bonding with layer2+3 or layer3+4 hashing uses the IP addresses and the ports
to balance packets between slaves. With some network errors, we receive an ICMP
error packet by the remote host or a router. If sent by a router, the source IP
can differ from the remote host one. Additionally the ICMP protocol has no port
numbers, so a layer3+4 bonding will get a different hash than the previous one.
These two conditions could let the packet go through a different interface than
the other packets of the same flow:

# tcpdump -qltnni veth0 |sed 's/^/0: /' &
# tcpdump -qltnni veth1 |sed 's/^/1: /' &
# hping3 -2 192.168.0.2 -p 9
0: IP 192.168.0.1.2251 > 192.168.0.2.9: UDP, length 0
1: IP 192.168.0.2 > 192.168.0.1: ICMP 192.168.0.2 udp port 9 unreachable, length 36
1: IP 192.168.0.1.2252 > 192.168.0.2.9: UDP, length 0
1: IP 192.168.0.2 > 192.168.0.1: ICMP 192.168.0.2 udp port 9 unreachable, length 36
1: IP 192.168.0.1.2253 > 192.168.0.2.9: UDP, length 0
1: IP 192.168.0.2 > 192.168.0.1: ICMP 192.168.0.2 udp port 9 unreachable, length 36
0: IP 192.168.0.1.2254 > 192.168.0.2.9: UDP, length 0
1: IP 192.168.0.2 > 192.168.0.1: ICMP 192.168.0.2 udp port 9 unreachable, length 36

An ICMP error packet contains the header of the packet which caused the network
error, so inspect it and match the flow against it, so we can send the ICMP via
the same interface of the previous packet in the flow.
Move the IP and port dissect code into a generic function bond_flow_ip() and if
we are dissecting an ICMP error packet, call it again with the adjusted offset.

# hping3 -2 192.168.0.2 -p 9
1: IP 192.168.0.1.1224 > 192.168.0.2.9: UDP, length 0
1: IP 192.168.0.2 > 192.168.0.1: ICMP 192.168.0.2 udp port 9 unreachable, length 36
1: IP 192.168.0.1.1225 > 192.168.0.2.9: UDP, length 0
1: IP 192.168.0.2 > 192.168.0.1: ICMP 192.168.0.2 udp port 9 unreachable, length 36
0: IP 192.168.0.1.1226 > 192.168.0.2.9: UDP, length 0
0: IP 192.168.0.2 > 192.168.0.1: ICMP 192.168.0.2 udp port 9 unreachable, length 36
0: IP 192.168.0.1.1227 > 192.168.0.2.9: UDP, length 0
0: IP 192.168.0.2 > 192.168.0.1: ICMP 192.168.0.2 udp port 9 unreachable, length 36

Signed-off-by: Matteo Croce <mcroce@redhat.com>
---
drivers/net/bonding/bond_main.c | 83 ++++++++++++++++++++++-----------
1 file changed, 57 insertions(+), 26 deletions(-)

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 08b2b0d855af..fcb7c2f7f001 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -41,6 +41,8 @@
#include <linux/in.h>
#include <net/ip.h>
#include <linux/ip.h>
+#include <linux/icmp.h>
+#include <linux/icmpv6.h>
#include <linux/tcp.h>
#include <linux/udp.h>
#include <linux/slab.h>
@@ -3297,12 +3299,42 @@ static inline u32 bond_eth_hash(struct sk_buff *skb)
return 0;
}

+static bool bond_flow_ip(struct sk_buff *skb, struct flow_keys *fk,
+ int *noff, int *proto, bool l34)
+{
+ const struct ipv6hdr *iph6;
+ const struct iphdr *iph;
+
+ if (skb->protocol == htons(ETH_P_IP)) {
+ if (unlikely(!pskb_may_pull(skb, *noff + sizeof(*iph))))
+ return false;
+ iph = (const struct iphdr *)(skb->data + *noff);
+ iph_to_flow_copy_v4addrs(fk, iph);
+ *noff += iph->ihl << 2;
+ if (!ip_is_fragment(iph))
+ *proto = iph->protocol;
+ } else if (skb->protocol == htons(ETH_P_IPV6)) {
+ if (unlikely(!pskb_may_pull(skb, *noff + sizeof(*iph6))))
+ return false;
+ iph6 = (const struct ipv6hdr *)(skb->data + *noff);
+ iph_to_flow_copy_v6addrs(fk, iph6);
+ *noff += sizeof(*iph6);
+ *proto = iph6->nexthdr;
+ } else {
+ return false;
+ }
+
+ if (l34 && *proto >= 0)
+ fk->ports.ports = skb_flow_get_ports(skb, *noff, *proto);
+
+ return true;
+}
+
/* Extract the appropriate headers based on bond's xmit policy */
static bool bond_flow_dissect(struct bonding *bond, struct sk_buff *skb,
struct flow_keys *fk)
{
- const struct ipv6hdr *iph6;
- const struct iphdr *iph;
+ bool l34 = bond->params.xmit_policy == BOND_XMIT_POLICY_LAYER34;
int noff, proto = -1;

if (bond->params.xmit_policy > BOND_XMIT_POLICY_LAYER23) {
@@ -3314,31 +3346,30 @@ static bool bond_flow_dissect(struct bonding *bond, struct sk_buff *skb,
fk->ports.ports = 0;
memset(&fk->icmp, 0, sizeof(fk->icmp));
noff = skb_network_offset(skb);
- if (skb->protocol == htons(ETH_P_IP)) {
- if (unlikely(!pskb_may_pull(skb, noff + sizeof(*iph))))
- return false;
- iph = ip_hdr(skb);
- iph_to_flow_copy_v4addrs(fk, iph);
- noff += iph->ihl << 2;
- if (!ip_is_fragment(iph))
- proto = iph->protocol;
- } else if (skb->protocol == htons(ETH_P_IPV6)) {
- if (unlikely(!pskb_may_pull(skb, noff + sizeof(*iph6))))
- return false;
- iph6 = ipv6_hdr(skb);
- iph_to_flow_copy_v6addrs(fk, iph6);
- noff += sizeof(*iph6);
- proto = iph6->nexthdr;
- } else {
+ if (!bond_flow_ip(skb, fk, &noff, &proto, l34))
return false;
- }
- if (bond->params.xmit_policy == BOND_XMIT_POLICY_LAYER34 && proto >= 0) {
- if (proto == IPPROTO_ICMP || proto == IPPROTO_ICMPV6)
- skb_flow_get_icmp_tci(skb, &fk->icmp, skb->data,
- skb_transport_offset(skb),
- skb_headlen(skb));
- else
- fk->ports.ports = skb_flow_get_ports(skb, noff, proto);
+
+ /* ICMP error packets contains at least 8 bytes of the header
+ * of the packet which generated the error. Use this information
+ * to correlate ICMP error packets within the same flow which
+ * generated the error.
+ */
+ if (proto == IPPROTO_ICMP || proto == IPPROTO_ICMPV6) {
+ skb_flow_get_icmp_tci(skb, &fk->icmp, skb->data,
+ skb_transport_offset(skb),
+ skb_headlen(skb));
+ if (proto == IPPROTO_ICMP) {
+ if (!icmp_is_err(fk->icmp.type))
+ return true;
+
+ noff += sizeof(struct icmphdr);
+ } else if (proto == IPPROTO_ICMPV6) {
+ if (!icmpv6_is_err(fk->icmp.type))
+ return true;
+
+ noff += sizeof(struct icmp6hdr);
+ }
+ return bond_flow_ip(skb, fk, &noff, &proto, l34);
}

return true;
--
2.23.0
\
 
 \ /
  Last update: 2019-11-15 12:11    [W:0.035 / U:4.244 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site