lkml.org 
[lkml]   [2019]   [Nov]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 0/4] Update sdmmc nodes for STM32MP1
From
Date
Hi Yann

On 11/6/19 11:09 AM, Yann Gautier wrote:
> The STM32MP1 SoC embeds 3 instances of the SDMMC internal peripheral.
> The sdmmc2 and sdmmc3 nodes are added in the SoC DT file, as well as
> the required pins configuration.
> The boards DT files are also updated:
> - An eMMC is connected on SDMMC2 on STM32MP157C-ED1 and EV1 boards
> - SDMMC3 can be used on the GPIO expansion pins on EV1 and DK1/DK2
> boards.
>
> Yann Gautier (4):
> ARM: dts: stm32: update slew-rate properties for sdmmc1 on stm32mp157
> ARM: dts: stm32: add sdmmc2 & 3 nodes for STM32MP157 SoC
> ARM: dts: stm32: enable sdmmc2 node for stm32mp157c-ed1 board
> ARM: dts: stm32: add sdmmc3 node for STM32MP1 boards
>
> arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 200 +++++++++++++++++++++-
> arch/arm/boot/dts/stm32mp157a-dk1.dts | 12 ++
> arch/arm/boot/dts/stm32mp157c-ed1.dts | 16 ++
> arch/arm/boot/dts/stm32mp157c-ev1.dts | 12 ++
> arch/arm/boot/dts/stm32mp157c.dtsi | 33 +++-
> 5 files changed, 263 insertions(+), 10 deletions(-)
>

Series applied on stm32-next.

Regards
Alex

\
 
 \ /
  Last update: 2019-11-15 11:50    [W:0.074 / U:0.680 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site