lkml.org 
[lkml]   [2019]   [Nov]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ARM: dts: imx25: fix usbhost1 node
On Thu, Nov 14, 2019 at 10:17:08PM +0100, Uwe Kleine-König wrote:
> On Mon, Nov 11, 2019 at 12:46:56PM +0100, Michael Grzeschik wrote:
> > The usb port represented by &usbhost1 uses an USB phy internal to the
> > SoC. We add the phy_type to the base dtsi so the board dts only have to
> > overwrite it if they use a different configuration. While at it we also
> > pin the usbhost port to host mode.
> >
> > Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

Thanks for the ACK.

I just figured out that we also can add the limitation
to maximum-speed = "full-speed" into to dts. Since the
internal phy maximum speed is limited to that.

I will send an v2.

--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2019-11-15 09:28    [W:0.106 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site