lkml.org 
[lkml]   [2019]   [Nov]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[for-next][PATCH 12/33] ftrace/x86: Add register_ftrace_direct() for custom trampolines
From: "Steven Rostedt (VMware)" <rostedt@goodmis.org>

Enable x86 to allow for register_ftrace_direct(), where a custom trampoline
may be called directly from an ftrace mcount/fentry location.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
---
arch/x86/Kconfig | 1 +
arch/x86/include/asm/ftrace.h | 13 +++++++++++++
arch/x86/kernel/ftrace.c | 12 ++++++++++++
arch/x86/kernel/ftrace_64.S | 34 +++++++++++++++++++++++++++-------
include/linux/ftrace.h | 6 ++++++
5 files changed, 59 insertions(+), 7 deletions(-)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index d6e1faa28c58..329d9c729ba3 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -158,6 +158,7 @@ config X86
select HAVE_DMA_CONTIGUOUS
select HAVE_DYNAMIC_FTRACE
select HAVE_DYNAMIC_FTRACE_WITH_REGS
+ select HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
select HAVE_EBPF_JIT
select HAVE_EFFICIENT_UNALIGNED_ACCESS
select HAVE_EISA
diff --git a/arch/x86/include/asm/ftrace.h b/arch/x86/include/asm/ftrace.h
index c38a66661576..c2a7458f912c 100644
--- a/arch/x86/include/asm/ftrace.h
+++ b/arch/x86/include/asm/ftrace.h
@@ -28,6 +28,19 @@ static inline unsigned long ftrace_call_adjust(unsigned long addr)
return addr;
}

+/*
+ * When a ftrace registered caller is tracing a function that is
+ * also set by a register_ftrace_direct() call, it needs to be
+ * differentiated in the ftrace_caller trampoline. To do this, we
+ * place the direct caller in the ORIG_AX part of pt_regs. This
+ * tells the ftrace_caller that there's a direct caller.
+ */
+static inline void arch_ftrace_set_direct_caller(struct pt_regs *regs, unsigned long addr)
+{
+ /* Emulate a call */
+ regs->orig_ax = addr;
+}
+
#ifdef CONFIG_DYNAMIC_FTRACE

struct dyn_arch_ftrace {
diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c
index 024c3053dbba..fef283f6341d 100644
--- a/arch/x86/kernel/ftrace.c
+++ b/arch/x86/kernel/ftrace.c
@@ -1042,6 +1042,18 @@ void prepare_ftrace_return(unsigned long self_addr, unsigned long *parent,
if (unlikely(atomic_read(&current->tracing_graph_pause)))
return;

+ /*
+ * If the return location is actually pointing directly to
+ * the start of a direct trampoline (if we trace the trampoline
+ * it will still be offset by MCOUNT_INSN_SIZE), then the
+ * return address is actually off by one word, and we
+ * need to adjust for that.
+ */
+ if (ftrace_find_direct_func(self_addr + MCOUNT_INSN_SIZE)) {
+ self_addr = *parent;
+ parent++;
+ }
+
/*
* Protect against fault, even if it shouldn't
* happen. This tool is too much intrusive to
diff --git a/arch/x86/kernel/ftrace_64.S b/arch/x86/kernel/ftrace_64.S
index 809d54397dba..6ac7ff304886 100644
--- a/arch/x86/kernel/ftrace_64.S
+++ b/arch/x86/kernel/ftrace_64.S
@@ -88,6 +88,7 @@ EXPORT_SYMBOL(__fentry__)
movq %rdi, RDI(%rsp)
movq %r8, R8(%rsp)
movq %r9, R9(%rsp)
+ movq $0, ORIG_RAX(%rsp)
/*
* Save the original RBP. Even though the mcount ABI does not
* require this, it helps out callers.
@@ -114,7 +115,11 @@ EXPORT_SYMBOL(__fentry__)
subq $MCOUNT_INSN_SIZE, %rdi
.endm

-.macro restore_mcount_regs
+.macro restore_mcount_regs save=0
+
+ /* ftrace_regs_caller or frame pointers require this */
+ movq RBP(%rsp), %rbp
+
movq R9(%rsp), %r9
movq R8(%rsp), %r8
movq RDI(%rsp), %rdi
@@ -123,10 +128,7 @@ EXPORT_SYMBOL(__fentry__)
movq RCX(%rsp), %rcx
movq RAX(%rsp), %rax

- /* ftrace_regs_caller can modify %rbp */
- movq RBP(%rsp), %rbp
-
- addq $MCOUNT_REG_SIZE, %rsp
+ addq $MCOUNT_REG_SIZE-\save, %rsp

.endm

@@ -228,10 +230,28 @@ GLOBAL(ftrace_regs_call)
movq R10(%rsp), %r10
movq RBX(%rsp), %rbx

- restore_mcount_regs
+ movq ORIG_RAX(%rsp), %rax
+ movq %rax, MCOUNT_REG_SIZE-8(%rsp)
+
+ /* If ORIG_RAX is anything but zero, make this a call to that */
+ movq ORIG_RAX(%rsp), %rax
+ cmpq $0, %rax
+ je 1f
+
+ /* Swap the flags with orig_rax */
+ movq MCOUNT_REG_SIZE(%rsp), %rdi
+ movq %rdi, MCOUNT_REG_SIZE-8(%rsp)
+ movq %rax, MCOUNT_REG_SIZE(%rsp)
+
+ restore_mcount_regs 8
+
+ jmp 2f
+
+1: restore_mcount_regs
+

/* Restore flags */
- popfq
+2: popfq

/*
* As this jmp to ftrace_epilogue can be a short jump
diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h
index 8b37b8105398..2bc7bd6b8387 100644
--- a/include/linux/ftrace.h
+++ b/include/linux/ftrace.h
@@ -272,6 +272,12 @@ static inline struct ftrace_direct_func *ftrace_find_direct_func(unsigned long a
* via ftrace (because there's other callbacks besides the
* direct call), can inform the architecture's trampoline that this
* routine has a direct caller, and what the caller is.
+ *
+ * For example, in x86, it returns the direct caller
+ * callback function via the regs->orig_ax parameter.
+ * Then in the ftrace trampoline, if this is set, it makes
+ * the return from the trampoline jump to the direct caller
+ * instead of going back to the function it just traced.
*/
static inline void arch_ftrace_set_direct_caller(struct pt_regs *regs,
unsigned long addr) { }
--
2.23.0

\
 
 \ /
  Last update: 2019-11-14 19:19    [W:0.082 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site