lkml.org 
[lkml]   [2019]   [Nov]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] dt-bindings: thermal: sprd: Add the Spreadtrum thermal documentation
On Fri, Nov 08, 2019 at 05:54:30PM +0800, Baolin Wang wrote:
> From: Freeman Liu <freeman.liu@unisoc.com>
>
> Add the Spreadtrum thermal documentation.
>
> Signed-off-by: Freeman Liu <freeman.liu@unisoc.com>
> Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
> ---
> .../devicetree/bindings/thermal/sprd-thermal.txt | 41 ++++++++++++++++++++
> 1 file changed, 41 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/thermal/sprd-thermal.txt

Please make this a schema. See Documentation/devicetree/writing-schema.rst

>
> diff --git a/Documentation/devicetree/bindings/thermal/sprd-thermal.txt b/Documentation/devicetree/bindings/thermal/sprd-thermal.txt
> new file mode 100644
> index 0000000..a9da7f4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/thermal/sprd-thermal.txt
> @@ -0,0 +1,41 @@
> +* Spreadtrum thermal sensor controller bindings
> +
> +Required properties:
> +- compatible : Should be "sprd,ums512-thermal"
> +- reg: Address range of the thermal registers
> +- clock-names: "enable" for thermal module enable clock.
> +- clocks: Should contain a clock specifier for each entry in clock-names.
> +- nvmem-cells: A phandle to the calibration data provided by a nvmem device.
> +- nvmem-cell-names: Should be "thm_sign_cal" and "thm_ratio_cal".
> +- #thermal-sensor-cells: Should be 1. See ./thermal.txt for a description.
> +
> +Child nodes properties:
> +- reg: Specify the sensor id.
> +- nvmem-cells: A phandle to the calibration data provided by a nvmem device.
> +- nvmem-cell-names: Should be "sen_delta_cal".
> +
> +Example:
> +
> + ap_thm0: thermal@32200000 {
> + compatible = "sprd,ums512-thermal";
> + reg = <0 0x32200000 0 0x10000>;
> + clock-names = "enable";
> + clocks = <&aonapb_gate CLK_THM0_EB>;
> + #thermal-sensor-cells = <1>;
> + nvmem-cells = <&thm0_sign>, <&thm0_ratio>;
> + nvmem-cell-names = "thm_sign_cal", "thm_ratio_cal";
> +
> + prometheus0-sensor@0{

space ^

> + reg = <0>;
> + nvmem-cells = <&thm0_sen0>;
> + nvmem-cell-names = "sen_delta_cal";
> + };
> +
> + ank1-sensor@1{

space ^

> + reg = <1>;
> + nvmem-cells = <&thm0_sen1>;
> + nvmem-cell-names = "sen_delta_cal";
> + };
> +
> + ......
> + };
> --
> 1.7.9.5
>

\
 
 \ /
  Last update: 2019-11-14 19:03    [W:0.655 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site