lkml.org 
[lkml]   [2019]   [Nov]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/1] usb: gadget: add raw-gadget interface
On Thu, Nov 14, 2019 at 4:08 PM Andrey Konovalov <andreyknvl@google.com> wrote:
>
> On Fri, Nov 8, 2019 at 10:17 PM Greg Kroah-Hartman
> <gregkh@linuxfoundation.org> wrote:
> >
> > On Fri, Nov 08, 2019 at 07:26:55PM +0100, Andrey Konovalov wrote:
> > > USB Raw Gadget is a kernel module that provides a userspace interface for
> > > the USB Gadget subsystem. Essentially it allows to emulate USB devices
> > > from userspace. Enabled with CONFIG_USB_RAW_GADGET. Raw Gadget is
> > > currently a strictly debugging feature and shouldn't be used in
> > > production.
> > >
> > > Raw Gadget is similar to GadgetFS, but provides a more low-level and
> > > direct access to the USB Gadget layer for the userspace. The key
> > > differences are:
> > >
> > > 1. Every USB request is passed to the userspace to get a response, while
> > > GadgetFS responds to some USB requests internally based on the provided
> > > descriptors. However note, that the UDC driver might respond to some
> > > requests on its own and never forward them to the Gadget layer.
> > >
> > > 2. GadgetFS performs some sanity checks on the provided USB descriptors,
> > > while Raw Gadget allows you to provide arbitrary data as responses to
> > > USB requests.
> > >
> > > 3. Raw Gadget provides a way to select a UDC device/driver to bind to,
> > > while GadgetFS currently binds to the first available UDC.
> > >
> > > 4. Raw Gadget uses predictable endpoint names (handles) across different
> > > UDCs (as long as UDCs have enough endpoints of each required transfer
> > > type).
> > >
> > > 5. Raw Gadget has ioctl-based interface instead of a filesystem-based one.
> >
> > I like the idea, and you've shown that you can do neat stuff with this,
> > so that's a good proof-of-concept.
> >
> > But, at the least, use a "real" char device node for this, not debugfs.
> > Switch this to a misc device and I'll be glad to review it.
>
> Will do in v2.
>
> >
> > Some minor nits that jump out at me other than debugfs:
> >
> > > +static void raw_event_queue_destroy(struct raw_event_queue *queue)
> > > +{
> > > + int i;
> > > +
> > > + for (i = 0; i < queue->size; i++) {
> > > + pr_debug("freeing event[%d] = %px\n", i, queue->events[i]);
> >
> > You still have a lot of debugging messages in here. Most of these can
> > be removed, as ftrace is useful instead now that you "know" the code
> > works properly.
>
> Will do in v2.
>
> >
> > > + kfree(queue->events[i]);
> > > + }
> > > + queue->size = 0;
> > > +}
> > > +
> > > +/*----------------------------------------------------------------------*/
> > > +
> > > +struct raw_dev;
> > > +
> > > +#define USB_RAW_MAX_ENDPOINTS 32
> > > +
> > > +enum ep_state {
> > > + STATE_EP_DISABLED,
> > > + STATE_EP_ENABLED,
> > > +};
> > > +
> > > +struct raw_ep {
> > > + struct raw_dev *dev;
> > > + enum ep_state state;
> > > + struct usb_ep *ep;
> > > + struct usb_request *req;
> > > + bool urb_queued;
> > > + bool disabling;
> > > + ssize_t status;
> > > +};
> > > +
> > > +enum dev_state {
> > > + STATE_DEV_INVALID = 0,
> > > + STATE_DEV_OPENED,
> > > + STATE_DEV_INITIALIZED,
> > > + STATE_DEV_RUNNING,
> > > + STATE_DEV_CLOSED,
> > > + STATE_DEV_FAILED
> > > +};
> > > +
> > > +struct raw_dev {
> > > + refcount_t count;
> >
> > Why not just use a "real" struct device?
> >
> > Or a kref at the least, no need to roll your own refcount logic here,
> > right?
>
> Will do in v2.
>
> >
> > > + spinlock_t lock;
> > > +
> > > + const char *udc_name;
> > > + struct usb_gadget_driver driver;
> > > +
> > > + /* Protected by lock: */
> > > + enum dev_state state;
> > > + bool gadget_registered;
> > > + struct usb_gadget *gadget;
> > > + struct usb_request *req;
> > > + bool ep0_in_pending;
> > > + bool ep0_out_pending;
> > > + bool ep0_urb_queued;
> > > + ssize_t ep0_status;
> > > + struct raw_ep eps[USB_RAW_MAX_ENDPOINTS];
> > > +
> > > + struct completion ep0_done;
> > > + struct raw_event_queue queue;
> > > +};
> > > +
> > > +static struct raw_dev *dev_new(void)
> > > +{
> > > + struct raw_dev *dev;
> > > +
> > > + dev = kzalloc(sizeof(*dev), GFP_KERNEL);
> > > + if (!dev)
> > > + return NULL;
> > > + refcount_set(&dev->count, 1); /* Matches dev_put() in raw_release(). */
> > > + spin_lock_init(&dev->lock);
> > > + init_completion(&dev->ep0_done);
> > > + raw_event_queue_init(&dev->queue);
> > > + pr_debug("device created\n");
> > > + return dev;
> > > +}
> > > +
> > > +static inline void dev_get(struct raw_dev *dev)
> > > +{
> > > + refcount_inc(&dev->count);
> > > +}
> > > +
> > > +static void dev_put(struct raw_dev *dev)
> > > +{
> > > + int i;
> > > +
> > > + if (likely(!refcount_dec_and_test(&dev->count)))
> > > + return;
> >
> > unless you can measure it, don't use likely/unlikely as the compiler and
> > cpu can almost always get it right instead.
>
> Will do in v2.
>
> >
> > > + kfree(dev->udc_name);
> > > + kfree(dev->driver.udc_name);
> > > + if (dev->req) {
> > > + if (dev->ep0_urb_queued)
> > > + usb_ep_dequeue(dev->gadget->ep0, dev->req);
> > > + usb_ep_free_request(dev->gadget->ep0, dev->req);
> > > + }
> > > + raw_event_queue_destroy(&dev->queue);
> > > + for (i = 0; i < USB_RAW_MAX_ENDPOINTS; i++) {
> > > + if (dev->eps[i].state != STATE_EP_ENABLED)
> > > + continue;
> > > + usb_ep_disable(dev->eps[i].ep);
> > > + usb_ep_free_request(dev->eps[i].ep, dev->eps[i].req);
> > > + kfree(dev->eps[i].ep->desc);
> > > + dev->eps[i].state = STATE_EP_DISABLED;
> > > + }
> > > + kfree(dev);
> > > + pr_debug("device freed\n");
> >
> > ftrace :)
> >
> > > +static void gadget_unbind(struct usb_gadget *gadget)
> > > +{
> > > + struct raw_dev *dev = get_gadget_data(gadget);
> > > + unsigned long flags;
> > > +
> > > + if (WARN_ON(!dev))
> > > + return;
> >
> > Why warn? How can this happen?
>
> This shouldn't happen and I initially had BUG_ON there, but checkpatch
> complained. I can use BUG_ON of leave it as WARN_ON, which would you
> prefer?
>
> >
> > > + spin_lock_irqsave(&dev->lock, flags);
> > > + set_gadget_data(gadget, NULL);
> > > + spin_unlock_irqrestore(&dev->lock, flags);
> > > + dev_put(dev); /* Matches dev_get() in gadget_bind(). */
> > > + pr_debug("unbound\n");
> > > +}
> > > +
> > > +static int gadget_setup(struct usb_gadget *gadget,
> > > + const struct usb_ctrlrequest *ctrl)
> > > +{
> > > + int ret = 0;
> > > + struct raw_dev *dev = get_gadget_data(gadget);
> > > + unsigned long flags;
> > > +
> > > + pr_debug("bRequestType: 0x%x (%s), bRequest: 0x%x,\n"
> > > + " wValue: 0x%x, wIndex: 0x%x, wLength: %d\n",
> > > + ctrl->bRequestType,
> > > + (ctrl->bRequestType & USB_DIR_IN) ? "IN" : "OUT",
> > > + ctrl->bRequest, ctrl->wValue, ctrl->wIndex, ctrl->wLength);
> > > +
> > > + if (WARN_ON(!dev))
> > > + return -ENODEV;
> >
> > Same here.
> >
> > > + spin_lock_irqsave(&dev->lock, flags);
> > > + if (dev->state != STATE_DEV_RUNNING) {
> > > + pr_err("ignoring, device is not running\n");
> > > + ret = -ENODEV;
> > > + goto out_unlock;
> > > + }
> > > + pr_debug("in_pending: %d, out_pending: %d\n",
> > > + dev->ep0_in_pending, dev->ep0_out_pending);
> > > + if (dev->ep0_in_pending || dev->ep0_out_pending) {
> > > + pr_debug("stalling, already have pending request\n");
> > > + ret = -EBUSY;
> > > + goto out_unlock;
> > > + }
> > > + if ((ctrl->bRequestType & USB_DIR_IN) && ctrl->wLength) {
> > > + pr_debug("ep0_in_pending <= true\n");
> > > + dev->ep0_in_pending = true;
> > > + } else {
> > > + pr_debug("ep0_out_pending <= true\n");
> > > + dev->ep0_out_pending = true;
> > > + }
> > > + spin_unlock_irqrestore(&dev->lock, flags);
> > > +
> > > + ret = raw_queue_event(dev, USB_RAW_EVENT_CONTROL, sizeof(*ctrl), ctrl);
> > > + if (ret < 0)
> > > + pr_err("failed to queue event\n");
> > > + pr_debug("event queued\n");
> > > + goto out;
> > > +
> > > +out_unlock:
> > > + spin_unlock_irqrestore(&dev->lock, flags);
> > > +out:
> > > + return ret;
> > > +}
> > > +
> > > +static void gadget_disconnect(struct usb_gadget *gadget)
> > > +{
> > > + pr_debug("ignoring\n");
> > > +}
> > > +
> > > +static void gadget_suspend(struct usb_gadget *gadget)
> > > +{
> > > + pr_debug("ignoring\n");
> > > +}
> > > +
> > > +static void gadget_resume(struct usb_gadget *gadget)
> > > +{
> > > + pr_debug("ignoring\n");
> > > +}
> > > +
> > > +static void gadget_reset(struct usb_gadget *gadget)
> > > +{
> > > + pr_debug("ignoring\n");
> > > +}
> >
> > I think you don't even need functions for these, right? If not, just
> > remove. If you do, we should fix the gadget core to not require them :)
>
> Will do in v2.

Actually, I just hit that Dummy HCD/UDC requires a disconnect callback
to be present. And I assume other UDCs might do the same, so I'd
rather include the callbacks just in case. WDYT?

>
> >
> > > +
> > > +/*----------------------------------------------------------------------*/
> > > +
> > > +static int raw_open(struct inode *inode, struct file *fd)
> > > +{
> > > + struct raw_dev *dev;
> > > +
> > > + dev = dev_new();
> > > + if (!dev) {
> > > + pr_err("failed to created device");
> >
> > So many error messages printed on failures, you only needed the original
> > one if memory was gone that the core sent out.
>
> What do you mean by the original one? I see only one error printed in
> case dev_new() fails. However I'm not sure if there's much value in
> printing an error in case the kernel ran out of memory, as it doesn't
> handle this very well anyway AFAIK. Should I remove this pr_err?
>
> >
> > > + return -ENOMEM;
> > > + }
> > > + fd->private_data = dev;
> > > + dev->state = STATE_DEV_OPENED;
> > > + pr_debug("device opened");
> > > + return 0;
> > > +}
> > > +
> > > +static int raw_release(struct inode *inode, struct file *fd)
> > > +{
> > > + int ret = 0;
> > > + struct raw_dev *dev = fd->private_data;
> > > + unsigned long flags;
> > > + bool unregister = false;
> > > +
> > > + if (!dev)
> > > + return -EBUSY;
> >
> > How can that happen?
>
> It shouldn't, will switch to WARN_ON/BUG_ON.
>
> >
> > > +
> > > + spin_lock_irqsave(&dev->lock, flags);
> > > + dev->state = STATE_DEV_CLOSED;
> > > + pr_debug("device is closed\n");
> > > + if (!dev->gadget) {
> > > + spin_unlock_irqrestore(&dev->lock, flags);
> > > + goto out_put;
> > > + }
> > > + if (dev->gadget_registered)
> > > + unregister = true;
> > > + dev->gadget_registered = false;
> > > + spin_unlock_irqrestore(&dev->lock, flags);
> > > +
> > > + if (unregister) {
> > > + ret = usb_gadget_unregister_driver(&dev->driver);
> > > + WARN_ON(ret != 0);
> > > + dev_put(dev); /* Matches dev_get() in raw_ioctl_run(). */
> > > + }
> > > +
> > > +out_put:
> > > + dev_put(dev); /* Matches dev_new() in raw_open(). */
> > > + pr_debug("device released");
> > > + return ret;
> > > +}
> > > +
> > > +/*----------------------------------------------------------------------*/
> > > +
> > > +#define UDC_NAME_LENGTH_MAX 128
> > > +
> > > +static int raw_ioctl_init(struct raw_dev *dev, unsigned long value)
> > > +{
> > > + int ret = 0;
> > > + struct usb_raw_init arg;
> > > + char *udc_driver_name;
> > > + char *udc_device_name;
> > > + unsigned long flags;
> > > +
> > > + ret = copy_from_user(&arg, (void __user *)value, sizeof(arg));
> > > + if (ret)
> > > + return ret;
> > > +
> > > + switch (arg.speed) {
> > > + case USB_SPEED_LOW:
> > > + case USB_SPEED_FULL:
> > > + case USB_SPEED_HIGH:
> > > + case USB_SPEED_SUPER:
> > > + break;
> > > + default:
> > > + arg.speed = USB_SPEED_HIGH;
> > > + }
> > > +
> > > + udc_driver_name = kmalloc(UDC_NAME_LENGTH_MAX, GFP_KERNEL);
> > > + if (!udc_driver_name)
> > > + return -ENOMEM;
> > > + ret = strncpy_from_user(udc_driver_name, arg.driver_name,
> > > + UDC_NAME_LENGTH_MAX);
> > > + if (ret < 0) {
> > > + kfree(udc_driver_name);
> > > + return ret;
> > > + }
> > > + ret = 0;
> > > + pr_debug("udc_driver_name: %s\n", udc_driver_name);
> > > +
> > > + udc_device_name = kmalloc(UDC_NAME_LENGTH_MAX, GFP_KERNEL);
> > > + if (!udc_device_name) {
> > > + kfree(udc_driver_name);
> > > + return -ENOMEM;
> > > + }
> > > + ret = strncpy_from_user(udc_device_name, arg.device_name,
> > > + UDC_NAME_LENGTH_MAX);
> >
> > You are burying the max size of names in the .c code, put it in the .h
> > to give userspace a chance.
>
> Will do in v2.
>
> >
> > > +static bool check_ep_caps(struct usb_ep *ep,
> > > + struct usb_endpoint_descriptor *desc)
> > > +{
> > > + switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
> > > + case USB_ENDPOINT_XFER_ISOC:
> >
> > We have functions/macros for endpoint types, right? Can't you use them
> > here?
>
> Will do in v2.
>
> >
> > > + if (!ep->caps.type_iso)
> > > + return false;
> > > + break;
> > > + case USB_ENDPOINT_XFER_BULK:
> > > + if (!ep->caps.type_bulk)
> > > + return false;
> > > + break;
> > > + case USB_ENDPOINT_XFER_INT:
> > > + if (!ep->caps.type_int)
> > > + return false;
> > > + break;
> > > + default:
> > > + return false;
> > > + }
> > > +
> > > + switch (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) {
> > > + case USB_DIR_IN:
> >
> > Same here, we have macros for this.
>
> Will do in v2.
>
> >
> > > +static int __init raw_init(void)
> > > +{
> > > + raw_file = debugfs_create_file("raw-gadget", 0600,
> > > + usb_debug_root, NULL, &raw_ops);
> > > + if (!raw_file) {
> >
> > this return value will never be NULL no matter what. So you just tested
> > for an impossiblity :)
> >
> > In the future, there's never a new to check any return value for any
> > debugfs calls, it's not an issue.
> >
> > > + pr_err("failed to create raw-gadget in debugfs\n");
> > > + return -ENOMEM;
> > > + }
> > > + return 0;
> > > +}
> > > +
> > > +static void __exit raw_exit(void)
> > > +{
> > > + if (!raw_file)
> > > + return;
> >
> > No need to check:
> >
> > > + debugfs_remove(raw_file);
> >
> > that call can take NULL
> >
> > > + raw_file = NULL;
> >
> > No need for this :)
> >
> > > +/*
> > > + * struct usb_raw_init - argument for USB_RAW_IOCTL_INIT ioctl.
> > > + * @speed: The speed of the emulated USB device, takes the same values as
> > > + * the usb_device_speed enum: USB_SPEED_FULL, USB_SPEED_HIGH, etc.
> > > + * @driver_name: The name of the UDC driver.
> > > + * @device_name: The name of a UDC instance.
> > > + *
> > > + * The last two fields identify a UDC the gadget driver should bind to.
> > > + * For example, Dummy UDC has "dummy_udc" as its driver_name and "dummy_udc.N"
> > > + * as its device_name, where N in the index of the Dummy UDC instance.
> > > + * At the same time the dwc2 driver that is used on Raspberry Pi Zero, has
> > > + * "20980000.usb" as both driver_name and device_name.
> > > + */
> > > +struct usb_raw_init {
> > > + uint64_t speed;
> > > + const char *driver_name;
> > > + const char *device_name;
> >
> > If you have structures crossing the user/kernel boundry, always use the
> > correct data types. Those start with "__". So this would be __u32 and
> > __u8 * instead.
>
> Will do in v2, here and below.
>
> >
> > > +};
> > > +
> > > +/* The type of event fetched with the USB_RAW_IOCTL_EVENT_FETCH ioctl. */
> > > +enum usb_raw_event_type {
> > > + USB_RAW_EVENT_INVALID,
> > > +
> > > + /* This event is queued when the driver has bound to a UDC. */
> > > + USB_RAW_EVENT_CONNECT,
> > > +
> > > + /* This event is queued when a new control request arrived to ep0. */
> > > + USB_RAW_EVENT_CONTROL,
> > > +
> > > + /* The list might grow in the future. */
> > > +};
> > > +
> > > +/*
> > > + * struct usb_raw_event - argument for USB_RAW_IOCTL_EVENT_FETCH ioctl.
> > > + * @type: The type of the fetched event.
> > > + * @length: Length of the data buffer. Updated by the driver and set to the
> > > + * actual length of the fetched event data.
> > > + * @data: A buffer to store the fetched event data.
> > > + *
> > > + * Currently the fetched data buffer is empty for USB_RAW_EVENT_CONNECT,
> > > + * and contains struct usb_ctrlrequest for USB_RAW_EVENT_CONTROL.
> > > + */
> > > +struct usb_raw_event {
> > > + uint32_t type;
> > > + uint32_t length;
> > > + char data[0];
> >
> > __u32 please.
> >
> > > +};
> > > +
> > > +#define USB_RAW_IO_FLAGS_ZERO 0x0001
> > > +#define USB_RAW_IO_FLAGS_MASK 0x0001
> > > +
> > > +static int usb_raw_io_flags_valid(uint16_t flags)
> > > +{
> > > + return (flags & ~USB_RAW_IO_FLAGS_MASK) == 0;
> > > +}
> > > +
> > > +static int usb_raw_io_flags_zero(uint16_t flags)
> > > +{
> > > + return (flags & USB_RAW_IO_FLAGS_ZERO);
> > > +}
> > > +
> > > +/*
> > > + * struct usb_raw_ep_io - argument for USB_RAW_IOCTL_EP0/EP_WRITE/READ ioctls.
> > > + * @ep: Endpoint handle as returned by USB_RAW_IOCTL_EP_ENABLE for
> > > + * USB_RAW_IOCTL_EP_WRITE/READ. Ignored for USB_RAW_IOCTL_EP0_WRITE/READ.
> > > + * @flags: When USB_RAW_IO_FLAGS_ZERO is specified, the zero flag is set on
> > > + * the submitted USB request, see include/linux/usb/gadget.h for details.
> > > + * @length: Length of data.
> > > + * @data: Data to send for USB_RAW_IOCTL_EP0/EP_WRITE. Buffer to store received
> > > + * data for USB_RAW_IOCTL_EP0/EP_READ.
> > > + */
> > > +struct usb_raw_ep_io {
> > > + uint16_t ep;
> > > + uint16_t flags;
> >
> > __u16
> >
> > > + uint32_t length;
> > > + char data[0];
> > > +};
> > > +
> > > +/*
> > > + * Initializes a Raw Gadget instance.
> > > + * Accepts a pointer to the usb_raw_init struct as an argument.
> > > + * Returns 0 on success or negative error code on failure.
> > > + */
> > > +#define USB_RAW_IOCTL_INIT _IOW('U', 0, struct usb_raw_init)
> > > +
> > > +/*
> > > + * Instructs Raw Gadget to bind to a UDC and start emulating a USB device.
> > > + * Returns 0 on success or negative error code on failure.
> > > + */
> > > +#define USB_RAW_IOCTL_RUN _IO('U', 1)
> > > +
> > > +/*
> > > + * A blocking ioctl that waits for an event and returns fetched event data to
> > > + * the user.
> > > + * Accepts a pointer to the usb_raw_event struct.
> > > + * Returns 0 on success or negative error code on failure.
> > > + */
> > > +#define USB_RAW_IOCTL_EVENT_FETCH _IOR('U', 2, struct usb_raw_event)
> > > +
> > > +/*
> > > + * Queues an IN (OUT for READ) urb as a response to the last control request
> > > + * received on endpoint 0, provided that was an IN (OUT for READ) request and
> > > + * waits until the urb is completed. Copies received data to user for READ.
> > > + * Accepts a pointer to the usb_raw_ep_io struct as an argument.
> > > + * Returns length of trasferred data on success or negative error code on
> > > + * failure.
> > > + */
> > > +#define USB_RAW_IOCTL_EP0_WRITE _IOW('U', 3, struct usb_raw_ep_io)
> > > +#define USB_RAW_IOCTL_EP0_READ _IOWR('U', 4, struct usb_raw_ep_io)
> > > +
> > > +/*
> > > + * Finds an endpoint that supports the transfer type specified in the
> > > + * descriptor and enables it.
> > > + * Accepts a pointer to the usb_endpoint_descriptor struct as an argument.
> > > + * Returns enabled endpoint handle on success or negative error code on failure.
> > > + */
> > > +#define USB_RAW_IOCTL_EP_ENABLE _IOW('U', 5, struct usb_endpoint_descriptor)
> > > +
> > > +/* Disables specified endpoint.
> > > + * Accepts endpoint handle as an argument.
> > > + * Returns 0 on success or negative error code on failure.
> > > + */
> > > +#define USB_RAW_IOCTL_EP_DISABLE _IOW('U', 6, int)
> >
> > __u32, right?
> >
> >
> > > +
> > > +/*
> > > + * Queues an IN (OUT for READ) urb as a response to the last control request
> > > + * received on endpoint usb_raw_ep_io.ep, provided that was an IN (OUT for READ)
> > > + * request and waits until the urb is completed. Copies received data to user
> > > + * for READ.
> > > + * Accepts a pointer to the usb_raw_ep_io struct as an argument.
> > > + * Returns length of trasferred data on success or negative error code on
> > > + * failure.
> > > + */
> > > +#define USB_RAW_IOCTL_EP_WRITE _IOW('U', 7, struct usb_raw_ep_io)
> > > +#define USB_RAW_IOCTL_EP_READ _IOWR('U', 8, struct usb_raw_ep_io)
> > > +
> > > +/*
> > > + * Switches the gadget into the configured state.
> > > + * Returns 0 on success or negative error code on failure.
> > > + */
> > > +#define USB_RAW_IOCTL_CONFIGURE _IO('U', 9)
> > > +
> > > +/*
> > > + * Constrains UDC VBUS power usage.
> > > + * Accepts current limit in 2 mA units as an argument.
> > > + * Returns 0 on success or negative error code on failure.
> > > + */
> > > +#define USB_RAW_IOCTL_VBUS_DRAW _IOW('U', 10, uint32_t)
> >
> > __u32
> >
> > thanks,
> >
> > greg k-h
>
> Thanks!

\
 
 \ /
  Last update: 2019-11-14 16:34    [W:2.042 / U:0.696 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site