lkml.org 
[lkml]   [2019]   [Nov]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 1/2] PCI: pciehp: Do not disable interrupt twice on suspend
On Tue, Oct 29, 2019 at 08:00:21PM +0300, Mika Westerberg wrote:
> We try to keep PCIe hotplug ports runtime suspended when entering system
> suspend. Due to the fact that the PCIe portdrv sets NEVER_SKIP driver PM
> flag the PM core always calls system suspend/resume hooks even if the
> device is left runtime suspended. Since PCIe hotplug driver re-uses the
> same function for both it ends up disabling hotplug interrupt twice and
> the second time following is printed:
>
> pciehp 0000:03:01.0:pcie204: pcie_do_write_cmd: no response from device
>
> Prevent this from happening by checking whether the device is already
> runtime suspended when system suspend hook is called.
>
> Fixes: 9c62f0bfb832 ("PCI: pciehp: Implement runtime PM callbacks")
> Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
> Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Applied both to pci/hotplug for v5.5, thanks!

If it's convenient for you, a cover letter on multi-patch series would
make a good place for responses like this that apply to the whole
series.

> ---
> No changes from previous version.
>
> drivers/pci/hotplug/pciehp_core.c | 25 +++++++++++++++++++++++--
> 1 file changed, 23 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
> index b3122c151b80..56daad828c9e 100644
> --- a/drivers/pci/hotplug/pciehp_core.c
> +++ b/drivers/pci/hotplug/pciehp_core.c
> @@ -253,7 +253,7 @@ static bool pme_is_native(struct pcie_device *dev)
> return pcie_ports_native || host->native_pme;
> }
>
> -static int pciehp_suspend(struct pcie_device *dev)
> +static void pciehp_disable_interrupt(struct pcie_device *dev)
> {
> /*
> * Disable hotplug interrupt so that it does not trigger
> @@ -261,7 +261,19 @@ static int pciehp_suspend(struct pcie_device *dev)
> */
> if (pme_is_native(dev))
> pcie_disable_interrupt(get_service_data(dev));
> +}
>
> +#ifdef CONFIG_PM_SLEEP
> +static int pciehp_suspend(struct pcie_device *dev)
> +{
> + /*
> + * If the port is already runtime suspended we can keep it that
> + * way.
> + */
> + if (dev_pm_smart_suspend_and_suspended(&dev->port->dev))
> + return 0;
> +
> + pciehp_disable_interrupt(dev);
> return 0;
> }
>
> @@ -279,6 +291,7 @@ static int pciehp_resume_noirq(struct pcie_device *dev)
>
> return 0;
> }
> +#endif
>
> static int pciehp_resume(struct pcie_device *dev)
> {
> @@ -292,6 +305,12 @@ static int pciehp_resume(struct pcie_device *dev)
> return 0;
> }
>
> +static int pciehp_runtime_suspend(struct pcie_device *dev)
> +{
> + pciehp_disable_interrupt(dev);
> + return 0;
> +}
> +
> static int pciehp_runtime_resume(struct pcie_device *dev)
> {
> struct controller *ctrl = get_service_data(dev);
> @@ -318,10 +337,12 @@ static struct pcie_port_service_driver hpdriver_portdrv = {
> .remove = pciehp_remove,
>
> #ifdef CONFIG_PM
> +#ifdef CONFIG_PM_SLEEP
> .suspend = pciehp_suspend,
> .resume_noirq = pciehp_resume_noirq,
> .resume = pciehp_resume,
> - .runtime_suspend = pciehp_suspend,
> +#endif
> + .runtime_suspend = pciehp_runtime_suspend,
> .runtime_resume = pciehp_runtime_resume,
> #endif /* PM */
> };
> --
> 2.23.0
>

\
 
 \ /
  Last update: 2019-11-14 00:07    [W:0.352 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site