lkml.org 
[lkml]   [2019]   [Nov]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 3/6] ARM: dts: bcm2711: Enable PCIe controller
Date
This enables bcm2711's PCIe bus, which is hardwired to a VIA
Technologies XHCI USB 3.0 controller.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

---

Changes since v1:
- remove linux,pci-domain
---
arch/arm/boot/dts/bcm2711.dtsi | 46 ++++++++++++++++++++++++++++++++++
1 file changed, 46 insertions(+)

diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index 667658497898..664fefb2011e 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -288,6 +288,52 @@ IRQ_TYPE_LEVEL_LOW)>,
arm,cpu-registers-not-fw-configured;
};

+ scb {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ ranges = <0x0 0x7c000000 0x0 0xfc000000 0x03800000>,
+ <0x6 0x00000000 0x6 0x00000000 0x40000000>;
+
+ pcie_0: pcie@7d500000 {
+ compatible = "brcm,bcm2711-pcie";
+ reg = <0x0 0x7d500000 0x9310>;
+ msi-controller;
+ msi-parent = <&pcie_0>;
+ #address-cells = <3>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ brcm,enable-ssc;
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pcie", "msi";
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143
+ IRQ_TYPE_LEVEL_HIGH
+ 0 0 0 2 &gicv2 GIC_SPI 144
+ IRQ_TYPE_LEVEL_HIGH
+ 0 0 0 3 &gicv2 GIC_SPI 145
+ IRQ_TYPE_LEVEL_HIGH
+ 0 0 0 4 &gicv2 GIC_SPI 146
+ IRQ_TYPE_LEVEL_HIGH>;
+
+ ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000
+ 0x0 0x04000000>;
+ /*
+ * The wrapper around the PCIe block has a bug
+ * preventing it from accessing beyond the first 3GB of
+ * memory. As the bus DMA mask is rounded up to the
+ * closest power of two of the dma-range size, we're
+ * forced to set the limit at 2GB. This can be
+ * harmlessly changed in the future once the DMA code
+ * handles non power of two DMA limits.
+ */
+ dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000
+ 0x0 0x80000000>;
+ };
+ };
+
cpus: cpus {
#address-cells = <1>;
#size-cells = <0>;
--
2.24.0
\
 
 \ /
  Last update: 2019-11-12 17:00    [W:0.154 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site