lkml.org 
[lkml]   [2019]   [Nov]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/3] dt-binding: iio: Add documentation for ADM1177
Date
Documentation for ADM1177 was added.

Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
---
.../bindings/iio/adc/adi,adm1177.yaml | 60 +++++++++++++++++++
1 file changed, 60 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,adm1177.yaml

diff --git a/Documentation/devicetree/bindings/iio/adc/adi,adm1177.yaml b/Documentation/devicetree/bindings/iio/adc/adi,adm1177.yaml
new file mode 100644
index 000000000000..69a0230e59f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,adm1177.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,adm1177.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADM1177 Hot Swap Controller and Digital Power Monitor
+
+maintainers:
+ - Michael Hennerich <michael.hennerich@analog.com>
+ - Beniamin Bia <beniamin.bia@analog.com>
+
+description: |
+ Analog Devices ADM1177 Hot Swap Controller and Digital Power Monitor
+ https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1177.pdf
+
+properties:
+ compatible:
+ enum:
+ - adi,adm1177
+
+ reg:
+ maxItems: 1
+
+ avcc-supply:
+ description:
+ Phandle to the Avcc power supply
+
+ adi,r-sense-micro-ohms:
+ description:
+ The value of curent sense resistor in microohms.
+
+ adi,shutdown-threshold-microamp:
+ description:
+ Specifies the current level at which an over current alert occurs.
+ maximum: 255
+
+ adi,vrange-high-enable:
+ description:
+ Specifies which internal voltage divider to be used. A 1 selects
+ a 7:2 voltage divider while a 0 selects a 14:1 voltage divider.
+ type: boolean
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc@b4 {
+ compatible = "adi,adm1177";
+ reg = <0xb4>;
+ };
+ };
+...
--
2.17.1
\
 
 \ /
  Last update: 2019-11-12 16:36    [W:0.190 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site