lkml.org 
[lkml]   [2019]   [Nov]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RESEND Patch v3 16/20] media: ti-vpe: cal: Add subdev s_power hooks
Date
Because V4L2 still uses a specific way to manage power state of devices
that predates runtime PM, bridge driver should power on and off sub
device explicitly.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
drivers/media/platform/ti-vpe/cal.c | 12 ++++++++++++
1 file changed, 12 insertions(+)

diff --git a/drivers/media/platform/ti-vpe/cal.c b/drivers/media/platform/ti-vpe/cal.c
index 58d2edc087fb..5b5ff32b6120 100644
--- a/drivers/media/platform/ti-vpe/cal.c
+++ b/drivers/media/platform/ti-vpe/cal.c
@@ -1654,6 +1654,12 @@ static int cal_start_streaming(struct vb2_queue *vq, unsigned int count)
if (ret < 0)
goto err;

+ ret = v4l2_subdev_call(ctx->sensor, core, s_power, 1);
+ if (ret < 0 && ret != -ENOIOCTLCMD && ret != -ENODEV) {
+ ctx_err(ctx, "power on failed in subdev\n");
+ goto err;
+ }
+
cal_runtime_get(ctx->dev);

csi2_ctx_config(ctx);
@@ -1667,6 +1673,7 @@ static int cal_start_streaming(struct vb2_queue *vq, unsigned int count)

ret = v4l2_subdev_call(ctx->sensor, video, s_stream, 1);
if (ret) {
+ v4l2_subdev_call(ctx->sensor, core, s_power, 0);
ctx_err(ctx, "stream on failed in subdev\n");
cal_runtime_put(ctx->dev);
goto err;
@@ -1695,6 +1702,7 @@ static void cal_stop_streaming(struct vb2_queue *vq)
struct cal_dmaqueue *dma_q = &ctx->vidq;
struct cal_buffer *buf, *tmp;
unsigned long flags;
+ int ret;

csi2_ppi_disable(ctx);
disable_irqs(ctx);
@@ -1703,6 +1711,10 @@ static void cal_stop_streaming(struct vb2_queue *vq)
if (v4l2_subdev_call(ctx->sensor, video, s_stream, 0))
ctx_err(ctx, "stream off failed in subdev\n");

+ ret = v4l2_subdev_call(ctx->sensor, core, s_power, 0);
+ if (ret < 0 && ret != -ENOIOCTLCMD && ret != -ENODEV)
+ ctx_err(ctx, "power off failed in subdev\n");
+
/* Release all active buffers */
spin_lock_irqsave(&ctx->slock, flags);
list_for_each_entry_safe(buf, tmp, &dma_q->active, list) {
--
2.17.1
\
 
 \ /
  Last update: 2019-11-12 15:51    [W:0.096 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site