lkml.org 
[lkml]   [2019]   [Nov]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[Patch v4 2/3] ARM: dts: dra7: add vpe clkctrl node
Date
Add clkctrl nodes for VPE module.

Note that because of the current dts node name dependency for mapping to
clock domain, we must still use "vpe-clkctrl@" naming instead of generic
"clock@" naming for the node. And because of this, it's probably best to
apply the dts node addition together along with the other clock changes.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
arch/arm/boot/dts/dra7xx-clocks.dtsi | 18 ++++++++++++++++--
1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
index 93e1eb83bed9..d1c2406ec71c 100644
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -1591,10 +1591,10 @@

rtc_cm: rtc-cm@700 {
compatible = "ti,omap4-cm";
- reg = <0x700 0x100>;
+ reg = <0x700 0x60>;
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0 0x700 0x100>;
+ ranges = <0 0x700 0x60>;

rtc_clkctrl: rtc-clkctrl@20 {
compatible = "ti,clkctrl";
@@ -1603,6 +1603,20 @@
};
};

+ vpe_cm: vpe-cm@760 {
+ compatible = "ti,omap4-cm";
+ reg = <0x760 0xc>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x760 0xc>;
+
+ vpe_clkctrl: vpe-clkctrl@0 {
+ compatible = "ti,clkctrl";
+ reg = <0x0 0xc>;
+ #clock-cells = <2>;
+ };
+ };
+
};

&cm_core {
--
2.17.1
\
 
 \ /
  Last update: 2019-11-12 15:24    [W:1.099 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site