lkml.org 
[lkml]   [2019]   [Nov]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2] arm64: dts: rockchip: Add SDR104 mode to SD-card I/F on rk3399-roc-pc
On Tue, 12 Nov 2019 at 09:45, Markus Reichl <m.reichl@fivetechno.de> wrote:
>
> Add SDR104 capability and regulators to SD card node.
> While at it, fix a typo in lcd pinctrl and remove two
> undocumented bindings from pmic.
>
> Signed-off-by: Markus Reichl <m.reichl@fivetechno.de>

FWIW:

Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>

Kind regards
Uffe

> ---
> v2: Remove always-on from vcc3v0_sd
> ---
> .../boot/dts/rockchip/rk3399-roc-pc.dtsi | 30 +++++++++++++++----
> 1 file changed, 24 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
> index d1eb55c855b3..a31099f7620b 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
> @@ -135,6 +135,19 @@
> vin-supply = <&vcc_1v8>;
> };
>
> + vcc3v0_sd: vcc3v0-sd {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpio = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&vcc3v0_sd_en>;
> + regulator-name = "vcc3v0_sd";
> + regulator-boot-on;
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + vin-supply = <&vcc3v3_sys>;
> + };
> +
> vcc3v3_sys: vcc3v3-sys {
> compatible = "regulator-fixed";
> regulator-name = "vcc3v3_sys";
> @@ -293,8 +306,6 @@
> vcc10-supply = <&vcc3v3_sys>;
> vcc11-supply = <&vcc3v3_sys>;
> vcc12-supply = <&vcc3v3_sys>;
> - vcc13-supply = <&vcc3v3_sys>;
> - vcc14-supply = <&vcc3v3_sys>;
> vddio-supply = <&vcc_3v0>;
>
> regulators {
> @@ -576,7 +587,7 @@
>
> lcd-panel {
> lcd_panel_reset: lcd-panel-reset {
> - rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
> + rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
> };
> };
>
> @@ -602,6 +613,10 @@
> vsel2_gpio: vsel2-gpio {
> rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
> };
> +
> + pmic_int_l: pmic-int-l {
> + rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> };
>
> sdio-pwrseq {
> @@ -610,9 +625,9 @@
> };
> };
>
> - pmic {
> - pmic_int_l: pmic-int-l {
> - rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
> + sdmmc {
> + vcc3v0_sd_en: vcc3v0-sd-en {
> + rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
> };
> };
>
> @@ -667,6 +682,9 @@
> cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
> disable-wp;
> max-frequency = <150000000>;
> + sd-uhs-sdr104;
> + vmmc-supply = <&vcc3v0_sd>;
> + vqmmc-supply = <&vcc_sdio>;
> pinctrl-names = "default";
> pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
> status = "okay";
> --
> 2.20.1
>

\
 
 \ /
  Last update: 2019-11-12 10:00    [W:0.703 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site