lkml.org 
[lkml]   [2019]   [Nov]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 00/47] QUICC Engine support on ARM and ARM64
On Mon, Nov 11, 2019 at 5:39 PM Li Yang <leoyang.li@nxp.com> wrote:
>
> On Fri, Nov 8, 2019 at 7:05 AM Rasmus Villemoes
> <linux@rasmusvillemoes.dk> wrote:
> >
>
> I'm generally ok with these enhencements and cleanups. But as the
> whole patch series touched multiple subsystems, I would like to
> collect the Acked-by from Scott, Greg and David if we want the whole
> series to go through the fsl/soc tree.

Rasmus,

Since the patches also touched net and serial subsystem. Can you also
repost these patches(maybe just related ones) onto netdev and
linux-serial mailing list?

Regards,
Leo
>
> Also Qiang, can you help to test the latest version and provide you
> Tested-by? Thanks.
>
> > There have been several attempts in the past few years to allow
> > building the QUICC engine drivers for platforms other than PPC. This
> > is yet another attempt.
> >
> > v3 can be found here: https://lore.kernel.org/lkml/20191101124210.14510-1-linux@rasmusvillemoes.dk/
> >
> > v4 adds a some patches to fix (ab)use of IS_ERR_VALUE which fails when
> > sizeof(u32) != sizeof(long), i.e. on 64-bit platforms. Freescale
> > drivers are some of the last holdouts using that macro (outside of
> > arch/ and core mm code), so I decided trying to simply get rid of it
> > instead of papering over it by using a temporary long to store the
> > result in. Doing that I stumbled on some other things that should be
> > fixed. These are the new patches 34-45.
> >
> > Patch 35 from v3 (which added a PPC32 dependency to FSL_UCC_HDLC) is
> > gone from this version, so that that driver can indeed now be built
> > for arm and arm64.
> >
> > 1-5 are about replacing in_be32 etc. in the core QE code (drivers/soc/fsl/qe).
> >
> > 6-8 handle miscellaneous other ppcisms.
> >
> > 9-21 deal with qe_ic: Simplifying the driver significantly by removing
> > unused code, and removing the platform-specific initialization from
> > arch/powerpc/.
> >
> > 22-25 deal with raw access to devicetree properties in native endianness.
> >
> > 26-33 makes drivers/tty/serial/ucc_uart.c (CONFIG_SERIAL_QE) ready to build on arm.
> >
> > 34-45 deal with IS_ERR_VALUE() and some other things found while
> > digging around that part of the code.
> >
> > 46 adds a PPC32 dependency to UCC_GETH - it has some of the same
> > issues that have been fixed in the ucc_uart and ucc_hdlc cases. Nobody
> > has requested that I allow that driver to be built for arm{,64}, so
> > instead of growing this series even bigger, I kept that addition. It's
> > trivial to remove if somebody cares enough to fix the build
> > errors/warnings and actually has a platform to test the result on.
> >
> > Finally patch 47 lifts the PPC32 restriction from QUICC_ENGINE. At the
> > request of Li Yang, it doesn't remove the PPC32 dependency but instead
> > changes it to PPC32 || ARM || ARM64 (or COMPILE_TEST), i.e. listing
> > the platforms that may have a QE.
> >
> > The series has been built and booted on both an mpc8309-based platform
> > (ppc) as well as an ls1021a-based platform (arm). The core QE code is
> > exercised on both, while I could only test the ucc_uart on arm, since
> > the uarts are not wired up on our mpc8309 board. Qiang Zhao reports
> > that the ucc_hdlc driver does indeed work on a ls1043ardb (arm64)
> > board, I hope he'll formally add a Tested-by: to the relevant patches
> > since I don't have any arm64 board with QE.
> >
> > Rasmus Villemoes (47):
> > soc: fsl: qe: remove space-before-tab
> > soc: fsl: qe: drop volatile qualifier of struct qe_ic::regs
> > soc: fsl: qe: rename qe_(clr/set/clrset)bit* helpers
> > soc: fsl: qe: introduce qe_io{read,write}* wrappers
> > soc: fsl: qe: avoid ppc-specific io accessors
> > soc: fsl: qe: replace spin_event_timeout by readx_poll_timeout_atomic
> > soc: fsl: qe: qe.c: guard use of pvr_version_is() with CONFIG_PPC32
> > soc: fsl: qe: drop unneeded #includes
> > soc: fsl: qe: drop assign-only high_active in qe_ic_init
> > soc: fsl: qe: remove pointless sysfs registration in qe_ic.c
> > soc: fsl: qe: use qe_ic_cascade_{low,high}_mpic also on 83xx
> > soc: fsl: qe: move calls of qe_ic_init out of arch/powerpc/
> > powerpc/83xx: remove mpc83xx_ipic_and_qe_init_IRQ
> > powerpc/85xx: remove mostly pointless mpc85xx_qe_init()
>
> Scott,
> What do you think about the PPC changes?
>
> > soc: fsl: qe: move qe_ic_cascade_* functions to qe_ic.c
> > soc: fsl: qe: rename qe_ic_cascade_low_mpic -> qe_ic_cascade_low
> > soc: fsl: qe: remove unused qe_ic_set_* functions
> > soc: fsl: qe: don't use NO_IRQ in qe_ic.c
> > soc: fsl: qe: make qe_ic_get_{low,high}_irq static
> > soc: fsl: qe: simplify qe_ic_init()
> > soc: fsl: qe: merge qe_ic.h headers into qe_ic.c
> > soc: fsl: qe: qe.c: use of_property_read_* helpers
> > soc: fsl: qe: qe_io.c: don't open-code of_parse_phandle()
> > soc: fsl: qe: qe_io.c: access device tree property using be32_to_cpu
> > soc: fsl: qe: qe_io.c: use of_property_read_u32() in par_io_init()
> > soc: fsl: move cpm.h from powerpc/include/asm to include/soc/fsl
> > soc/fsl/qe/qe.h: update include path for cpm.h
> > serial: ucc_uart: explicitly include soc/fsl/cpm.h
> > serial: ucc_uart: replace ppc-specific IO accessors
> > serial: ucc_uart: factor out soft_uart initialization
> > serial: ucc_uart: stub out soft_uart_init for !CONFIG_PPC32
> > serial: ucc_uart: use of_property_read_u32() in ucc_uart_probe()
> > serial: ucc_uart: access __be32 field using be32_to_cpu
>
> Greg and Timur,
> What do you think about these serial changes.
>
> > soc: fsl: qe: change return type of cpm_muram_alloc() to s32
> > soc: fsl: qe: make cpm_muram_free() return void
> > soc: fsl: qe: make cpm_muram_free() ignore a negative offset
> > soc: fsl: qe: drop broken lazy call of cpm_muram_init()
> > soc: fsl: qe: refactor cpm_muram_alloc_common to prevent BUG on error
> > path
> > soc: fsl: qe: avoid IS_ERR_VALUE in ucc_slow.c
> > soc: fsl: qe: drop use of IS_ERR_VALUE in qe_sdma_init()
> > soc: fsl: qe: drop pointless check in qe_sdma_init()
> > soc: fsl: qe: avoid IS_ERR_VALUE in ucc_fast.c
> > net/wan/fsl_ucc_hdlc: avoid use of IS_ERR_VALUE()
> > net/wan/fsl_ucc_hdlc: fix reading of __be16 registers
> > net/wan/fsl_ucc_hdlc: reject muram offsets above 64K
> > net: ethernet: freescale: make UCC_GETH explicitly depend on PPC32
>
> David and Qiang,
> What do you think of the net changes?
>
> > soc: fsl: qe: remove PPC32 dependency from CONFIG_QUICC_ENGINE
> >
> > arch/powerpc/include/asm/cpm.h | 172 +-------
> > arch/powerpc/platforms/83xx/km83xx.c | 3 +-
> > arch/powerpc/platforms/83xx/misc.c | 23 --
> > arch/powerpc/platforms/83xx/mpc832x_mds.c | 3 +-
> > arch/powerpc/platforms/83xx/mpc832x_rdb.c | 3 +-
> > arch/powerpc/platforms/83xx/mpc836x_mds.c | 3 +-
> > arch/powerpc/platforms/83xx/mpc836x_rdk.c | 3 +-
> > arch/powerpc/platforms/83xx/mpc83xx.h | 7 -
> > arch/powerpc/platforms/85xx/common.c | 23 --
> > arch/powerpc/platforms/85xx/corenet_generic.c | 12 -
> > arch/powerpc/platforms/85xx/mpc85xx.h | 2 -
> > arch/powerpc/platforms/85xx/mpc85xx_mds.c | 28 --
> > arch/powerpc/platforms/85xx/mpc85xx_rdb.c | 18 -
> > arch/powerpc/platforms/85xx/twr_p102x.c | 16 -
> > drivers/net/ethernet/freescale/Kconfig | 2 +-
> > drivers/net/wan/fsl_ucc_hdlc.c | 23 +-
> > drivers/net/wan/fsl_ucc_hdlc.h | 2 +-
> > drivers/soc/fsl/qe/Kconfig | 3 +-
> > drivers/soc/fsl/qe/gpio.c | 34 +-
> > drivers/soc/fsl/qe/qe.c | 104 ++---
> > drivers/soc/fsl/qe/qe_common.c | 50 +--
> > drivers/soc/fsl/qe/qe_ic.c | 285 ++++++-------
> > drivers/soc/fsl/qe/qe_ic.h | 99 -----
> > drivers/soc/fsl/qe/qe_io.c | 70 ++--
> > drivers/soc/fsl/qe/qe_tdm.c | 8 +-
> > drivers/soc/fsl/qe/ucc.c | 26 +-
> > drivers/soc/fsl/qe/ucc_fast.c | 86 ++--
> > drivers/soc/fsl/qe/ucc_slow.c | 60 ++-
> > drivers/soc/fsl/qe/usb.c | 2 +-
> > drivers/tty/serial/ucc_uart.c | 383 +++++++++---------
> > include/soc/fsl/cpm.h | 171 ++++++++
> > include/soc/fsl/qe/qe.h | 59 ++-
> > include/soc/fsl/qe/qe_ic.h | 135 ------
> > include/soc/fsl/qe/ucc_fast.h | 4 +-
> > include/soc/fsl/qe/ucc_slow.h | 6 +-
> > 35 files changed, 770 insertions(+), 1158 deletions(-)
> > delete mode 100644 drivers/soc/fsl/qe/qe_ic.h
> > create mode 100644 include/soc/fsl/cpm.h
> > delete mode 100644 include/soc/fsl/qe/qe_ic.h
> >
> > --
> > 2.23.0
> >

\
 
 \ /
  Last update: 2019-11-12 21:45    [W:0.176 / U:0.704 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site