lkml.org 
[lkml]   [2019]   [Nov]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] i2c: i2c-cros-ec-tunnel: Make the device acpi compatible
From
Date
Hi Akshu,

Thanks for sending this upstream and improve CrOS EC

On 11/11/19 17:14, Akshu Agrawal wrote:
> Add ACPI entry and use device_property_read to get fw value
> which is common to both dtsi and acpi.
>
> Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
> ---
> drivers/i2c/busses/i2c-cros-ec-tunnel.c | 15 ++++++++++-----
> 1 file changed, 10 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-cros-ec-tunnel.c b/drivers/i2c/busses/i2c-cros-ec-tunnel.c
> index c551aa96a2e3..958161c71985 100644
> --- a/drivers/i2c/busses/i2c-cros-ec-tunnel.c
> +++ b/drivers/i2c/busses/i2c-cros-ec-tunnel.c
> @@ -3,6 +3,7 @@
> //
> // Copyright (C) 2013 Google, Inc.
>
> +#include <linux/acpi.h>
> #include <linux/module.h>
> #include <linux/i2c.h>
> #include <linux/platform_data/cros_ec_commands.h>
> @@ -240,7 +241,6 @@ static const struct i2c_algorithm ec_i2c_algorithm = {
>
> static int ec_i2c_probe(struct platform_device *pdev)
> {
> - struct device_node *np = pdev->dev.of_node;
> struct cros_ec_device *ec = dev_get_drvdata(pdev->dev.parent);
> struct device *dev = &pdev->dev;
> struct ec_i2c_device *bus = NULL;
> @@ -256,7 +256,7 @@ static int ec_i2c_probe(struct platform_device *pdev)
> if (bus == NULL)
> return -ENOMEM;
>
> - err = of_property_read_u32(np, "google,remote-bus", &remote_bus);
> + err = device_property_read_u32(dev, "google,remote-bus", &remote_bus);
> if (err) {
> dev_err(dev, "Couldn't read remote-bus property\n");
> return err;
> @@ -271,7 +271,7 @@ static int ec_i2c_probe(struct platform_device *pdev)
> bus->adap.algo = &ec_i2c_algorithm;
> bus->adap.algo_data = bus;
> bus->adap.dev.parent = &pdev->dev;
> - bus->adap.dev.of_node = np;
> + bus->adap.dev.of_node = pdev->dev.of_node;

That change is not really needed/(related) but as np was only used here I'm fine
with it.

> bus->adap.retries = I2C_MAX_RETRIES;
>
> err = i2c_add_adapter(&bus->adap);
> @@ -291,19 +291,24 @@ static int ec_i2c_remove(struct platform_device *dev)
> return 0;
> }
>
> -#ifdef CONFIG_OF
> static const struct of_device_id cros_ec_i2c_of_match[] = {
> { .compatible = "google,cros-ec-i2c-tunnel" },
> {},
> };
> MODULE_DEVICE_TABLE(of, cros_ec_i2c_of_match);
> -#endif
> +
> +static const struct acpi_device_id cros_ec_i2c_tunnel_acpi_id[] = {
> + { "GOOG001A", 0 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(acpi, cros_ec_i2c_tunnel_acpi_id);
>
> static struct platform_driver ec_i2c_tunnel_driver = {
> .probe = ec_i2c_probe,
> .remove = ec_i2c_remove,
> .driver = {
> .name = "cros-ec-i2c-tunnel",
> + .acpi_match_table = ACPI_PTR(cros_ec_i2c_tunnel_acpi_id),
> .of_match_table = of_match_ptr(cros_ec_i2c_of_match),
> },
> };
>

Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

Question: Is this supported on older firmwares or is only expected to work on
newer ACPI-based devices?

Thanks,
Enric

\
 
 \ /
  Last update: 2019-11-11 18:18    [W:0.094 / U:0.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site