lkml.org 
[lkml]   [2019]   [Nov]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next 5/6] net: stmmac: Rework stmmac_rx()
Date
This looks over-engineered. Let's use some helpers to get the buffer
length and hereby simplify the stmmac_rx() function. No performance drop
was seen with the new implementation.

Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>

---
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Jose Abreu <joabreu@synopsys.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: netdev@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 146 ++++++++++++++--------
1 file changed, 94 insertions(+), 52 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 5f40fbb67bac..a2fac7772666 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3443,6 +3443,55 @@ static inline void stmmac_rx_refill(struct stmmac_priv *priv, u32 queue)
stmmac_set_rx_tail_ptr(priv, priv->ioaddr, rx_q->rx_tail_addr, queue);
}

+static unsigned int stmmac_rx_buf1_len(struct stmmac_priv *priv,
+ struct dma_desc *p,
+ int status, unsigned int len)
+{
+ int ret, coe = priv->hw->rx_csum;
+ unsigned int plen = 0, hlen = 0;
+
+ /* Not first descriptor, buffer is always zero */
+ if (priv->sph && len)
+ return 0;
+
+ /* First descriptor, get split header length */
+ ret = stmmac_get_rx_header_len(priv, p, &hlen);
+ if (priv->sph && hlen) {
+ priv->xstats.rx_split_hdr_pkt_n++;
+ return hlen;
+ }
+
+ /* First descriptor, not last descriptor and not split header */
+ if (status & rx_not_ls)
+ return priv->dma_buf_sz;
+
+ plen = stmmac_get_rx_frame_len(priv, p, coe);
+
+ /* First descriptor and last descriptor and not split header */
+ return min_t(unsigned int, priv->dma_buf_sz, plen);
+}
+
+static unsigned int stmmac_rx_buf2_len(struct stmmac_priv *priv,
+ struct dma_desc *p,
+ int status, unsigned int len)
+{
+ int coe = priv->hw->rx_csum;
+ unsigned int plen = 0;
+
+ /* Not split header, buffer is not available */
+ if (!priv->sph)
+ return 0;
+
+ /* Not last descriptor */
+ if (status & rx_not_ls)
+ return priv->dma_buf_sz;
+
+ plen = stmmac_get_rx_frame_len(priv, p, coe);
+
+ /* Last descriptor */
+ return plen - len;
+}
+
/**
* stmmac_rx - manage the receive process
* @priv: driver private structure
@@ -3472,11 +3521,10 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue)
stmmac_display_ring(priv, rx_head, DMA_RX_SIZE, true);
}
while (count < limit) {
- unsigned int hlen = 0, prev_len = 0;
+ unsigned int buf1_len = 0, buf2_len = 0;
enum pkt_hash_types hash_type;
struct stmmac_rx_buffer *buf;
struct dma_desc *np, *p;
- unsigned int sec_len;
int entry;
u32 hash;

@@ -3495,7 +3543,8 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue)
break;

read_again:
- sec_len = 0;
+ buf1_len = 0;
+ buf2_len = 0;
entry = next_entry;
buf = &rx_q->buf_pool[entry];

@@ -3520,7 +3569,6 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue)
np = rx_q->dma_rx + next_entry;

prefetch(np);
- prefetch(page_address(buf->page));

if (priv->extend_desc)
stmmac_rx_extended_status(priv, &priv->dev->stats,
@@ -3537,69 +3585,61 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue)
goto read_again;
if (unlikely(error)) {
dev_kfree_skb(skb);
+ skb = NULL;
count++;
continue;
}

/* Buffer is good. Go on. */

- if (likely(status & rx_not_ls)) {
- len += priv->dma_buf_sz;
- } else {
- prev_len = len;
- len = stmmac_get_rx_frame_len(priv, p, coe);
-
- /* ACS is set; GMAC core strips PAD/FCS for IEEE 802.3
- * Type frames (LLC/LLC-SNAP)
- *
- * llc_snap is never checked in GMAC >= 4, so this ACS
- * feature is always disabled and packets need to be
- * stripped manually.
- */
- if (unlikely(priv->synopsys_id >= DWMAC_CORE_4_00) ||
- unlikely(status != llc_snap))
- len -= ETH_FCS_LEN;
+ prefetch(page_address(buf->page));
+ if (buf->sec_page)
+ prefetch(page_address(buf->sec_page));
+
+ buf1_len = stmmac_rx_buf1_len(priv, p, status, len);
+ len += buf1_len;
+ buf2_len = stmmac_rx_buf2_len(priv, p, status, len);
+ len += buf2_len;
+
+ /* ACS is set; GMAC core strips PAD/FCS for IEEE 802.3
+ * Type frames (LLC/LLC-SNAP)
+ *
+ * llc_snap is never checked in GMAC >= 4, so this ACS
+ * feature is always disabled and packets need to be
+ * stripped manually.
+ */
+ if (unlikely(priv->synopsys_id >= DWMAC_CORE_4_00) ||
+ unlikely(status != llc_snap)) {
+ if (buf2_len)
+ buf2_len -= ETH_FCS_LEN;
+ else
+ buf1_len -= ETH_FCS_LEN;
+
+ len -= ETH_FCS_LEN;
}

if (!skb) {
- int ret = stmmac_get_rx_header_len(priv, p, &hlen);
-
- if (priv->sph && !ret && (hlen > 0)) {
- sec_len = len;
- if (!(status & rx_not_ls))
- sec_len = sec_len - hlen;
- len = hlen;
-
- prefetch(page_address(buf->sec_page));
- priv->xstats.rx_split_hdr_pkt_n++;
- }
-
- skb = napi_alloc_skb(&ch->rx_napi, len);
+ skb = napi_alloc_skb(&ch->rx_napi, buf1_len);
if (!skb) {
priv->dev->stats.rx_dropped++;
count++;
- continue;
+ goto drain_data;
}

- dma_sync_single_for_cpu(priv->device, buf->addr, len,
- DMA_FROM_DEVICE);
+ dma_sync_single_for_cpu(priv->device, buf->addr,
+ buf1_len, DMA_FROM_DEVICE);
skb_copy_to_linear_data(skb, page_address(buf->page),
- len);
- skb_put(skb, len);
+ buf1_len);
+ skb_put(skb, buf1_len);

/* Data payload copied into SKB, page ready for recycle */
page_pool_recycle_direct(rx_q->page_pool, buf->page);
buf->page = NULL;
- } else {
- unsigned int buf_len = len - prev_len;
-
- if (likely(status & rx_not_ls))
- buf_len = priv->dma_buf_sz;
-
+ } else if (buf1_len) {
dma_sync_single_for_cpu(priv->device, buf->addr,
- buf_len, DMA_FROM_DEVICE);
+ buf1_len, DMA_FROM_DEVICE);
skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags,
- buf->page, 0, buf_len,
+ buf->page, 0, buf1_len,
priv->dma_buf_sz);

/* Data payload appended into SKB */
@@ -3607,22 +3647,23 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue)
buf->page = NULL;
}

- if (sec_len > 0) {
+ if (buf2_len) {
dma_sync_single_for_cpu(priv->device, buf->sec_addr,
- sec_len, DMA_FROM_DEVICE);
+ buf2_len, DMA_FROM_DEVICE);
skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags,
- buf->sec_page, 0, sec_len,
+ buf->sec_page, 0, buf2_len,
priv->dma_buf_sz);

- len += sec_len;
-
/* Data payload appended into SKB */
page_pool_release_page(rx_q->page_pool, buf->sec_page);
buf->sec_page = NULL;
}

+drain_data:
if (likely(status & rx_not_ls))
goto read_again;
+ if (!skb)
+ continue;

/* Got entire packet into SKB. Finish it. */

@@ -3640,13 +3681,14 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue)

skb_record_rx_queue(skb, queue);
napi_gro_receive(&ch->rx_napi, skb);
+ skb = NULL;

priv->dev->stats.rx_packets++;
priv->dev->stats.rx_bytes += len;
count++;
}

- if (status & rx_not_ls) {
+ if (status & rx_not_ls || skb) {
rx_q->state_saved = true;
rx_q->state.skb = skb;
rx_q->state.error = error;
--
2.7.4
\
 
 \ /
  Last update: 2019-11-11 15:43    [W:0.090 / U:1.404 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site