lkml.org 
[lkml]   [2019]   [Nov]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [RFC PATCH v2] arm64: cpufeatures: add support for tlbi range instructions
From
Date


On 2019/11/12 0:32, Olof Johansson wrote:
> On Mon, Nov 11, 2019 at 5:24 AM Zhenyu Ye <yezhenyu2@huawei.com> wrote:
>>
>> ARMv8.4-TLBI provides TLBI invalidation instruction that apply to a
>> range of input addresses. This patch adds support for this feature.
>> This is the second version of the patch.
>>
>> I traced the __flush_tlb_range() for a minute and get some statistical
>> data as below:
>>
>> PAGENUM COUNT
>> 1 34944
>> 2 5683
>> 3 1343
>> 4 7857
>> 5 838
>> 9 339
>> 16 933
>> 19 427
>> 20 5821
>> 23 279
>> 41 338
>> 141 279
>> 512 428
>> 1668 120
>> 2038 100
>>
>> Those data are based on kernel-5.4.0, where PAGENUM = end - start, COUNT
>> shows number of calls to the __flush_tlb_range() in a minute. There only
>> shows the data which COUNT >= 100. The kernel is started normally, and
>> transparent hugepage is opened. As we can see, though most user TLBI
>> ranges were 1 pages long, the num of long-range can not be ignored.
>>
>> The new feature of TLB range can improve lots of performance compared to
>> the current implementation. As an example, flush 512 ranges needs only 1
>> instruction as opposed to 512 instructions using current implementation.
>
> But there's no indication whether this performs better or not in reality.
>
> A perf report indicating, for example, cycles spent in TLBI on the two
> versions would be a lot more valuable.
>

We don't have a performance test environment supporting TLBI range right
now, so there is only some theoretical analysis. Anyway, above data shows
there are application scenarios of wide pages range.

>> And for a new hardware feature, support is better than not.
>
> This is blatantly untrue. Complexity is added, and if there's no
> evidence of benefit of said complexity, it is not something we want to
> add.
>

You are right. I will do some benchmarks when conditions permit. Data is
the most convincing. And I will modify my code according to your advice
below.

When the benchmark data is ready, I will send a new version of this patch.


>> Signed-off-by: Zhenyu Ye <yezhenyu2@huawei.com>
>> ---
>> ChangeLog v1 -> v2:
>> - Change the main implementation of this feature.
>> - Add some comments.
>>
>> ---
>> arch/arm64/include/asm/cpucaps.h | 3 +-
>> arch/arm64/include/asm/sysreg.h | 4 ++
>> arch/arm64/include/asm/tlbflush.h | 99 ++++++++++++++++++++++++++++++-
>> arch/arm64/kernel/cpufeature.c | 10 ++++
>> 4 files changed, 112 insertions(+), 4 deletions(-)
>>
>> diff --git a/arch/arm64/include/asm/cpucaps.h b/arch/arm64/include/asm/cpucaps.h
>> index ac1dbca3d0cd..5b5230060e5b 100644
>> --- a/arch/arm64/include/asm/cpucaps.h
>> +++ b/arch/arm64/include/asm/cpucaps.h
>> @@ -54,7 +54,8 @@
>> #define ARM64_WORKAROUND_1463225 44
>> #define ARM64_WORKAROUND_CAVIUM_TX2_219_TVM 45
>> #define ARM64_WORKAROUND_CAVIUM_TX2_219_PRFM 46
>> +#define ARM64_HAS_TLBI_RANGE 47
>>
>> -#define ARM64_NCAPS 47
>> +#define ARM64_NCAPS 48
>>
>> #endif /* __ASM_CPUCAPS_H */
>> diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
>> index 6e919fafb43d..a6abbf2b067d 100644
>> --- a/arch/arm64/include/asm/sysreg.h
>> +++ b/arch/arm64/include/asm/sysreg.h
>> @@ -539,6 +539,7 @@
>> ENDIAN_SET_EL1 | SCTLR_EL1_UCI | SCTLR_EL1_RES1)
>>
>> /* id_aa64isar0 */
>> +#define ID_AA64ISAR0_TLB_SHIFT 56
>> #define ID_AA64ISAR0_TS_SHIFT 52
>> #define ID_AA64ISAR0_FHM_SHIFT 48
>> #define ID_AA64ISAR0_DP_SHIFT 44
>> @@ -552,6 +553,9 @@
>> #define ID_AA64ISAR0_SHA1_SHIFT 8
>> #define ID_AA64ISAR0_AES_SHIFT 4
>>
>> +#define ID_AA64ISAR0_TLB_NI 0x0
>> +#define ID_AA64ISAR0_TLB_RANGE 0x2
>> +
>> /* id_aa64isar1 */
>> #define ID_AA64ISAR1_SB_SHIFT 36
>> #define ID_AA64ISAR1_FRINTTS_SHIFT 32
>> diff --git a/arch/arm64/include/asm/tlbflush.h b/arch/arm64/include/asm/tlbflush.h
>> index bc3949064725..f49bed7ecb68 100644
>> --- a/arch/arm64/include/asm/tlbflush.h
>> +++ b/arch/arm64/include/asm/tlbflush.h
>> @@ -59,6 +59,33 @@
>> __ta; \
>> })
>>
>> +/*
>> + * This macro creates a properly formatted VA operand for the TLBI RANGE.
>> + * The value bit assignments are:
>> + *
>> + * +----------+------+-------+-------+-------+----------------------+
>> + * | ASID | TG | SCALE | NUM | TTL | BADDR |
>> + * +-----------------+-------+-------+-------+----------------------+
>> + * |63 48|47 46|45 44|43 39|38 37|36 0|
>> + *
>> + * The address range is determined by below formula:
>> + * [BADDR, BADDR + (NUM + 1) * 2^(5*SCALE + 1) * PAGESIZE)
>> + *
>> + */
>> +#define __TLBI_VADDR_RANGE(addr, asid, tg, scale, num, ttl) \
>> + ({ \
>> + unsigned long __ta = (addr) >> PAGE_SHIFT; \
>> + __ta |= (unsigned long)(ttl) << 37; \
>> + __ta |= (unsigned long)(num) << 39; \
>> + __ta |= (unsigned long)(scale) << 44; \
>> + __ta |= (unsigned long)(tg) << 46; \
>> + __ta |= (unsigned long)(asid) << 48; \
>> + __ta; \
>> + })
>> +
>> +#define TLB_RANGE_MASK_SHIFT 5
>> +#define TLB_RANGE_MASK GENMASK_ULL(TLB_RANGE_MASK_SHIFT, 0)
>> +
>> /*
>> * TLB Invalidation
>> * ================
>> @@ -177,9 +204,9 @@ static inline void flush_tlb_page(struct vm_area_struct *vma,
>> */
>> #define MAX_TLBI_OPS PTRS_PER_PTE
>>
>> -static inline void __flush_tlb_range(struct vm_area_struct *vma,
>> - unsigned long start, unsigned long end,
>> - unsigned long stride, bool last_level)
>> +static inline void __flush_tlb_range_old(struct vm_area_struct *vma,
>> + unsigned long start, unsigned long end,
>> + unsigned long stride, bool last_level)
>
> "old" and "new" are not very descriptive.
>

I will change these.

>> {
>> unsigned long asid = ASID(vma->vm_mm);
>> unsigned long addr;
>> @@ -211,6 +238,72 @@ static inline void __flush_tlb_range(struct vm_area_struct *vma,
>> dsb(ish);
>> }
>>
>> +static inline void __flush_tlb_range_new(struct vm_area_struct *vma,
>> + unsigned long start, unsigned long end,
>> + unsigned long stride, bool last_level)
>> +{
>> + int num = 0;
>> + int scale = 0;
>> + int ttl = 0;
>> + int tg = (PAGE_SHIFT - 12) / 2 + 1;
>
> This is a constant, and shouldn't need to be a variable. You can push
> it down to the addr generator macro.
>

OK.

>> + unsigned long asid = ASID(vma->vm_mm);
>> + unsigned long addr = 0;
>> + unsigned long offset = (end - start) >> PAGE_SHIFT;
>
> "offset" confused me a lot here -- I think this variable really
> describes number of pages to flush?
>

Yes. I will use round_down and round_up here.

> And, if so, you're probably off-by-one here: you need to round up
> partial pages. As a matter of fact, you probably need to deal with
> partial pages at both beginning and end.
>
>> + if (offset > (1UL << 21)) {
>> + flush_tlb_mm(vma->vm_mm);
>> + return;
>> + }
>
> There's a comment that this limitation on iterative flushes is
> arbitrary, and selected to not trigger soft lockups. At the very
> least, you need a similar comment here as to why this code is needed.
>

This is the biggest range of TLBI range instruction supported, which
is equal to (2^5 - 1 + 1) * (2^(3 * 5 + 1)). There needs up to 4
instructions and may not trigger soft lockups. Maybe I should add
some comments here.

>> + dsb(ishst);
>> +
>> + /*
>> + * The minimum size of TLB RANGE is 2 PAGE;
>> + * Use normal TLB instruction to handle odd PAGEs
>> + */
>> + if (offset % 2 == 1) {
>> + addr = __TLBI_VADDR(start, asid);
>> + if (last_level) {
>> + __tlbi(vale1is, addr);
>> + __tlbi_user(vale1is, addr);
>> + } else {
>> + __tlbi(vae1is, addr);
>> + __tlbi_user(vae1is, addr);
>> + }
>> + start += 1 << PAGE_SHIFT;
>> + offset -= 1;
>> + }
>> +
>> + while (offset > 0) {
>> + num = (offset & TLB_RANGE_MASK) - 1;
>> + if (num >= 0) {
>> + addr = __TLBI_VADDR_RANGE(start, asid, tg,
>> + scale, num, ttl);
>> + if (last_level) {
>> + __tlbi(rvale1is, addr);
>> + __tlbi_user(rvale1is, addr);
>> + } else {
>> + __tlbi(rvae1is, addr);
>> + __tlbi_user(rvae1is, addr);
>> + }
>> + start += (num + 1) << (5 * scale + 1) << PAGE_SHIFT;
>> + }
>> + scale++;
>
> This is an odd way of doing the loop, by looping over the base and
> linearly increasing the exponent.
>
> Wouldn't it be easier to start with as high 'num' as possible as long
> as the range ("offset" in your code) is larger than 2^5, and then do a
> few iterations at the end for the smaller ranges?
>

As the above data shows, most of the range are small, so I decide to do
the flush from small to high. If we do from high to small, there may need
some additional judgment, which will add software side overhead. So I think
it's better to do this from small to high.

>> + offset >>= TLB_RANGE_MASK_SHIFT;
>> + }
>> + dsb(ish);
>> +}
>
> The inner pieces of this loop, the special case at the beginning, and
> the old implementation are all the same.
>
> The main difference between now and before are:
>
> 1) How much you step forward on each iteration
> 2) How you calculate the address argument
>
> Would it be better to just refactor the old code? You can calculate
> the ranges the same way but just loop over them for non-8.4-TLBI
> platforms.
>

However, they just look similar but actually different. There are some small
differences between now and before, such as,

__TLBI_VADDR(start, asid);
__TLBI_VADDR_RANGE(start, start, asid, tg, scale, num, ttl);

__tlbi(rvale1is, addr);
__tlbi(vale1is, addr);

So I think it's not worth to refactor the old code.

> No matter what, we really want some benchmarks and numbers to motivate
> these changes. TLB operations tend to get on critical paths where
> single cycles matter.
>

I can understand your concern. When the benchmark data is ready,
I will send a new version of this patch.

>> +static inline void __flush_tlb_range(struct vm_area_struct *vma,
>> + unsigned long start, unsigned long end,
>> + unsigned long stride, bool last_level)
>> +{
>> + if (cpus_have_const_cap(ARM64_HAS_TLBI_RANGE))
>> + __flush_tlb_range_new(vma, start, end, stride, last_level);
>> + else
>> + __flush_tlb_range_old(vma, start, end, stride, last_level);
>> +}
>> +
>> static inline void flush_tlb_range(struct vm_area_struct *vma,
>> unsigned long start, unsigned long end)
>> {
>> diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
>> index 80f459ad0190..bdefd8a34729 100644
>> --- a/arch/arm64/kernel/cpufeature.c
>> +++ b/arch/arm64/kernel/cpufeature.c
>> @@ -1566,6 +1566,16 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
>> .min_field_value = 1,
>> },
>> #endif
>> + {
>> + .desc = "TLB range maintenance instruction",
>> + .capability = ARM64_HAS_TLBI_RANGE,
>> + .type = ARM64_CPUCAP_SYSTEM_FEATURE,
>> + .matches = has_cpuid_feature,
>> + .sys_reg = SYS_ID_AA64ISAR0_EL1,
>> + .field_pos = ID_AA64ISAR0_TLB_SHIFT,
>> + .sign = FTR_UNSIGNED,
>> + .min_field_value = ID_AA64ISAR0_TLB_RANGE,
>> + },
>> {},
>> };
>>
>> --
>> 2.19.1
>>
>>
>
> .
>

\
 
 \ /
  Last update: 2019-11-12 03:20    [W:0.099 / U:1.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site