lkml.org 
[lkml]   [2019]   [Nov]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] RISC-V: Add address map dumper
Hi,

On Mon, Nov 11, 2019 at 05:27:25AM +0000, Yash Shah wrote:
> Add support for dumping the kernel address space layout to the console.
> User can enable CONFIG_DEBUG_VM_LAYOUT to dump the virtual memory region
> into dmesg buffer during boot-up.
>
> Signed-off-by: Yash Shah <yash.shah@sifive.com>
> ---
> This patch is based on Linux 5.4-rc6 and tested on SiFive HiFive Unleashed
> board.
> ---
> arch/riscv/Kconfig.debug | 9 +++++++++
> arch/riscv/mm/init.c | 30 ++++++++++++++++++++++++++++++
> 2 files changed, 39 insertions(+)
>
> diff --git a/arch/riscv/Kconfig.debug b/arch/riscv/Kconfig.debug
> index e69de29..cdedfd3 100644
> --- a/arch/riscv/Kconfig.debug
> +++ b/arch/riscv/Kconfig.debug
> @@ -0,0 +1,9 @@
> +config DEBUG_VM_LAYOUT
I believe this could be enabled when CONFIG_DEBUG_VM=y without adding yet
another architecture specific Kconfig option.

> + bool "Print virtual memory layout on boot up"
> + depends on DEBUG_KERNEL
> + help
> + Say Y here if you want to dump the kernel virtual memory layout to
> + dmesg log on boot up. This information is only useful for kernel
> + developers who are working in architecture specific areas of the
> + kernel. It is probably not a good idea to enable this feature in a
> + production kernel.
> diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
> index 79cfb35..fcb8144 100644
> --- a/arch/riscv/mm/init.c
> +++ b/arch/riscv/mm/init.c
> @@ -55,6 +55,36 @@ void __init mem_init(void)
> memblock_free_all();
>
> mem_init_print_info(NULL);
> +#ifdef CONFIG_DEBUG_VM_LAYOUT
> +#define MLK(b, t) b, t, (((t) - (b)) >> 10)
> +#define MLM(b, t) b, t, (((t) - (b)) >> 20)
> +#define MLK_ROUNDUP(b, t) b, t, DIV_ROUND_UP(((t) - (b)), SZ_1K)
> +
> +
> + pr_notice("Virtual kernel memory layout:\n"
> + " fixmap : 0x%08lx - 0x%08lx (%4ld kB)\n"
> + " vmemmap : 0x%08lx - 0x%08lx (%4ld MB)\n"
> + " vmalloc : 0x%08lx - 0x%08lx (%4ld MB)\n"
> + " lowmem : 0x%08lx - 0x%08lx (%4ld MB)\n"
> + " .init : 0x%px - 0x%px (%4td kB)\n"
> + " .text : 0x%px - 0x%px (%4td kB)\n"
> + " .data : 0x%px - 0x%px (%4td kB)\n"
> + " .bss : 0x%px - 0x%px (%4td kB)\n",
> +
> + MLK(FIXADDR_START, FIXADDR_TOP),
> + MLM(VMEMMAP_START, VMEMMAP_END),
> + MLM(VMALLOC_START, VMALLOC_END),
> + MLM(PAGE_OFFSET, (unsigned long)high_memory),
> +
> + MLK_ROUNDUP(__init_begin, __init_end),
> + MLK_ROUNDUP(_text, _etext),
> + MLK_ROUNDUP(_sdata, _edata),
> + MLK_ROUNDUP(__bss_start, __bss_stop));
> +
> +#undef MLK
> +#undef MLM
> +#undef MLK_ROUNDUP
> +#endif
> }
>
> #ifdef CONFIG_BLK_DEV_INITRD
> --
> 2.7.4
>

--
Sincerely yours,
Mike.

\
 
 \ /
  Last update: 2019-11-11 22:57    [W:0.065 / U:0.800 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site