lkml.org 
[lkml]   [2019]   [Nov]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] reset: brcmstb: Fix resource checks
Date
The use of IS_ALIGNED() is incorrect, the typical resource we pass looks
like this: start: 0x8404318, size: 0x30. When using IS_ALIGNED() we will
get the following 0x8404318 & (0x18 - 1) = 0x10 which is definitively
not equal to 0, same goes with the size.

Replace this with an appropriate check on the start address and the
resource size to be a multiple of SW_INIT_BANK_SIZE.

Fixes: 77750bc089e4 ("reset: Add Broadcom STB SW_INIT reset controller driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
Changes in v2:

- simply check that the resource size is at least SW_INIT_BANK_SIZE

drivers/reset/reset-brcmstb.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/reset/reset-brcmstb.c b/drivers/reset/reset-brcmstb.c
index a608f445dad6..208a87aaee53 100644
--- a/drivers/reset/reset-brcmstb.c
+++ b/drivers/reset/reset-brcmstb.c
@@ -91,8 +91,8 @@ static int brcmstb_reset_probe(struct platform_device *pdev)
return -ENOMEM;

res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!IS_ALIGNED(res->start, SW_INIT_BANK_SIZE) ||
- !IS_ALIGNED(resource_size(res), SW_INIT_BANK_SIZE)) {
+ if ((res->start & SW_INIT_BANK_SIZE) != SW_INIT_BANK_SIZE ||
+ !DIV_ROUND_DOWN_ULL(resource_size(res), SW_INIT_BANK_SIZE)) {
dev_err(kdev, "incorrect register range\n");
return -EINVAL;
}
--
2.17.1
\
 
 \ /
  Last update: 2019-11-01 05:19    [W:0.116 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site